Date: Wed, 13 Nov 2002 13:08:08 -0600 (CST) From: "Karl L. Dunn" <kdunn@hiwaay.net> To: freebsd-alpha@freebsd.org Subject: Multia: syscons does not find PCI vga card Message-ID: <Pine.OSF.4.44.0211131303490.445128-100000@fly.hiwaay.net>
index | next in thread | raw e-mail
I have a Multia/UDB (alpha) to which I added a Diamond VGA card in the
internal PCI slot. This has a S3 Trio64V+ chip. The intent is to be able
to run X over FreeBSD 4.6.2.
Linux RH6.0 (boot from the ARC of course) works OK with the S3 card
(XF86_S3), and it worked OK with the internal TGA card (XF86_TGA). But
it's Linux, and I'd much rather have FreeBSD.
The SRM talks only to the TGA. I don't care about that -- I can set it to
autoboot and move the monitor to the S3 VGA and forget about it unless I
want to see it again someday.
The problem is that syscons can't find the S3 VGA (see the verbose dmesg
output below). Maybe this is related to what the SRM leaves behind, but I
doubt it. The kernel here is the GENERIC that came on the 4.6.2 CD I got
from the BSD mall.
Can anybody give me some help here?
If this can't be solved, can the TGA be used for X on 4.6.2, and if so
how? (It looks as if some of the stuff needed is in the source tree.) I
like the S3 card more than the TGA, but I have used the TGA with Linux and
NTalpha (ugh!) for about two years, and it's certainly usable.
---
Karl L. Dunn
k.l.dunn@ieee.org
=======================================================================
Multia/UDB SRM screen after power-up
=======================================================================
Multia SRM Console BL5 V3.8-3, built on Aug 10 1995 at 03:22:55
Testing Memory from 8 to 64 meg...
Executing power-up script...
version BL5 V3.8-3 Aug 10 1995 03:22:55
dka100.1.0.6.0 DKA100 CONNER CFP4207S 4.28GB 1524
dka200.2.0.6.0 DKA200 SEAGATE ST318418N 0003
dka400.4.0.6.0 DKA400 YAMAHA CRW8424S 1.0d
dva0.0.0.0.1 DVA0
ewa0.0.0.8.0 EWA0 08-00-2B-E5-F0-7C
pka0.7.0.6.0 PKA0 SCSI Bus ID 7
64 Meg of system memory
CPU speed is 166 MHZ
Cache size is 256 Kbytes
>>>boot dka200
=======================================================================
dmesg after boot -v (ESC at loader countdown, then boot -v)
=======================================================================
Unrecognized boot flag '0'.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #0: Thu Aug 22 20:40:14 GMT 2002
root@sema.baldwin.cx:/usr/src/sys/compile/GENERIC
DEC AXPpci
(PCI ISA), 167MHz
8192 byte page size, 1 processor.
CPU: LCA Family major=4 minor=2
OSF PAL rev: 0x1000000020123
real memory = 64684032 (63168K bytes)
Physical memory chunk(s):
0x007e2000 - 0x03f0dfff, 57851904 bytes (7062 pages)
avail memory = 55894016 (54584K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007c6000.
md0: Malloc disk
Creating DISK md0
found-> vendor=0x0003, dev=0x0000, revid=0x03
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00010000, size 8
map[14]: type 1, range 32, base 81000000, size 8
found-> vendor=0x8086, dev=0x0484, revid=0x84
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1011, dev=0x0002, revid=0x23
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base 00010100, size 7
map[14]: type 1, range 32, base 81000100, size 7
found-> vendor=0x0000, dev=0x0000, revid=0x00
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
found-> vendor=0x1011, dev=0x0004, revid=0x02
class=03-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 88000000, size 25
found-> vendor=0x5333, dev=0x8811, revid=0x54
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base 84000000, size 26
found-> vendor=0x00c0, dev=0x0000, revid=0x00
class=00-02-00, hdrtype=0x0f, mfdev=0
subordinatebus=0 secondarybus=0
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
dec_axppci_33_intr_map: bad interrupt pin 30
found-> vendor=0x1e02, dev=0x0000, revid=0x02
class=00-00-1e, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=~, irq=2
map[10]: type 1, range 20, base 00001e00, size 9
map[14]: type 1, range 20, base 00001e00, size 9
map[18]: type 1, range 20, base 00001e00, size 9
map[1c]: type 1, range 20, base 00001e00, size 9
map[20]: type 1, range 20, base 00001e00, size 9
map[24]: type 1, range 20, base 00001e00, size 9
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 0.0
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 1.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 2.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 3.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 4.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 5.0 irq 2
sym0: <810> port 0x10000-0x100ff mem 0x81000000-0x810000ff irq 11 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 234 msec, 37984 KHz
sym0: Delay (GEN=11): 291 msec, 30544 KHz
sym0: Delay (GEN=11): 292 msec, 30439 KHz
sym0: interrupting at ISA irq 11
isab0: <Intel 82378IB PCI to ISA bridge> at device 7.0 on pci0
Bus Modes: Bus Park, Resource Lock,
IDE controller: Secondary (170h-177h,376h,377h)
Floppy controller: 370h,371h
Floppy controller: 372h-377h
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Configuration RAM: 0C00h,0800h-08FFh
Port 92: enabled
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81000100-0x8100017f irq 15 at device 8.0 on pci0
de0: interrupting at ISA irq 15
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 08:00:2b:e5:f0:7c
bpf: de0 attached
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 9.0
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 10.0 irq 2
pci0: <unknown card> (vendor=0x1011, dev=0x0004) at 11.0 irq 10
pci0: <S3 Trio graphics accelerator> (vendor=0x5333, dev=0x8811) at 12.0 irq 15
pci0: <unknown card> (vendor=0x00c0, dev=0x0000) at 14.0
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 15.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 16.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 17.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 18.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 19.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 20.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 21.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 22.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 23.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 24.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 25.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 26.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 27.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 28.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 29.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 30.0 irq 2
pci0: <unknown card> (vendor=0x1e02, dev=0x0000) at 31.0 irq 2
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0023
atkbd: keyboard ID 0x83ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0063
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> failed to probe on isa0
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 166646718 Hz (firmware 167166666 Hz)
sio0: irq maps: 0x8044 0x8054 0x8044 0x8044
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 166646718 Hz
bpf: lo0 attached
bpf: ppp0 attached
bpf: sl0 attached
bpf: faith0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
de0: enabling 10baseT port
(probe4:sym0:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe4:sym0:0:4:0): ILLEGAL REQUEST asc:24,0
(probe4:sym0:0:4:0): Invalid field in CDB
Creating DISK da0
Creating DISK da1
Creating DISK cd0
pass0 at sym0 bus 0 target 1 lun 0
pass0: <CONNER CFP4207S 4.28GB 1524> Fixed Direct Access SCSI-2 device
pass0: Serial Number DX90WE4
pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
pass1 at sym0 bus 0 target 2 lun 0
pass1: <SEAGATE ST318418N 0003> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3JJ02ZFE0000724594XN
pass1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
pass2 at sym0 bus 0 target 4 lun 0
pass2: <YAMAHA CRW8424S 1.0d> Removable CD-ROM SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at sym0 bus 0 target 1 lun 0
da0: <CONNER CFP4207S 4.28GB 1524> Fixed Direct Access SCSI-2 device
da0: Serial Number DX90WE4
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
da1 at sym0 bus 0 target 2 lun 0
da1: <SEAGATE ST318418N 0003> Fixed Direct Access SCSI-3 device
da1: Serial Number 3JJ02ZFE0000724594XN
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 19001MB (38914049 512 byte sectors: 255H 63S/T 2422C)
Mounting root from ufs:/dev/da1a
(cd0:sym0:0:4:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:4:0): NOT READY asc:3a,1
(cd0:sym0:0:4:0): Medium not present - tray closed
cd0 at sym0 bus 0 target 4 lun 0
cd0: <YAMAHA CRW8424S 1.0d> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1: invalid primary partition table: no magic
start_init: trying /sbin/init
=======================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.44.0211131303490.445128-100000>