Date: Fri, 16 May 2008 09:04:57 -0700 From: "Jack Vogel" <jfvogel@gmail.com> To: "Prokofiev S.P." <proks@logos.sky.od.ua> Cc: freebsd-net@freebsd.org Subject: Re: em0: watchdog timeout -- resetting Message-ID: <2a41acea0805160904g7dcf9f58rf69ca5d0612945cc@mail.gmail.com> In-Reply-To: <20080516185813.H866@logos.sky.od.ua> References: <20080516185813.H866@logos.sky.od.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Did you ever install the fix to the 82573 NIC eeprom? If not search mail archive for 82573, it's a DOS binary that will patch your prom. Also check for BIOS update from SM. Jack On Fri, May 16, 2008 at 8:58 AM, Prokofiev S.P. <proks@logos.sky.od.ua> wrote: > > Hi All! > > I have a problem with Intel NIC after upgrade from > 7-STABLE(25Mar2008,<Intel(R) PRO/1000 Network Connection Version - 6.7.3>) > to 7-STABLE(5May2008,<Intel(R) PRO/1000 Network Connection 6.9.0>) > on motherboard Supermicro PDSMi-LN4+ > http://www.supermicro.com/products/motherboard/Xeon3000/3000/PDSMi-LN4+.cfm > > The NIC em0 is hangup at 16May with messages: > > May 16 12:57:18 sphinx kernel: em0: watchdog timeout -- resetting > May 16 12:57:18 sphinx kernel: em0: Hardware Initialization Failed > May 16 12:57:18 sphinx kernel: em0: Unable to initialize the hardware > May 16 12:59:09 sphinx kernel: em0: link state changed to DOWN > >> kenv | grep smbios: > > smbios.bios.reldate="08/27/2007" > smbios.bios.vendor="Phoenix Technologies LTD" > smbios.bios.version="6.00" > smbios.chassis.maker="Supermicro" > smbios.chassis.serial="0123456789" > smbios.chassis.tag=" " > smbios.chassis.version="0123456789" > smbios.planar.maker="Supermicro" > smbios.planar.product="PDSMi-LN4+" > smbios.planar.serial="0123456789" > smbios.planar.version="PCB Version" > smbios.socket.enabled="1" > smbios.socket.populated="1" > smbios.system.maker="Supermicro" > smbios.system.product="PDSMi-LN4" > smbios.system.serial="0123456789" > smbios.system.uuid="7634a964-b127-0430-c299-0030489144c8" > smbios.system.version="0123456789" > >> pciconf -lv > > hostb0@pci0:0:0:0: class=0x060000 card=0x828015d9 chip=0x27788086 > rev=0xc0 hdr=0x00 > vendor = 'Intel Corporation' > device = 'E7230/3000/3010 Processor to I/O Controller' > class = bridge > subclass = HOST-PCI > pcib1@pci0:0:1:0: class=0x060400 card=0x828015d9 chip=0x27798086 > rev=0xc0 hdr=0x01 > vendor = 'Intel Corporation' > device = 'E7230/3000/3010 PCIe Root Port' > class = bridge > subclass = PCI-PCI > pcib3@pci0:0:28:0: class=0x060400 card=0x828015d9 chip=0x27d08086 > rev=0x01 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pcib4@pci0:0:28:1: class=0x060400 card=0x00000000 chip=0x27d28086 > rev=0x01 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pcib5@pci0:0:28:2: class=0x060400 card=0x00000000 chip=0x27d48086 > rev=0x01 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pcib6@pci0:0:28:3: class=0x060400 card=0x828015d9 chip=0x27d68086 > rev=0x01 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pcib7@pci0:0:30:0: class=0x060401 card=0x828015d9 chip=0x244e8086 > rev=0xe1 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface > to PCI Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:0:31:0: class=0x060100 card=0x828015d9 chip=0x27b88086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface > Controller - 27B8' > class = bridge > subclass = PCI-ISA > atapci0@pci0:0:31:1: class=0x01018a card=0x828015d9 chip=0x27df8086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) Ultra ATA Storage Controller' > class = mass storage > subclass = ATA > atapci1@pci0:0:31:2: class=0x010601 card=0x828015d9 chip=0x27c18086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GB I/O Controller Hub SATA cc=AHCI' > class = mass storage > ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x828015d9 chip=0x27da8086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) SMBus Controller' > class = serial bus > subclass = SMBus > pcib2@pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x032c8086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = '6702PXH PCI Express-to-PCI Express Bridge' > class = bridge > subclass = PCI-PCI > ioapic0@pci0:1:0:1: class=0x080020 card=0x828015d9 chip=0x03268086 > rev=0x09 hdr=0x00 > vendor = 'Intel Corporation' > device = '6700/6702PXH I/OxAPIC Interrupt Controller A' > class = base peripheral > subclass = interrupt controller > em0@pci0:9:0:0: class=0x020000 card=0x108c15d9 chip=0x108c8086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82573E Intel Corporation 82573E Gigabit Ethernet Controller > (Copper)' > class = network > subclass = ethernet > em1@pci0:10:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = '82573L Intel PRO/1000 PL Network Adaptor' > class = network > subclass = ethernet > em2@pci0:11:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = '82573L Intel PRO/1000 PL Network Adaptor' > class = network > subclass = ethernet > em3@pci0:12:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = '82573L Intel PRO/1000 PL Network Adaptor' > class = network > subclass = ethernet > vgapci0@pci0:15:0:0: class=0x030000 card=0x828015d9 chip=0x002018ca > rev=0x00 hdr=0x00 > vendor = 'XGI Technology Inc' > class = display > subclass = VGA > >> dmesg: > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-STABLE #1: Mon May 5 15:48:42 EEST 2008 > proks@sphinx.sky.od.ua:/usr/obj/usr/src/sys/SPHINX > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz (2394.02-MHz 686-class > CPU) > Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2146304000 (2046 MB) > avail memory = 2094850048 (1997 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > acpi0: <PTLTD RSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est0: Setting 1200 MHz > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est1: Setting 1200 MHz > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci9: <ACPI PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0x4000-0x401f mem > 0xee200000-0xee21ffff irq 16 at device 0.0 on pci9 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:30:48:91:44:c8 > pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 > pci10: <ACPI PCI bus> on pcib4 > em1: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0x5000-0x501f mem > 0xee300000-0xee31ffff irq 17 at device 0.0 on pci10 > em1: Using MSI interrupt > em1: [FILTER] > em1: Ethernet address: 00:30:48:91:44:c9 > pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci11: <ACPI PCI bus> on pcib5 > em2: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0x6000-0x601f mem > 0xee400000-0xee41ffff irq 18 at device 0.0 on pci11 > em2: Using MSI interrupt > em2: [FILTER] > em2: Ethernet address: 00:30:48:91:44:ca > pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci12: <ACPI PCI bus> on pcib6 > em3: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0x7000-0x701f mem > 0xee500000-0xee51ffff irq 19 at device 0.0 on pci12 > em3: Using MSI interrupt > em3: [FILTER] > em3: Ethernet address: 00:30:48:91:44:cb > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci15: <ACPI PCI bus> on pcib7 > vgapci0: <VGA-compatible display> port 0x8000-0x807f mem > 0xef000000-0xefffffff,0xee600000-0xee63ffff at device 0.0 on pci15 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3020-0x302f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > atapci1: <Intel AHCI controller> port > 0x3068-0x306f,0x305c-0x305f,0x3060-0x3067,0x3058-0x305b,0x3030-0x303f mem > 0xee000000-0xee0003ff irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > atapci1: AHCI Version 01.10 controller with 4 ports detected > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci1 > ata5: [ITHREAD] > ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x1100-0x111f irq 19 > at device 31.3 on pci0 > ichsmb0: [GIANT-LOCKED] > ichsmb0: [ITHREAD] > smbus0: <System Management Bus> on ichsmb0 > smb0: <SMBus generic I/O> on smbus0 > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > NULL mp in getnewvnode() > Timecounters tick every 1.000 msec > ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding > enabled, default to accept, logging limited to 200 packets/entry by default > acd0: CDROM <CD-224E-R/1.CA> at ata0-master UDMA33 > ad4: 239372MB <WDC WD2500YS-01SHB1 20.06C06> at ata2-master SATA300 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad4s1a > > Sincerely yours, > Sergey Prokofiev > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a41acea0805160904g7dcf9f58rf69ca5d0612945cc>