Date: Wed, 14 May 2003 11:08:45 -0500 From: Pete McKenna <pete_mckenna@qwest.net> To: multimedia@FreeBSD.ORG Subject: ffmpeg w/bktr no sound Message-ID: <20030514110845.A3071@blotto.qwest.net>
next in thread | raw e-mail | index | archive | help
I'm still working on getting ffmpeg encoding to work and the video is fine but I get no audio. I have mucked with the mixer settings and such to no avail. I use fxtv to set the channel, for now and when I turn off line in the mixer the fxtv audio dies. It is plugged into the sound cards line in. Based on this I set mixer recsrc to line, but still nothing. It's broadcast NTSC signal. Any other ideas ? capture command ffmpeg -vcodec mpeg1video -b 1200 -s 320x240 -y -t 10.0 test1.mpg ffmpeg -vcodec mpeg4 -b 1200 -s 320x240 -y -t 10.0 test1.avi I play the results with mplayer. here's the dmesg and mixer settings if that helps. Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) processor (850.04-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 268369920 (262080K bytes) avail memory = 256638976 (250624K bytes) Preloaded elf kernel "kernel" at 0xc0492000. netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdee0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 7.2 on pci 0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ulpt0: SAMSUNG ELECTRONICS CO., LT Samsung ML-6060 Series, rev 1.10/1.00, addr 2 , iclass 7/1 uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 7.3 on pci 0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 pcm0: <Creative CT5880-C> port 0xdc00-0xdc3f irq 5 at device 8.0 on pci0 pcm0: <SigmaTel STAC9721/9723 ac97 codec> bktr0: <BrookTree 878> mem 0xea002000-0xea002fff irq 5 at device 11.0 on pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicbus1: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 smb0: <SMBus general purpose I/O> on smbus0 bktr0: Hauppauge Model 61381 D123 bktr0: Detected a MSP3430G-A1 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, remo te control. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 5 de0: <Digital 21140A Fast Ethernet> port 0xe000-0xe07f mem 0xea001000-0xea00107f irq 11 at device 13.0 on pci0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:40:05:a3:a0:99 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xea003000-0xea00 3fff irq 11 at device 15.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: cannot reserve I/O port range IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 500 packets/entry by default IPv6 packet filtering initialized, default to accept, logging limited to 500 pac kets/entry IPsec: Initialized Security Association Processing. ad0: 38166MB <WDC WD400BB-53CAA0> [77545/16/63] at ata0-master UDMA100 ad2: DMA limited to UDMA33, non-ATA66 cable or device Mixer vol is currently set to 90:90 Mixer pcm is currently set to 90:90 Mixer speaker is currently set to 0:0 Mixer line is currently set to 90:90 Mixer mic is currently set to 0:0 Mixer cd is currently set to 0:0 Mixer rec is currently set to 100:100 Mixer ogain is currently set to 0:0 Mixer line1 is currently set to 0:0 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 0:0 -- Peter McKenna Home 651-644-2131 pete_mckenna@qwest.net Cell 651-208-3386
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030514110845.A3071>