Date: Fri, 17 Sep 2021 21:37:28 GMT From: Kevin Bowling <kbowling@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-main@FreeBSD.org Subject: git: e8e3171d992f - main - e1000: increase timeout for ME ULP exit Message-ID: <202109172137.18HLbS8S056182@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch main has been updated by kbowling (ports committer): URL: https://cgit.FreeBSD.org/src/commit/?id=e8e3171d992f3255cc8e5a0f59912d07679cc94c commit e8e3171d992f3255cc8e5a0f59912d07679cc94c Author: Guinan Sun <guinanx.sun@intel.com> AuthorDate: 2020-07-06 08:12:09 +0000 Commit: Kevin Bowling <kbowling@FreeBSD.org> CommitDate: 2021-09-17 21:23:07 +0000 e1000: increase timeout for ME ULP exit Due timing issues in WHL and since recovery by host is not always supported, increased timeout for Manageability Engine(ME) to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration. Signed-off-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Guinan Sun <guinanx.sun@intel.com> Reviewed-by: Wei Zhao <wei.zhao1@intel.com> Approved by: imp Obtained from: DPDK (cf1f3ca45d33e793ca581200b4000c39a798113e) MFC after: 1 week --- sys/dev/e1000/e1000_ich8lan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sys/dev/e1000/e1000_ich8lan.c b/sys/dev/e1000/e1000_ich8lan.c index 1d15881f047d..8ca0fb392805 100644 --- a/sys/dev/e1000/e1000_ich8lan.c +++ b/sys/dev/e1000/e1000_ich8lan.c @@ -1413,6 +1413,7 @@ out: s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) { s32 ret_val = E1000_SUCCESS; + u8 ulp_exit_timeout = 30; u32 mac_reg; u16 phy_reg; int i = 0; @@ -1434,10 +1435,12 @@ s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) E1000_WRITE_REG(hw, E1000_H2ME, mac_reg); } - /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */ + if (hw->mac.type == e1000_pch_cnp) + ulp_exit_timeout = 100; + while (E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_ULP_CFG_DONE) { - if (i++ == 30) { + if (i++ == ulp_exit_timeout) { ret_val = -E1000_ERR_PHY; goto out; }
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202109172137.18HLbS8S056182>