Date: Wed, 03 May 2023 07:43:29 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 271062] add support for 28xx based device to isp(4) Message-ID: <bug-271062-227-HffTxkylyN@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-271062-227@https.bugs.freebsd.org/bugzilla/> References: <bug-271062-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D271062 Joerg Pulz <Joerg.Pulz@frm2.tum.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #241908|0 |1 is obsolete| | --- Comment #11 from Joerg Pulz <Joerg.Pulz@frm2.tum.de> --- Created attachment 241948 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=3D241948&action= =3Dedit patch v5 for CURRENT and RELENG-13.2 Use the FLT on all supported controllers but explicit leave the 26xx ones i= s. The 26xx are a bit special as those are known as 83xx (2031 and 8031 for re= al). I don't have such a device around so i will investigate the 26xx later. Cosmetics: - rename functions and defines as they are no longer specific to 28xx - set reasonable log levels - sort FLT and NVRAM functions (in the order they are used) Tested and approved to work on real hardware with: - Qlogic ISP 2532 (QLogic QLE2562 8Gb 2Port FC Adapter) - Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter) - Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter) dmesg(8) debug outputs (slightly stripped to the most important parts) for Qlogic ISP 2532 (QLogic QLE2562 8Gb 2Port FC Adapter) ----- isp0: <Qlogic ISP 2532 PCI FC-AL Adapter> port 0x8200-0x82ff mem 0xb8a04000-0xb8a07fff,0xb8900000-0xb89fffff at device 0.0 numa-domain 0 on = pci9 isp0: loaded firmware isp_2500 isp0: set PCI line size to 16 from 0 isp0: set PCI latency to 64 isp0: Board Type 2532, Chip Revision 0x2, resident F/W Revision 8.7.0 isp0: Attributes: Class2 MultiID T10CRC MQ MSIX VP0_Decoupling NPMOFF isp0: 2048 max I/O command limit set isp0: request area @ 0x1f7e56000/0x80000 isp0: response area @ 0x1f7ed6000/0x10000 isp0: FLTL[DEF]: 0x50400 isp0: FLT[DEF]: version=3D0x1 length=3D0x290(656) checksum=3D0xb62a isp0: FLT[DEF]: regions=3D40 <skipped FLT regions parsing debug output> isp0: FLT[FLT]: boot=3D0x0 fw=3D0x20000 vpd_nvram=3D0x48000 vpd=3D0x48000 n= vram 0x48080 fdt=3D0x50000 flt=3D0x50400 npiv=3D0x5c000 fcp_prif_cfg=3D0x3c000 isp0: NVRAM 0x0000000000000000 0x21000024ff3f6fc8 maxframelen 2048 isp0: NVRAM loopid 0 fwopt1 0x2006 fwopt2 0x20 fwopt3 0x4008 isp0: Chan 0 0x20000024ff3f6fc8/0x21000024ff3f6fc8 Role Initiator isp0: Setting ICB Node 0x20000024ff3f6fc8 Port 0x21000024ff3f6fc8 isp0: isp_init: fwopt1 0x6006 fwopt2 0x1020 fwopt3 0x402a isp0: isp_init: rqst 00000001f7e56000 rsp 00000001f7ed6000 isp0: isp_init: isp0: 0x00000000: 01 00 00 00 00 08 ff ff 00 00 00 00 21 00 00 24 isp0: 0x00000010: ff 3f 6f c8 20 00 00 24 ff 3f 6f c8 00 00 00 00 isp0: 0x00000020: 03 00 00 00 00 04 00 20 00 00 00 00 00 60 e5 f7 isp0: 0x00000030: 01 00 00 00 00 60 ed f7 01 00 00 00 00 00 00 00 isp0: 0x00000040: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 isp0: 0x00000050: 00 00 00 00 00 00 00 00 00 00 0a 00 06 60 00 00 isp0: 0x00000060: 20 10 00 00 2a 40 00 00 00 00 00 00 00 00 00 00 isp0: 0x00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 isp0: INIT F/W from 000000011186e000 ----- for Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter) ----- isp0: <Qlogic ISP 2722 PCI FC Adapter> mem 0xb8902000-0xb8902fff,0xb8900000-0xb8901fff,0xb8800000-0xb88fffff at device= 0.0 numa-domain 0 on pci9 isp0: set PCI line size to 16 from 0 isp0: set PCI latency to 64 isp0: loading firmware from flash isp0: Board Type 2700, Chip Revision 0x1, resident F/W Revision 8.8.231 isp0: Attributes: Class2 MultiID T10CRC MQ MSIX VP0_Decoupling HotFW EXMOFF NPMOFF DIFCHOP ASICTMP ATIOMQ (unknown 0x0000020078020000) isp0: 2048 max I/O command limit set isp0: request area @ 0x578e21000/0x80000 isp0: response area @ 0x578ea1000/0x10000 isp0: FLTL[DEF]: 0xfc400 isp0: FLT[DEF]: version=3D0x1 length=3D0x448(1096) checksum=3D0x6e23 isp0: FLT[DEF]: regions=3D68 <skipped FLT regions parsing debug output> isp0: FLT[FLT]: boot=3D0x200000 fw=3D0x240000 vpd_nvram=3D0x270000 vpd=3D0x= 270000 nvram 0x270080 fdt=3D0xfc000 flt=3D0xfc400 npiv=3D0x2a8000 fcp_prif_cfg=3D0x0 isp0: NVRAM 0x0000000000000000 0x210034800d3ebaac maxframelen 2048 isp0: NVRAM loopid 0 fwopt1 0x20c6 fwopt2 0x26 fwopt3 0x4000 isp0: Chan 0 0x200034800d3ebaac/0x210034800d3ebaac Role Initiator isp0: Setting ICB Node 0x200034800d3ebaac Port 0x210034800d3ebaac isp0: isp_init: fwopt1 0x60c6 fwopt2 0x4401026 fwopt3 0x4022 isp0: isp_init: rqst 0000000578e21000 rsp 0000000578ea1000 isp0: isp_init: isp0: 0x00000000: 01 00 00 00 00 08 00 00 00 00 00 00 21 00 34 80 isp0: 0x00000010: 0d 3e ba ac 20 00 34 80 0d 3e ba ac 00 00 00 00 isp0: 0x00000020: 03 00 00 00 00 04 00 20 00 00 00 00 00 10 e2 78 isp0: 0x00000030: 05 00 00 00 00 10 ea 78 05 00 00 00 00 00 00 00 isp0: 0x00000040: 00 00 00 00 01 00 02 00 00 00 00 00 00 00 00 00 isp0: 0x00000050: 00 00 00 00 00 00 00 00 00 00 0a 00 c6 60 00 00 isp0: 0x00000060: 26 10 40 04 22 40 00 00 00 00 00 00 00 00 00 00 isp0: 0x00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 isp0: INIT F/W from 0000000112698000 ----- for Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter) ----- isp2: <Qlogic ISP 2812 PCI FC Adapter> mem 0xeea05000-0xeea05fff,0xeea02000-0xeea03fff,0xee900000-0xee9fffff at device= 0.0 numa-domain 1 on pci14 isp2: set PCI line size to 16 from 0 isp2: set PCI latency to 64 isp2: loading firmware from flash isp2: Board Type 2800, Chip Revision 0x2, resident F/W Revision 9.4.1 isp2: Attributes: Class2 MultiID T10CRC MQ MSIX VP0_Decoupling HotFW EXMOFF NPMOFF DIFCHOP ASICTMP ATIOMQ (unknown 0x0000162078020000) isp2: 2048 max I/O command limit set isp2: request area @ 0x30d6a80000/0x80000 isp2: response area @ 0x30c54f0000/0x10000 isp2: FLTL[DEF]: 0x4400 isp2: FLT[DEF]: version=3D0x1 length=3D0xc38(3128) checksum=3D0xea11 isp2: FLT[DEF]: regions=3D195 <skipped FLT regions parsing debug output> isp2: FLT[FLT]: boot=3D0x240000 fw=3D0xf0000 vpd_nvram=3D0x300000 vpd=3D0x3= 00000 nvram 0x300080 fdt=3D0x4000 flt=3D0x4400 npiv=3D0x320000 fcp_prif_cfg=3D0x338000 isp2: NVRAM 0x2000f4c7aa0212b0 0x2100f4c7aa0212b0 maxframelen 2048 isp2: NVRAM loopid 0 fwopt1 0x6006 fwopt2 0x26 fwopt3 0x4000 isp2: Chan 0 0x2000f4c7aa0212b0/0x2100f4c7aa0212b0 Role Initiator isp2: Setting ICB Node 0x2000f4c7aa0212b0 Port 0x2100f4c7aa0212b0 isp2: isp_init: fwopt1 0x6006 fwopt2 0x4401026 fwopt3 0x4022 isp2: isp_init: rqst 00000030d6a80000 rsp 00000030c54f0000 isp2: isp_init: isp2: 0x00000000: 01 00 00 00 00 08 00 00 00 00 00 00 21 00 f4 c7 isp2: 0x00000010: aa 02 12 b0 20 00 f4 c7 aa 02 12 b0 00 00 00 00 isp2: 0x00000020: 03 00 00 00 00 04 00 20 00 00 00 00 00 00 a8 d6 isp2: 0x00000030: 30 00 00 00 00 00 4f c5 30 00 00 00 00 00 00 00 isp2: 0x00000040: 00 00 00 00 01 00 02 00 00 00 00 00 00 00 00 00 isp2: 0x00000050: 00 00 00 00 00 00 00 00 00 00 0a 00 06 60 00 00 isp2: 0x00000060: 26 10 40 04 22 40 00 00 00 00 00 00 00 00 00 00 isp2: 0x00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 isp2: INIT F/W from 0000003094b09000 --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-271062-227-HffTxkylyN>