Date: Fri, 2 Jan 2015 08:32:32 +0100 From: Sven Kerschbaum <svkers@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: FreeBSD 11-CURRENT image does not boot on the Raspberry PI B Message-ID: <CAM=N1udCpr2RCEsAMGsUGCXeQ0BXh9XcYiB3EcTX1i3ka-No%2Bg@mail.gmail.com> In-Reply-To: <CAJ-VmokJPQ5Q_Qs=A8RK15nd68pVei699op=tUPc%2BGL67EW5Pg@mail.gmail.com> References: <CAM=N1ucDYkmhCyaw_n%2Bqv_xx%2BTwbksK9ndp0O4PET%2BnjMc13tQ@mail.gmail.com> <CAJ-VmokhSGFNbCs-ayH943sh4wRxHsGJbp-3Yp5bYUmTdBRP=A@mail.gmail.com> <7959322F-CE0A-4516-BC68-CE4D3534DD6B@sbcglobal.net> <CAJ-Vmon64mJLTz7NgFsGXDNn9h1PKAKk18ObaJ1aGPcFQ7N=Fw@mail.gmail.com> <CAJ-VmokJPQ5Q_Qs=A8RK15nd68pVei699op=tUPc%2BGL67EW5Pg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Adrian, Hi Thomas and of course Hi list members, Adrian is right, with the newest release r276523 the FreeBSD kernel loads and it is possible to log in. Thanks for your efforts! Keep on the good work! Best regards, Sven 2015-01-02 0:22 GMT+01:00 Adrian Chadd <adrian@freebsd.org>: > Yup: > > 18:21 < loos> yep, committed on r275963 and fixed on r276297 > 18:21 <@rpaulo> right > > > > > -adrian > > > On 1 January 2015 at 15:18, Adrian Chadd <adrian@freebsd.org> wrote: > > Hm, try the most recent -HEAD? I think that's been fixed. > > > > > > > > > > -adrian > > > > > > On 1 January 2015 at 15:15, Thomas Skibo <thomasskibo@sbcglobal.net> > wrote: > >> > >> > >>> On Jan 1, 2015, at 2:30 PM, Adrian Chadd <adrian@freebsd.org> wrote: > >>> > >>> hi! > >>> > >>> can you plug in a serial UART and see if anything else gets spat out > there? > >>> > >>> > >>> > >>> -adrian > >>> > >>> > >> > >> I think I am having the same problem. Here=E2=80=99s the UART output: > >> > >> > >> > >> U-Boot 2013.01-rc1-svn18531 (Dec 24 2014 - 16:51:42) > >> > >> DRAM: 480 MiB > >> WARNING: Caches not enabled > >> MMC: bcm2835_sdhci: 0 > >> Using default environment > >> > >> In: serial > >> Out: lcd > >> Err: lcd > >> mbox: Timeout waiting for response > >> bcm2835: Could not set USB power state > >> Net: Net Initialization Skipped > >> No ethernet found. > >> Hit any key to stop autoboot: 0 > >> reading uEnv.txt > >> 89 bytes read in 8959 ms (0 Bytes/s) > >> Importing environment from mmc ... > >> reading ubldr > >> 251119 bytes read in 56398 ms (3.9 KiB/s) > >> ## Starting application at 0x02000054 ... > >> Consoles: U-Boot console > >> Compatible U-Boot API signature found @1db682a8 > >> > >> FreeBSD/armv6 U-Boot loader, Revision 1.2 > >> (root@grind.freebsd.org, Wed Dec 24 16:51:33 UTC 2014) > >> > >> DRAM: 480MB > >> Number of U-Boot devices: 1 > >> U-Boot env: loaderdev not set, will probe all devices. > >> Found U-Boot device: disk > >> Probing all disk devices... > >> Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. > >> Loading /boot/defaults/loader.conf > >> /boot/kernel/kernel data=3D0x4f54a4+0xb6b5c syms=3D[0x4+0x8cbd0+0x4+0x= 53f47] > >> > >> Hit [Enter] to boot immediately, or any other key for command prompt. > >> Booting [/boot/kernel/kernel] in 5 seconds... Booting > [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]... > >> Using DTB provided by U-Boot at address 0x100. > >> Kernel entry at 0x100100... > >> Kernel args: (null) > >> KDB: debugger backends: ddb > >> KDB: current backend: ddb > >> Copyright (c) 1992-2014 The FreeBSD Project. > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 19= 94 > >> The Regents of the University of California. All rights > reserved. > >> FreeBSD is a registered trademark of The FreeBSD Foundation. > >> FreeBSD 11.0-CURRENT #0 r276066: Wed Dec 24 16:49:32 UTC 2014 > >> root@grind.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm > >> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 201405= 12 > >> VT: init without driver. > >> CPU: ARM1176JZ-S rev 7 (ARM11J core) > >> Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext > >> WB enabled LABT branch prediction enabled > >> 16KB/32B 4-way instruction cache > >> 16KB/32B 4-way write-back-locking-C data cache > >> real memory =3D 536866816 (511 MB) > >> avail memory =3D 483196928 (460 MB) > >> random device not loaded/active; using insecure pseudo-random number > generator > >> random: entropy device infrastructure driver > >> random: selecting highest priority adaptor <Dummy> > >> random: SOFT: yarrow init() > >> random: selecting highest priority adaptor <Yarrow> > >> kbd0 at kbdmux0 > >> ofwbus0: <Open Firmware Device Tree> > >> simplebus0: <Flattened device tree simple bus> mem > 0x20000000-0x20ffffff on ofwbus0 > >> cpulist0: <Open Firmware CPU Group> on ofwbus0 > >> cpu0: <Open Firmware CPU> on cpulist0 > >> bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 > >> intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 > >> systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on > simplebus0 > >> Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000 > >> Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000 > >> bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 > >> gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq > 57,59,58,60 on simplebus0 > >> gpio0: read-only pins: 46,47,48,49,50,51,52,53. > >> gpio0: reserved pins: 48,49,50,51,52,53. > >> gpioc0: <GPIO controller> on gpio0 > >> gpiobus0: <OFW GPIO bus> on gpio0 > >> gpioled0: <GPIO led> at pin(s) 16 on gpiobus0 > >> iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on > simplebus0 > >> iicbus0: <OFW I2C bus> on iichb0 > >> iic0: <I2C generic I/O> on iicbus0 > >> iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on > simplebus0 > >> iicbus1: <OFW I2C bus> on iichb1 > >> iic1: <I2C generic I/O> on iicbus1 > >> spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on > simplebus0 > >> spibus0: <OFW SPI bus> on spi0 > >> bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff > irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0 > >> mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebu= s0 > >> sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq > 70 on simplebus0 > >> mmc0: <MMC/SD bus> on sdhci_bcm0 > >> uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on > simplebus0 > >> uart0: console (115200,n,8,1) > >> dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff > irq 17 on simplebus0 > >> usbus0 on dwcotg0 > >> fb0: <BCM2835 VT framebuffer driver> on ofwbus0 > >> Timecounters tick every 10.000 msec > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get clock rate (id=3D3) > >> usbus0: 480Mbps High Speed USB v2.0 > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get clock rate (id=3D8) > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min clock rate (id=3D3) > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min clock rate (id=3D4) > >> ugen0.1: <DWCOTG> at usbus0 > >> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbu= s0 > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min clock rate (id=3D8) > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get max voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get max voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get max voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get max voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min voltage > >> bcm2835_cpufreq0: mbox response error > >> bcm2835_cpufreq0: can't get min voltage > >> bcm2835_cpufreq0: ARM -999MHz, Core 250MHz, SDRAM -999MHz, Turbo OFF > >> bcm2835_cpufr > >> > >> > >> =E2=80=94=E2=80=94=E2=80=94 > >> Thomas Skibo > >> thomasskibo@sbcglobal.net > >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAM=N1udCpr2RCEsAMGsUGCXeQ0BXh9XcYiB3EcTX1i3ka-No%2Bg>