Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 Mar 2002 11:22:54 +1100
From:      "Scott Penno" <scott.penno@gennex.com.au>
To:        <freebsd-mobile@freebsd.org>
Subject:   Problems
Message-ID:  <002301c1c637$95abf4e0$0128a8c0@jupiter>

next in thread | raw e-mail | index | archive | help
Hi there,

I've recently upraded from my Toshiba Satellite to a Dell Inspiron 2500.
After initial problems booting FreeBSD 4.5 on the i2500, I'm now at the
point where I'd love to have either of my two network cards working.  One is
a 3Com 3C589D and the other is a Xircom RBEM56G-100.
When the rc.pccard is run upon booting, the following message appears:
pccardc:
ioctl (PIOCRWMEM)
:
Invalid argument

When I run pccardc pccardmem <memadd> with any address larger than a 16 bit
value, the same error is reported.  Upon inserting either cards, I received
the following message:
Mar  6 08:52:19 jupiter pccardd[39]: No card in database for
"(null)"("(null)")
Anyone seen this before or have any tips on what the problem is?
Upon inserting the Xircom card I receive the following:
pcic0: Card type 32-bit cardbus is unsupported
Is the Xircom card (cardbus) supported under FreeBSD 4.5?

Entire dmesg attached for reference.

Regards,

Scott.

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #2: Wed Mar  6 08:46:44 EST 2002
    root@jupiter.gennex.com.au:/usr/src/sys/compile/JUPITER
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory  = 266797056 (260544K bytes)
avail memory = 256188416 (250184K bytes)
Preloaded elf kernel "kernel" at 0xc0360000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.0 on pci1
pcic0: PCI Memory allocated: 0x44000000
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.1 on pci1
pcic1: PCI Memory allocated: 0x44001000
pcic1: Warning: O2micro OZ68xx chips may not work
pccard1: <PC Card bus (classic)> on pcic1
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f
irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1880-0x189f
irq 5 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA (ICH2)> port 0x1840-0x187f,0x1c00-0x1cff irq 5 at
device 31.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd0000-0xd3fff,0xd4000-0xd7fff
on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 19077MB <HITACHI_DK23CA-20> [38760/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pcic0: Card type 32-bit cardbus is unsupported
swapon: adding /dev/ad0s2b as swap device
swapon: adding /dev/ad0s2e as swap device
Automatic boot in progress...
/dev/ad0s2a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2a:
clean, 4371441 free
(13185 frags, 544782 blocks, 0.3% fragmentation)
Setup PC-CARD:
pccardc:
ioctl (PIOCRWMEM)
:
Invalid argument
 beep
 pccardd
.
Doing initial network setup:
 hostname
.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
 inet 127.0.0.1 netmask 0xff000000
Additional routing options:
 TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
 syslogd
.
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting standard daemons:
 inetd
 cron
 sshd
.
Initial rc.i386 initialization:
.
Configuring syscons:
 blanktime
.
Additional ABI support:
.
Local package initialization:
.
Additional TCP options:
.

Wed Mar  6 08:50:33 EST 2002
Mar  6 08:50:49 jupiter login: ROOT LOGIN (root) ON ttyv1
pcic0: Card type 32-bit cardbus is unsupported
pccard: card inserted, slot 0
Mar  6 08:52:19 jupiter pccardd[39]: No card in database for
"(null)"("(null)")
pccard: card removed, slot 0






To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002301c1c637$95abf4e0$0128a8c0>