Date: Tue, 06 Nov 2001 14:02:23 +0100 From: Eric Dahan <ericdahan@MEIway.com> To: freebsd-questions@freebsd.org Cc: freebsd-tokenring@freebsd.org Subject: =?iso-8859-1?Q?it=B4s_always_in_PROMISC_mode?= Message-ID: <5.1.0.14.0.20011106140137.026fdbd8@ms1.meiway.com>
next in thread | raw e-mail | index | archive | help
--=====================_14703091==_.ALT Content-Type: text/plain; charset="iso-8859-1"; format=flowed Content-Transfer-Encoding: quoted-printable kernel config: # Olicom device pseudo-device token device oltr most of dmesg.boot: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #2: Tue Nov 6 11:27:08 CET 2001 root@gw0.finimetal.fr:/usr/src/sys/compile/GWFIN Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1000.04-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10 = Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CM= OV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 251576320 (245680K bytes) avail memory =3D 242061312 (236388K bytes) Preloaded elf kernel "kernel" at 0xc02d8000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 5 entries at 0xc00f14d0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 0.1 on= pci0 ata0: at 0x1f0 irq 14 on atapci0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xeb800000-0xeb800fff=20 irq 5 at device 1.1 on pci0 sis0: Ethernet address: 00:e0:18:09:c0:0b miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <PCI to PCI bridge (vendor=3D1039 device=3D0001)> at device 2.0 on= pci0 pci1: <PCI bus> on pcib2 pci1: <SiS model 6300 VGA-compatible display device> at 0.0 irq 11 oltr0: <Olicom PCI/II 16/4 Adapter (OC-3137)> port 0x9800-0x983f irq 11 at= =20 device 13.0 on pci0 oltr0: MAC address 00:00:83:2b:1d:73 oltr0: adapter self-test complete (status=3D0) pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata0-master UDMA33 acd0: CDROM <ASUS CD-S500/A> at ata0-slave using PIO4 Mounting root from ufs:/dev/ad0s2a oltr0: driver status Type =3D 3 oltr0: ring insert (16 Mbps - TKP) -------------------------------------- 1. When we bring up the 3137 (or 3140), it=B4s always in PROMISC mode. This= =20 didn=B4t occur on a 4.2R machine where we DL'ed the driver ourselves (rather= =20 than use the kernel driver of 4.4R or ourselves) and has been running +one= =20 year error free. oltr0: flags=3D143<UP,BROADCAST,RUNNING,PROMISC> mtu 1500 ^^^^^^^ inet 192.168.250.1 netmask 0xffffff00 broadcast 192.168.250.255 lladdr 00:00:83:2b:1d:73 it's not a DHCP address and the Token Ring network has only one node (The=20 Gateway). - rc.conf defaultrouter=3D"192.168.253.254" gateway_enable=3D"YES" hostname=3D"gw0.xxxxxxxx" ifconfig_sis0=3D"inet 192.168.253.56 netmask 255.255.255.0" ifconfig_oltr0=3D"inet 192.168.250.1 netmask 255.255.255.0" keymap=3D"fr.iso.acc" sendmail_enable=3D"NO" sshd_enable=3D"YES" portmap_enable=3D"NO" Thanks. Eric DAHAN. MEI 25 Avenue des Bretagnes 93230 ROMAINVILLE Tel : 01.41.71.06.06. Fax : 01.41.71.06.04. Centre de formation agr=E9e N=B011752906075 www.meiway.com Eric DAHAN. MEI 25 Avenue des Bretagnes 93230 ROMAINVILLE Tel : 01.41.71.06.06. Fax : 01.41.71.06.04. Centre de formation agr=E9e N=B011752906075 www.meiway.com --=====================_14703091==_.ALT Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> kernel config: <br> # Olicom device <br> pseudo-device <br> token device oltr<br><br> <br> most of dmesg.boot: <br><br> Copyright (c) 1992-2001 The FreeBSD Project.<br> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br> The Regents of the University of California. All rights reserved.<br> FreeBSD 4.4-RELEASE #2: Tue Nov 6 11:27:08 CET 2001<br> root@gw0.finimetal.fr:/usr/src/sys/compile/GWFIN<br> Timecounter "i8254" frequency 1193182 Hz<br> CPU: Pentium III/Pentium III Xeon/Celeron (1000.04-MHz 686-class CPU)<br> Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10<br> Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE><br> real memory =3D 251576320 (245680K bytes)<br> avail memory =3D 242061312 (236388K bytes)<br> Preloaded elf kernel "kernel" at 0xc02d8000.<br> Pentium Pro MTRR support enabled<br> md0: Malloc disk<br> Using $PIR table, 5 entries at 0xc00f14d0<br> npx0: <math processor> on motherboard<br> npx0: INT 16 interface<br> pcib0: <Host to PCI bridge> on motherboard<br> pci0: <PCI bus> on pcib0<br> atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 0.1 on pci0<br> ata0: at 0x1f0 irq 14 on atapci0<br> isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0<br> isa0: <ISA bus> on isab0<br> sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xeb800000-0xeb800fff irq 5 at device 1.1 on pci0<br> sis0: Ethernet address: 00:e0:18:09:c0:0b<br> miibus0: <MII bus> on sis0<br> ukphy0: <Generic IEEE 802.3u media interface> on miibus0<br> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto<br> pcib2: <PCI to PCI bridge (vendor=3D1039 device=3D0001)> at device 2.0 on pci0<br> pci1: <PCI bus> on pcib2<br> pci1: <SiS model 6300 VGA-compatible display device> at 0.0 irq 11<br> oltr0: <Olicom PCI/II 16/4 Adapter (OC-3137)> port 0x9800-0x983f irq 11 at device 13.0 on pci0<br> oltr0: MAC address 00:00:83:2b:1d:73<br> oltr0: adapter self-test complete (status=3D0)<br> pcib1: <SiS 5591 host to AGP bridge> on motherboard<br> pci2: <PCI bus> on pcib1<br> orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0<br> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<br> fdc0: FIFO enabled, 8 bytes threshold<br> fd0: <1440-KB 3.5" drive> on fdc0 drive 0<br> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0<br> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0<br> kbd0 at atkbd0<br> psm0: <PS/2 Mouse> irq 12 on atkbdc0<br> psm0: model MouseMan+, device ID 0<br> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br> sc0: <System console> at flags 0x100 on isa0<br> sc0: VGA <16 virtual consoles, flags=3D0x300><br> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0<br> sio0: type 16550A<br> sio1 at port 0x2f8-0x2ff irq 3 on isa0<br> sio1: type 16550A<br> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0<br> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode<br> ppc0: FIFO with 16/16/16 bytes threshold<br> plip0: <PLIP network interface> on ppbus0<br> lpt0: <Printer> on ppbus0<br> lpt0: Interrupt-driven port<br> ppi0: <Parallel I/O> on ppbus0<br> ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata0-master UDMA33<br> acd0: CDROM <ASUS CD-S500/A> at ata0-slave using PIO4<br> Mounting root from ufs:/dev/ad0s2a<br> oltr0: driver status Type =3D 3<br> oltr0: ring insert (16 Mbps - TKP)<br><br> --------------------------------------<br><br> 1. When we bring up the 3137 (or 3140), it=B4s always in PROMISC mode. This didn=B4t occur on a 4.2R machine where we DL'ed the driver ourselves (rather than use the kernel driver of 4.4R or ourselves) and has been running +one year error free.<br><br> <br> oltr0: flags=3D143<UP,BROADCAST,RUNNING,PROMISC> mtu 1500<br> =20 =20 &nbs= p; ^^^^^^^<br> inet 192.168.250.1 netmask 0xffffff00 broadcast 192.168.250.255<br> lladdr 00:00:83:2b:1d:73<br><br> <br> it's not a DHCP address and the Token Ring network has only one node (The Gateway).<br><br> - rc.conf<br><br> defaultrouter=3D"192.168.253.254"<br> gateway_enable=3D"YES"<br> hostname=3D"gw0.xxxxxxxx"<br> ifconfig_sis0=3D"inet 192.168.253.56 netmask 255.255.255.0"<br> ifconfig_oltr0=3D"inet 192.168.250.1 netmask 255.255.255.0"<br> keymap=3D"fr.iso.acc"<br> sendmail_enable=3D"NO"<br> sshd_enable=3D"YES"<br> portmap_enable=3D"NO"<br><br> <br> Thanks.<br><br> <br> <x-sigsep><p></x-sigsep> Eric DAHAN.<br> <b>MEI<br> </b>25 Avenue des Bretagnes<br> 93230 ROMAINVILLE<br> Tel : 01.41.71.06.06.<br> Fax : 01.41.71.06.04.<br> <font size=3D1><b><i>Centre de formation agr=E9e N=B011752906075<br> </i></b></font><a href=3D"http://www.meiway.com/" eudora=3D"autourl">www.mei= way.com</a> <br> Eric DAHAN.<br> <b>MEI<br> </b>25 Avenue des Bretagnes<br> 93230 ROMAINVILLE<br> Tel : 01.41.71.06.06.<br> Fax : 01.41.71.06.04.<br> <font size=3D1><b><i>Centre de formation agr=E9e N=B011752906075<br> </i></b></font><a href=3D"http://www.meiway.com/" eudora=3D"autourl">www.mei= way.com</a></html> --=====================_14703091==_.ALT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-tokenring" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20011106140137.026fdbd8>