Date: Fri, 25 Apr 2003 00:26:41 -0700 From: Bryan Vyhmeister <bsd@hub3.net> To: ydg <ydg@cox.net>, freebsd-questions@freebsd.org Subject: Re: Wireless card for freebsd Message-ID: <42AA385E-76EF-11D7-A769-000393D5E5DA@hub3.net> In-Reply-To: <20030425001625.7b38e4d2.ydg@cox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday, April 25, 2003, at 12:16 AM, ydg wrote: > I currently have FreeBSD 4.8 running on my laptop. I would like to try > wireless access. Someone has suggested the Orinoco cards. However > reading thru the archives looks like it might only support adhoc mode? > I would like a card that can do both adhoc and bss. Orinoco cards work fine. They support both adhoc and bss mode. I have been using them for years now. > The handbook says a card using a Prism chipset will work as an access > point. > Any recommendations on a good card to go with? I started with Orinoco cards but I am now using mostly EnGenius cards. They are 200 mW instead of the 30 mW of the Orinoco cards. They have excellent range and work very well as a client card or as an access point. I am running one as an access point in my house right now using a PCI adapter and FreeBSD 5.0. The EnGenius cards are available from: http://www.netgate.com/ They are slightly more expensive than Orinoco cards these days but they are worth it in my opinion! > Sorry if this is a repeated question. I did some searching in the > archives and google, and didnt find anything too solid, figured id go > to a more direct source :) There was a message about this on April 21 but that wouldn't have made it into Google yet most likely. It is as follows: > From: Bryan Vyhmeister <bsd@hub3.net> > Date: Mon Apr 21, 2003 10:09:05 PM US/Pacific > To: "Remington L." <madriax@garlic.com>, freebsd-questions@freebsd.org > Subject: Re: Compatible wireless nic > > On Monday, April 21, 2003, at 09:51 PM, Remington L. wrote: > >> I will be implementing a wireless LAN within the next few weeks. I >> will >> have FreeBSD 5.0 as the server. It will be acting as the default >> gateway >> to the internet and as a WAP. From your guys experiences what are some >> good PCI 802.11b wireless cards? (full BSD compatible is a must of >> course) > > I am presently running a Senao/EnGenius 200mW 802.11b wireless card > inside a PCI adapter in a VIA C3 800 MHz mini-ITX system. It runs > FreeBSD 5.0 and is my access point at home. It runs very well. I > highly recommend the Senao/EnGenius cards. The cards work great in > FreeBSD 4.7, 4.8, and 5.0. I got my cards from: > > http://www.netgate.com/ > > As a side note, I could not get FreeBSD 4.7 or 4.8 to recognize the > PCI adapter properly but 5.0 works like a charm. Hope that helps. Hope that gives you some ideas. Bryan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42AA385E-76EF-11D7-A769-000393D5E5DA>