Date: Thu, 25 Jan 2001 19:23:30 -0700 From: "Simon \"Hagar\" Maycock" <hagar@inficad.com> To: <freebsd-questions@FreeBSD.org> Subject: UsePPP configuration. Message-ID: <000301c0873e$fccb5500$0100a8c0@george>
next in thread | raw e-mail | index | archive | help
Please help,
Having destroyed my RH box beyond all repair, I decided to have a look at
FreeBSD. I am informed it is closer to UNIX, an OS I am keen to get up to
speed in. The install went sweet and I have basic ethernet support. Now I
need to configure dial up PPP support to Arizona State University. I have
been messing around ALL DAY trying to get it working. To be honest I do not
know what I am doing and what settings I should have in my config files. I
have tried everything I know but still cannot get a connection. All I get
is:
charlie# ppp asu
Working in interactive mode
Using interface: tun0
ppp ON charlie> dial
ppp ON charlie> Warning: Chat script failed
Warning: Chat script failed
ppp ON charlie>
If I use term and manually dial I authenticate fine and if I use the kppp
also. So what is going wrong?????????? I have tried so many different
entries in set login "...." I am all out of ideas.
Please help. Thanks,
Simon Maycock
System files:>>>>>>>>>>>>>>>
charlie# uname -a
FreeBSD charlie.mrhagar.com 4.1-RELEASE FreeBSD 4.1-RELEASE #0: Fri Jul 28
14:30:31 GMT 2000 jkh
@ref4.freebsd.org:/usr/src/sys/compile/GENERIC i386
charlie# cat ppp.conf
################################################################
# PPP Configuration File ('/etc/ppp/ppp.conf')
# Default settings; These are always executed always when PPP
# is invoked and apply to all system configurations.
################################################################
default:
set device /dev/cuaa0
set speed 57600
disable pred1
deny pred1
disable lqr
deny lqr
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0M0 OK-AT-OK
\\dATDT\\T TIMEOUT 40 CONN
ECT"
set redial 3 10
#
#
################################################################
#
# For interactive mode use this configuration:
#
# Invoke with `ppp -alias interactive`
#
################################################################
asu:
set login "TIMEOUT 25 Username:-\\r-Username: mrhagar Password: ZZZZZZXXXX"
set phone 7270030
set timeout 300
set openmode active
accept pap
accept chap
set authname mrhagar
set authkey ZZZZZXXXXX
set ifaddr 0 0
add default HISADDR
# set ifaddr 127.1.1.1/0 127.2.2.2/0 255.255.255.0
# add 0 0 127.2.2.2
################################################################
# End of /etc/ppp/ppp.conf
charlie# cat ppp.linkup
#########################################################################=
#
# PPP Link Up File ('/etc/ppp/ppp.linkup')
#
# This file is checked after PPP establishes a network connection.
#
# This file is searched in the following order.
#
# 1) First, the IP address assigned to us is searched and
# the associated command(s) are executed.
#
# 2) If the IP Address is not found, then the label name specified at
# PPP startup time is searched and the associated command(s)
# are executed.
#
# 3) If neither of the above are found then commands under the label
# 'MYADDR:' are executed.
#
#########################################################################=
#
# This section is used for the "demand" configuration in
# /etc/ppp/ppp.conf:
asu:
delete ALL
add 0 0 HISADDR
#
# All other configurations in /etc/ppp/ppp.conf use this:
#
MYADDR:
add 0 0 HISADDR
########################################################################
# End of /etc/ppp/ppp.linkup
charlie# cat /var/log/ppp.log
Jan 25 18:27:38 charlie ppp[342]: Phase: bundle: Establish
Jan 25 18:27:38 charlie ppp[342]: Phase: deflink: closed -> opening
Jan 25 18:27:38 charlie ppp[342]: Phase: deflink: Connected!
Jan 25 18:27:38 charlie ppp[342]: Phase: deflink: opening -> dial
Jan 25 18:28:20 charlie ppp[342]: Warning: Chat script failed
Jan 25 18:28:20 charlie ppp[342]: Phase: deflink: dial -> hangup
Jan 25 18:28:20 charlie ppp[342]: Phase: deflink: Disconnected!
Jan 25 18:28:20 charlie ppp[342]: Phase: deflink: Connect time: 42 secs: 0
octets in, 0 octets out
Jan 25 18:28:20 charlie ppp[342]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:28:20
2001
Jan 25 18:28:20 charlie ppp[342]: Phase: deflink: hangup -> opening
Jan 25 18:28:20 charlie ppp[342]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:28:23 charlie ppp[342]: Phase: deflink: Connected!
Jan 25 18:28:23 charlie ppp[342]: Phase: deflink: opening -> dial
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: Disconnected!
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: dial -> logout
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: logout -> hangup
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: Disconnected!
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: Connect time: 28 secs: 0
octets in, 0 octets out
Jan 25 18:28:51 charlie ppp[342]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:28:51
2001
Jan 25 18:28:51 charlie ppp[342]: Phase: deflink: hangup -> closed
Jan 25 18:28:51 charlie ppp[342]: Phase: bundle: Dead
Jan 25 18:28:51 charlie ppp[342]: Phase: PPP Terminated (normal).
Jan 25 18:51:54 charlie ppp[238]: Phase: Using interface: tun0
Jan 25 18:51:54 charlie ppp[238]: Phase: deflink: Created in closed state
Jan 25 18:51:55 charlie ppp[238]: Phase: PPP Started (interactive mode).
Jan 25 18:52:00 charlie ppp[238]: Phase: bundle: Establish
Jan 25 18:52:00 charlie ppp[238]: Phase: deflink: closed -> opening
Jan 25 18:52:00 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:52:00 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:52:43 charlie ppp[238]: Warning: Chat script failed
Jan 25 18:52:43 charlie ppp[238]: Phase: deflink: dial -> hangup
Jan 25 18:52:43 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:52:43 charlie ppp[238]: Phase: deflink: Connect time: 43 secs: 0
octets in, 0 octets out
Jan 25 18:52:43 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:52:43
2001
Jan 25 18:52:43 charlie ppp[238]: Phase: deflink: hangup -> opening
Jan 25 18:52:43 charlie ppp[238]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:52:46 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:52:46 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:53:29 charlie ppp[238]: Warning: Chat script failed
Jan 25 18:53:29 charlie ppp[238]: Phase: deflink: dial -> hangup
Jan 25 18:53:29 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:53:29 charlie ppp[238]: Phase: deflink: Connect time: 43 secs: 0
octets in, 0 octets out
Jan 25 18:53:29 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:53:29
2001
Jan 25 18:53:29 charlie ppp[238]: Phase: deflink: hangup -> opening
Jan 25 18:53:29 charlie ppp[238]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:53:32 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:53:32 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:54:14 charlie ppp[238]: Warning: Chat script failed
Jan 25 18:54:14 charlie ppp[238]: Phase: deflink: dial -> hangup
Jan 25 18:54:14 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:54:14 charlie ppp[238]: Phase: deflink: Connect time: 42 secs: 0
octets in, 0 octets out
Jan 25 18:54:14 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:54:14
2001
Jan 25 18:54:14 charlie ppp[238]: Phase: deflink: hangup -> opening
Jan 25 18:54:14 charlie ppp[238]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:54:17 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:54:17 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:55:00 charlie ppp[238]: Warning: Chat script failed
Jan 25 18:55:00 charlie ppp[238]: Phase: deflink: dial -> hangup
Jan 25 18:55:00 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:55:00 charlie ppp[238]: Phase: deflink: Connect time: 43 secs: 0
octets in, 0 octets out
Jan 25 18:55:00 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:55:00
2001
Jan 25 18:55:00 charlie ppp[238]: Phase: deflink: hangup -> opening
Jan 25 18:55:00 charlie ppp[238]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:55:03 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:55:03 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:55:45 charlie ppp[238]: Warning: Chat script failed
Jan 25 18:55:45 charlie ppp[238]: Phase: deflink: dial -> hangup
Jan 25 18:55:45 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:55:45 charlie ppp[238]: Phase: deflink: Connect time: 42 secs: 0
octets in, 0 octets out
Jan 25 18:55:45 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:55:45
2001
Jan 25 18:55:45 charlie ppp[238]: Phase: deflink: hangup -> opening
Jan 25 18:55:45 charlie ppp[238]: Phase: deflink: Enter pause (3) for
redialing.
Jan 25 18:55:48 charlie ppp[238]: Phase: deflink: Connected!
Jan 25 18:55:48 charlie ppp[238]: Phase: deflink: opening -> dial
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: dial -> logout
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: logout -> hangup
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: Disconnected!
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: Connect time: 1 secs: 0
octets in, 0 octets out
Jan 25 18:55:49 charlie ppp[238]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Thu Jan 25 18:55:49
2001
Jan 25 18:55:49 charlie ppp[238]: Phase: deflink: hangup -> closed
Jan 25 18:55:49 charlie ppp[238]: Phase: bundle: Dead
Jan 25 18:55:49 charlie ppp[238]: Phase: PPP Terminated (normal).
charlie# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Netif Expire
127.0.0.1 127.0.0.1 UH 1 26 lo0
192.168 link#1 UC 0 0 fxp0 =>
192.168.0.1 0:d0:b7:c0:f5:4b UHLW 2 677 fxp0 1196
192.168.0.201 0:a0:c9:42:ee:9a UHLW 0 16 lo0
Internet6:
Destination Gateway Flags
Netif Expire
::1 ::1 UH
lo0
fe80::%fxp0/64 link#1 UC
fxp0
fe80::%lo0/64 fe80::1%lo0 Uc
lo0
fe80::%tun0/64 link#11 UC
tun0
fe80::2a0:c9ff:fe42:ee9a%tun0 ::1 UH
lo0
ff01::/32 ::1 U
lo0
ff02::%fxp0/32 link#1 UC
fxp0
ff02::%lo0/32 fe80::1%lo0 UC
lo0
ff02::%tun0/32 link#11 UC
tun0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c0873e$fccb5500$0100a8c0>