Date: Tue, 01 Feb 2005 04:34:40 +0900 From: Hajimu UMEMOTO <ume@freebsd.org> To: Lukasz Stelmach <Lukasz.Stelmach@k.telmark.waw.pl> Cc: freebsd-net@freebsd.org Subject: Re: if_stf and rfc1918 Message-ID: <ygeacqp2y0f.wl%ume@mahoroba.org> In-Reply-To: <20050130235357.GA72888@tygrys.k.telmark.waw.pl> References: <20050130235357.GA72888@tygrys.k.telmark.waw.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
>>>>> On Mon, 31 Jan 2005 00:53:57 +0100
>>>>> Lukasz Stelmach <Lukasz.Stelmach@telmark.waw.pl> said:
Lukasz> Once I've discussed this matter with Hajimu UMEMOTO and he posted a patch
Lukasz> that made it possible to run 6to4 router behind a nat (FreeBSD 4.x). Soon
Lukasz> I will probably be upgrading my old system to 5.x release so I checked
Lukasz> if newer stf code allows such operation and to my disapointment I've
Lukasz> found out that it doesn't (or at least it seems so). The comment in the
Lukasz> code says that it is a requirement of RFC3056. I've check it and in fact
Lukasz> it says that RFC1918 addresses MUST NOT be used as NLAs in 6to4 addresses.
Lukasz> But IMHO it does not mean that I can't run my 6to4 router behind a NAT
Lukasz> at all. In such a situation the IPv6 address contains valid public IPv4
Lukasz> address and the private one in the IPv4 header is substitutet by NAT. So
Lukasz> after the packets leave my site they are completly valid 6to4 packets.
Lukasz> Also when 6to4 packets come to me they are handeled properly.
Lukasz> My question now is why FreeBSD is so restrictive about it.
Oops, I completely forget this issue. If there is no objection, I'll
commit following patch into HEAD then MFC to RELENG_5.
Index: share/man/man4/stf.4
diff -u share/man/man4/stf.4.orig share/man/man4/stf.4
--- share/man/man4/stf.4.orig Sat Jan 4 14:15:26 2003
+++ share/man/man4/stf.4 Tue Feb 1 02:05:05 2005
@@ -178,6 +178,17 @@
Note, however, there are other security risks exist.
If you wish to use the configuration,
you must not advertise your 6to4 address to others.
+.Pp
+You can configure to use 6to4 from behind NAT by setting the
+.Xr sysctl 8
+variable
+.Va net.link.stf.no_addr4check
+to 1 with support of your NAT box. In this case, make sure to use a
+6to4 address which is worked out from an IPv4 global address of your
+NAT box. If you are directly connected to the Internet, you shouldn't
+chenge the value of
+.Va net.link.stf.no_addr4check .
+This is only hack to use 6to4 from within a NAT.
.\"
.Sh EXAMPLES
Note that
Index: sys/net/if_stf.c
diff -u -p sys/net/if_stf.c.orig sys/net/if_stf.c
--- sys/net/if_stf.c.orig Thu Jan 13 00:47:31 2005
+++ sys/net/if_stf.c Tue Feb 1 04:00:34 2005
@@ -89,6 +89,7 @@
#include <sys/module.h>
#include <sys/protosw.h>
#include <sys/queue.h>
+#include <sys/sysctl.h>
#include <machine/cpu.h>
#include <sys/malloc.h>
@@ -183,6 +184,13 @@ static int stf_clone_destroy(struct if_c
struct if_clone stf_cloner = IFC_CLONE_INITIALIZER(STFNAME, NULL, 0,
NULL, stf_clone_match, stf_clone_create, stf_clone_destroy);
+SYSCTL_DECL(_net_link);
+SYSCTL_NODE(_net_link, IFT_STF, stf, CTLFLAG_RW, 0, "6to4 Interface");
+
+static int no_addr4check = 0;
+SYSCTL_INT(_net_link_stf, OID_AUTO, no_addr4check, CTLFLAG_RW,
+ &no_addr4check, 0, "Skip checking outer IPv4 address");
+
static int
stf_clone_match(struct if_clone *ifc, const char *name)
{
@@ -357,9 +365,17 @@ stf_encapcheck(m, off, proto, arg)
* local 6to4 address.
* success on: dst = 10.1.1.1, ia6->ia_addr = 2002:0a01:0101:...
*/
- if (bcmp(GET_V4(&ia6->ia_addr.sin6_addr), &ip.ip_dst,
- sizeof(ip.ip_dst)) != 0)
- return 0;
+ if (no_addr4check) {
+ struct ifnet *tif;
+
+ INADDR_TO_IFP(ip.ip_dst, tif);
+ if (!tif)
+ return 0;
+ } else {
+ if (bcmp(GET_V4(&ia6->ia_addr.sin6_addr), &ip.ip_dst,
+ sizeof(ip.ip_dst)) != 0)
+ return 0;
+ }
/*
* check if IPv4 src matches the IPv4 address derived from the
@@ -401,12 +417,14 @@ stf_getsrcifa6(ifp)
if (!IN6_IS_ADDR_6TO4(&sin6->sin6_addr))
continue;
- bcopy(GET_V4(&sin6->sin6_addr), &in, sizeof(in));
- LIST_FOREACH(ia4, INADDR_HASH(in.s_addr), ia_hash)
- if (ia4->ia_addr.sin_addr.s_addr == in.s_addr)
- break;
- if (ia4 == NULL)
- continue;
+ if (!no_addr4check) {
+ bcopy(GET_V4(&sin6->sin6_addr), &in, sizeof(in));
+ LIST_FOREACH(ia4, INADDR_HASH(in.s_addr), ia_hash)
+ if (ia4->ia_addr.sin_addr.s_addr == in.s_addr)
+ break;
+ if (ia4 == NULL)
+ continue;
+ }
return (struct in6_ifaddr *)ia;
}
@@ -511,8 +529,10 @@ stf_output(ifp, m, dst, rt)
bzero(ip, sizeof(*ip));
- bcopy(GET_V4(&((struct sockaddr_in6 *)&ia6->ia_addr)->sin6_addr),
- &ip->ip_src, sizeof(ip->ip_src));
+ if (!no_addr4check)
+ bcopy(GET_V4(
+ &((struct sockaddr_in6 *)&ia6->ia_addr)->sin6_addr),
+ &ip->ip_src, sizeof(ip->ip_src));
bcopy(&in4, &ip->ip_dst, sizeof(ip->ip_dst));
ip->ip_p = IPPROTO_IPV6;
ip->ip_ttl = ip_stf_ttl;
@@ -587,13 +607,6 @@ stf_checkaddr4(sc, in, inifp)
}
/*
- * reject packets with private address range.
- * (requirement from RFC3056 section 2 1st paragraph)
- */
- if (isrfc1918addr(in))
- return -1;
-
- /*
* reject packets with broadcast
*/
for (ia4 = TAILQ_FIRST(&in_ifaddrhead);
@@ -645,7 +658,16 @@ stf_checkaddr6(sc, in6, inifp)
*/
if (IN6_IS_ADDR_6TO4(in6)) {
struct in_addr in4;
+
bcopy(GET_V4(in6), &in4, sizeof(in4));
+
+ /*
+ * reject packets with private address range.
+ * (requirement from RFC3056 section 2 1st paragraph)
+ */
+ if (isrfc1918addr(&in4))
+ return -1;
+
return stf_checkaddr4(sc, &in4, inifp);
}
@@ -694,6 +716,18 @@ in_stf_input(m, off)
#ifdef MAC
mac_create_mbuf_from_ifnet(ifp, m);
#endif
+
+ /*
+ * Skip RFC1918 check against dest address to allow incoming
+ * packets with private address for dest. Though it may
+ * breasks the requirement from RFC3056 section 2 1st
+ * paragraph, it helps for 6to4 over NAT.
+ */
+ if ((!no_addr4check && isrfc1918addr(&ip->ip_dst)) ||
+ isrfc1918addr(&ip->ip_src)) {
+ m_freem(m);
+ return;
+ }
/*
* perform sanity check against outer src/dst.
Sincerely,
--
Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan
ume@mahoroba.org ume@{,jp.}FreeBSD.org
http://www.imasy.org/~ume/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ygeacqp2y0f.wl%ume>