Date: Tue, 11 May 2004 13:39:46 -0700 (PDT) From: "Justin T. Gibbs" <gibbs@FreeBSD.org> To: src-committers@FreeBSD.org, cvs-src@FreeBSD.org, cvs-all@FreeBSD.org Subject: cvs commit: src/sys/dev/aic7xxx aic7xxx.c Message-ID: <200405112039.i4BKdk9W047796@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
gibbs 2004/05/11 13:39:46 PDT
FreeBSD src repository
Modified files:
sys/dev/aic7xxx aic7xxx.c
Log:
o When restarting the sequencer, clear any pending
sequencer interrupt codes. These codes are only
relevant to the code that was last being executed
and that context is cleared when we reset the
program counter. This addresses a race condition
between a sequencer interrupt and any SCSI event
that causes us to restart the sequencer.
o When running the untagged-Q, we must start the
timer for any transaction we queue.
o Give the firmware half a millisecond between
pauses to flush work out. This should give us
around half a second of total delay before flagging
an issue with pausing and flushing controller work.
Only attempt to clear critical sections if there
are no pending interrupts in the pause and flush
loop. If the sequencer has issued an INTSTAT, we
may not be able to step out of the critical section.
o Cancel pending transactions on devices that
respond with a selection timeout. This decreases
the duration of timeout recovery when a device
disappears.
Don't bother forcing renegotiation on a selection
timeout now that we use the device reset handler
to abort any pending commands on the target.
The device reset handler already takes us down
to async narrow and forces a renegotiation.
o In the device reset handlers, only send a
BDR sent async event if the status is not
CAM_SEL_TIMEOUT. This avoids sending this
event in the selection timeout case.
o Modify the Core timeout handler to verify that another
command has the potential to timeout before passing off
a command timeout as due to some other command.
Revision Changes Path
1.100 +88 -26 src/sys/dev/aic7xxx/aic7xxx.c
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200405112039.i4BKdk9W047796>