Date: Sat, 06 Nov 2004 18:40:41 +0100 From: Gabor MICSKO <gmicsko@szintezis.hu> To: Hans Lambermont <hans@lambermont.dyndns.org> Cc: freebsd-current@freebsd.org Subject: Re: 5.3-RC2: Fatal trap 19: non-maskable interrupt trap while in kernel mode Message-ID: <1099762840.11450.15.camel@alderaan.trey.hu> In-Reply-To: <20041106165147.GF79763@moya.lambermont.dyndns.org> References: <1099672914.7059.13.camel@alderaan.trey.hu> <20041106165147.GF79763@moya.lambermont.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-k4AvWI/ajO95OA71y0RX
Content-Type: text/plain; charset=ISO-8859-2
Content-Transfer-Encoding: quoted-printable
Quote from Matthew Dillon:
":Type '?' for a list of commands, 'help' for more detailed help.
:OK boot -Dh
:...
:fwohci0: OHCI version 1.10 (ROM=3D1)
:NMI ISA b1, EISA ff
:RAM parity error, likely hardware failure.
:
:Fatal trap 19: non-maskable interrupt trap while in kernel mode
:instruction pointer =3D 0x8:0xc01e3b6e
:...
:interrupt mask =3D net tty bio cam
:kernel: type 19 trap, code=3D0
:Stopped at fwohci_init+0xfa: movl %ecx,%edi
:db> tr
:fwohci_init(c9823000,c604af18) at fwohci_init+0xfa
Ok. Hmm. It fails in the same place. The code in question is
this:
...
/* Available Isochrounous DMA channel probe */
OWRITE(sc, OHCI_IT_MASK, 0xffffffff);
OWRITE(sc, OHCI_IR_MASK, 0xffffffff);
reg =3D OREAD(sc, OHCI_IT_MASK) & OREAD(sc, OHCI_IR_MASK);
OWRITE(sc, OHCI_IT_MASKCLR, 0xffffffff);
OWRITE(sc, OHCI_IR_MASKCLR, 0xffffffff);
for (i =3D 0; i < 0x20; i++)
if ((reg & (1 << i)) =3D=3D 0)
break;
...
It fails just after the OREAD's. My guess is that something in the
fwohci init code is blowing up the system hardware.
OpenBSD has similar but slightly different initialization code, but
the
differences shouldn't account for the failure.=20
The question is... when you booted up OpenBSD did it probe the
firewire
interface at all?
NetBSD also has similar code, but in NetBSD's case it also clears
the
command pointers after probing the transmit bitmap. But this occurs
after the crash point.
In anycase, my guess is that if you do not use firewire you can
compile
up a DragonFly kernel that does not probe the firewire controller
and
it will work. It is clearly NOT a ram problem... it's definitely a
firewire initialization issue that is causing the firewire hardware
to
blow up the system bus.
If you have the ability to compile up DragonFly kernels with some
patches
and want to try to get the firewire working I could put together a
patch
for you to try."
Please read this thread:
http://marc.theaimsgroup.com/?t=3D109967176800001&r=3D1&w=3D2
I have problem ONLY with FreeBSD 5.x and DragonFly BSD. IMHO this is a
FreeBSD specific thing. CPU not overclocked, memtest86 said my memory
module is OK. I tested this thing six different brand new memory module.
Maybe this is a firewire specific problem.=20
2004-11-06, szo keltez=E9ssel 17:51-kor Hans Lambermont ezt =EDrta:
> Gabor MICSKO wrote:
>=20
> > I've tried to install FreeBSD 5.3-RC2, FreeBSD 5.3-RC*, FreeBSD
> > 5.2.1-RELEASE, FreeBSD 5.2-RELEASE on my amd64 based laptop, but at
> > boot kernel is paniced.=20
>=20
> Just to be clear about the obvious:
>=20
> > NMI ISA a1, EISA ff
> > RAM parity error, likely hardware failure.
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>=20
> I'm not surprised you get a kernel panic with this system. Your RAM has
> faults. Unless you're absolutely sure this is not the case and the NMI
> complaint is bogus (I see you've tested with various other OSes, and
> even then it might be true) I suggest swapping RAM and trying again.
>=20
> regards,
> Hans Lambermont
--=20
Micsk=F3 G=E1bor
HP Accredited Platform Specialist, System Engineer (APS, ASE)
Szint=E9zis Computer Rendszerh=E1z Rt. =20
H-9021 Gy=F5r, Tihanyi =C1rp=E1d =FAt 2.
Tel: +36-96-502-216
Fax: +36-96-318-658
E-mail: gmicsko@szintezis.hu
Web: http://www.hup.hu/
GPG Key fingerprint: 6FA1 D8BF 3C73 0570 ED5D 82AC A3BE 4E6A CF95 5F50
--=-k4AvWI/ajO95OA71y0RX
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: Ez az =?ISO-8859-1?Q?=FCzenetr=E9sz?=
=?ISO-8859-1?Q?_digit=E1lis?= =?ISO-8859-1?Q?_al=E1=EDr=E1ssal?= van
=?ISO-8859-1?Q?ell=E1tva?=
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQBBjQyYo75Oas+VX1ARAuDhAJoCtliLY1ccMoloUB2uxx1N1FHq7ACfeckL
TiUENgUe06Tx9o0mfEqeKvg=
=CSdK
-----END PGP SIGNATURE-----
--=-k4AvWI/ajO95OA71y0RX--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1099762840.11450.15.camel>