Date: Wed, 18 Apr 2007 17:38:37 +0800 From: Jason Chang =?big5?B?sWmzx6XN?= <jsc@ntu.edu.tw> To: freebsd-stable@freebsd.org Cc: jsc@ntu.edu.tw Subject: bge watchdog timeout -- resetting problem on recent update Message-ID: <20070418093837.GA32573@ccms.ntu.edu.tw>
next in thread | raw e-mail | index | archive | help
Dear All, After recent cvsup and make world, my server suffered from the bge watchdog timeout -- resetting problem. Manually revert the bge related source to older version and compiled a new kernel may solve the problem. So I guess the recent committed source does not go well with bge nics onboard of IBM e326m servers. 1. server model IBM e326m server with dual AMD opteron cpus http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-61692 bge chipset is Broadcom BCM5714 B3, ASIC rev. 0x8003 2. senario large network i/o results in error: bge0: watchdog timeout -- resetting bge0: link DOWN bge0: link state changed to DOWN bge0: link UP bge0: link state changed to UP 3. how to reproduce just ftp a file larger then 20mb, and the bge will have trouble in 30sec. 4. source version verified to work abnormally. if_bge.c 1.91.2.22 if_bgereg.h 1.36.2.10 brgphy.c 1.34.2.13 5. source version verified to work normally. if_bge.c 1.91.2.19 if_bgereg.h 1.36.2.9 brgphy.c 1.34.2.12 6. system dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #13: Sat Apr 14 10:57:10 CST 2007 root@ccsun52.cc.ntu.edu.tw:/usr/src/sys/amd64/compile/CCSUN52 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8061a000. INTR: Adding local APIC 0 as a target ACPI APIC Table: <AMD BLAST > Calibrating clock(s) ... i8254 clock: 1193293 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2793019707 Hz CPU: AMD Opteron(tm) Processor 254 (2793.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 2146828288 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages) 0x0000000000717000 - 0x000000007c2fcfff, 2076073984 bytes (506854 pages) avail memory = 2066284544 (1970 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 5, Interrupt 16 at 0xfec01000 MADT: Found IO APIC ID 6, Interrupt 32 at 0xfec02000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory> ichwd module loaded io: <I/O> acpi0: <AMD XSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: Power Button (fixed) pci_open(1): mode 1 addr port (0x0cf8) is 0x80016844 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 [class=060400] [hdr=01] is there (id=00361166) AcpiOsDerivePciId: bus 0 dev 24 func 1 unknown: I/O range not supported ACPI timer: 0/4 0/5 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 10 11 Validation 0 255 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 9 11 Validation 0 255 N 0 9 11 After Disable 0 255 N 0 9 11 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 9 11 Validation 0 255 N 0 9 11 After Disable 0 255 N 0 9 11 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode powernow0: <Cool`n'Quiet K8> on cpu0 powernow0: STATUS: 0x4060604141414 powernow0: STATUS: maxfid: 0x14 powernow0: STATUS: maxvid: 0x04 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <Cool`n'Quiet K8> on cpu1 powernow1: STATUS: 0x4060604141414 powernow1: STATUS: maxfid: 0x14 powernow1: STATUS: maxvid: 0x04 device_attach: powernow1 attach returned 6 pcib0: <ACPI Host-PCI bridge> on acpi0 ACPI: Found matching pin for 0.3.INTA at func 0: 10 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002000, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e8011000, size 12, enabled map[14]: type 4, range 32, base 00001000, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e8012000, size 12, enabled map[14]: type 4, range 32, base 00001400, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8013000, size 12, enabled map[14]: type 4, range 32, base 00001800, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU found-> vendor=0x1002, dev=0x515e, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0183, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 00001c00, size 8, enabled map[18]: type 1, range 32, base e8000000, size 16, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 17 found-> vendor=0x1166, dev=0x0130, revid=0xa3 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) found-> vendor=0x1166, dev=0x0130, revid=0xa3 bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe8100000-0xe81fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xb2 bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xe8100000-0xe81fffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x1000, dev=0x0030, revid=0x08 bus=2, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 00003000, size 8, enabled pcib2: requested I/O range 0x3000-0x30ff: in range pcib1: requested I/O range 0x3000-0x30ff: in range map[14]: type 1, range 64, base e8120000, size 17, enabled pcib2: requested memory range 0xe8120000-0xe813ffff: good pcib1: requested memory range 0xe8120000-0xe813ffff: good map[1c]: type 1, range 64, base e8100000, size 17, enabled pcib2: requested memory range 0xe8100000-0xe811ffff: good pcib1: requested memory range 0xe8100000-0xe811ffff: good pcib2: matched entry for 2.3.INTA pcib2: slot 3 INTA hardwired to IRQ 18 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem 0xe8120000-0xe813fff f,0xe8100000-0xe811ffff irq 18 at device 3.0 on pci2 mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xe8120000 ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.12.0 mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE ) mpt0: 0 Active Volumes (1 Max) mpt0: 0 Hidden Drive Members (6 Max) atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x 177,0x376,0x2000-0x200f at device 2.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xe8011000-0xe8011 fff irq 10 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8011000 ohci0: (New OHCI DeviceId=0x02231166) ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xe8012000-0xe8012 fff irq 10 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8012000 ohci1: (New OHCI DeviceId=0x02231166) ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xe8013000-0xe 8013fff irq 10 at device 3.2 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8013000 ehci0: (New EHCI DeviceId=0x02231166) ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pci0: <display, VGA> at device 4.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xfff00000-0xfffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xe8200000-0xe82fffff pcib4: prefetched decode 0xfff00000-0xfffff pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 found-> vendor=0x14e4, dev=0x166a, revid=0x03 bus=4, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base e8210000, size 16, enabled pcib4: requested memory range 0xe8210000-0xe821ffff: good map[18]: type 1, range 64, base e8200000, size 16, enabled pcib4: requested memory range 0xe8200000-0xe820ffff: good pcib4: matched entry for 4.4.INTA pcib4: slot 4 INTA hardwired to IRQ 26 found-> vendor=0x14e4, dev=0x166a, revid=0x03 bus=4, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base e8230000, size 16, enabled pcib4: requested memory range 0xe8230000-0xe823ffff: good map[18]: type 1, range 64, base e8220000, size 16, enabled pcib4: requested memory range 0xe8220000-0xe822ffff: good pcib4: matched entry for 4.4.INTB pcib4: slot 4 INTB hardwired to IRQ 27 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8210000-0xe821ffff,0xe82000 00-0xe820ffff irq 26 at device 4.0 on pci4 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8210000 miibus0: <MII bus> on bge0 brgphy0: <BCM5780 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX -FDX, auto bge0: bpf attached bge0: Ethernet address: 00:11:25:c4:1d:62 ioapic1: routing intpin 10 (PCI IRQ 26) to vector 53 bge0: [MPSAFE] bge1: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8230000-0xe823ffff,0xe82200 00-0xe822ffff irq 27 at device 4.1 on pci4 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8230000 miibus1: <MII bus> on bge1 brgphy1: <BCM5780 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX -FDX, auto bge1: bpf attached bge1: Ethernet address: 00:11:25:c4:1d:63 ioapic1: routing intpin 11 (PCI IRQ 27) to vector 54 bge1: [MPSAFE] pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xfff00000-0xfffff pcib5: prefetched decode 0xfff00000-0xfffff pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xfff00000-0xfffff pcib6: prefetched decode 0xfff00000-0xfffff pci6: <ACPI PCI bus> on pcib6 pci6: physical bus=6 pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xf000-0xfff pcib7: memory decode 0xfff00000-0xfffff pcib7: prefetched decode 0xfff00000-0xfffff pci7: <ACPI PCI bus> on pcib7 pci7: physical bus=7 pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0xfff00000-0xfffff pcib8: prefetched decode 0xfff00000-0xfffff pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.EXB4 - AE_NOT_F OUND pci8: <ACPI PCI bus> on pcib8 pci8: physical bus=8 pcib9: <ACPI Host-PCI bridge> on acpi0 pcib9: reading config registers from 0:25:0 pcib9: couldn't read bus number from cfg space pcib9: trying bus number 9 pcib9: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND pci9: <ACPI PCI bus> on pcib9 pci9: physical bus=9 acpi_button0: <Power Button> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices ipmi0: <IPMI System Interface> on isa0 ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ukbd0: ATEN UC-10KM V1.3.121, rev 1.10/1.00, addr 2, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 Device configuration finished. Reducing kern.maxvnodes 130867 -> 100000 lapic: Divisor 2, Frequency 99750465 hz Timecounter "TSC" frequency 2793019707 Hz quality -100 Timecounters tick every 1.000 msec ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to d eny, logging limited to 100 packets/entry by default lo0: bpf attached Waiting 3 seconds for SCSI devices to settle (xpt0:mpt0:0:-1:-1): reset bus ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ipmi0: IPMI device rev. 1, firmware rev. 1.81, version 1.5 ipmi0: Number of channels 3 ipmi0: Attached watchdog (probe1:mpt0:1:0:0): error 22 (probe1:mpt0:1:0:0): Unretryable Error (probe1:mpt0:1:1:0): error 22 (probe1:mpt0:1:1:0): Unretryable Error (probe1:mpt0:1:2:0): error 22 (probe1:mpt0:1:2:0): Unretryable Error (probe1:mpt0:1:3:0): error 22 (probe1:mpt0:1:3:0): Unretryable Error (probe1:mpt0:1:4:0): error 22 (probe1:mpt0:1:4:0): Unretryable Error (probe1:mpt0:1:5:0): error 22 (probe1:mpt0:1:5:0): Unretryable Error (probe0:mpt0:0:0:0): Retrying Command (probe0:mpt0:0:1:0): Retrying Command ses0 at mpt0 bus 0 target 8 lun 0 ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device ses0: Serial Number 1 ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device pass0 at mpt0 bus 0 target 0 lun 0 pass0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device pass0: Serial Number 3KT4A4RN00007640LBTT pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena bled pass1 at mpt0 bus 0 target 1 lun 0 pass1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device pass1: Serial Number 3KT4DDM700007640LDQE pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena bled pass2 at mpt0 bus 0 target 8 lun 0 pass2: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device pass2: Serial Number 1 pass2: 3.300MB/s transfers pt0 at mpt0 bus 0 target 8 lun 0 pt0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device pt0: Serial Number 1 pt0: 3.300MB/s transfers GEOM: new disk da0 GEOM: new disk da1 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 10 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic1: Assigning PCI IRQ 18 to local APIC 0 ioapic1: Assigning PCI IRQ 26 to local APIC 1 ioapic1: Assigning PCI IRQ 27 to local APIC 0 da0 at mpt0 bus 0 target 0 lun 0 da0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device da0: Serial Number 3KT4A4RN00007640LBTT da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl ed da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) da1 at mpt0 bus 0 target 1 lun 0 da1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device da1: Serial Number 3KT4DDM700007640LDQE da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl ed da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) Thanks for your time. Sincerely, Jason Chang
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070418093837.GA32573>