Date: Sun, 21 Aug 2016 18:37:22 +0000 (UTC) From: Hans Petter Selasky <hselasky@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r304571 - head/sys/dev/usb/input Message-ID: <201608211837.u7LIbM1t020765@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: hselasky Date: Sun Aug 21 18:37:21 2016 New Revision: 304571 URL: https://svnweb.freebsd.org/changeset/base/304571 Log: Make the UKBD USB transfers double buffered and set them up one by one, so they are memory independent which allows for handling panics triggered by the keyboard driver itself, typically via CTRL+ALT+ESC sequences. Or if the USB keyboard driver was processing a key at the moment of panic. Allow UKBD to be attached while keyboard polling is active. Tested by: Bruce Evans <bde@freebsd.org> MFC after: 1 week Modified: head/sys/dev/usb/input/ukbd.c Modified: head/sys/dev/usb/input/ukbd.c ============================================================================== --- head/sys/dev/usb/input/ukbd.c Sun Aug 21 18:12:49 2016 (r304570) +++ head/sys/dev/usb/input/ukbd.c Sun Aug 21 18:37:21 2016 (r304571) @@ -108,7 +108,7 @@ SYSCTL_INT(_hw_usb_ukbd, OID_AUTO, pollr #define UKBD_NMOD 8 /* units */ #define UKBD_NKEYCODE 6 /* units */ #define UKBD_IN_BUF_SIZE (2*(UKBD_NMOD + (2*UKBD_NKEYCODE))) /* bytes */ -#define UKBD_IN_BUF_FULL (UKBD_IN_BUF_SIZE / 2) /* bytes */ +#define UKBD_IN_BUF_FULL ((UKBD_IN_BUF_SIZE / 2) - 1) /* bytes */ #define UKBD_NFKEY (sizeof(fkey_tab)/sizeof(fkey_tab[0])) /* units */ #define UKBD_BUFFER_SIZE 64 /* bytes */ @@ -129,7 +129,8 @@ struct ukbd_data { }; enum { - UKBD_INTR_DT, + UKBD_INTR_DT_0, + UKBD_INTR_DT_1, UKBD_CTRL_LED, UKBD_N_TRANSFER, }; @@ -478,7 +479,8 @@ ukbd_get_key(struct ukbd_softc *sc, uint if (sc->sc_inputs == 0 && (sc->sc_flags & UKBD_FLAG_GONE) == 0) { /* start transfer, if not already started */ - usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT]); + usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_0]); + usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_1]); } if (sc->sc_flags & UKBD_FLAG_POLLING) @@ -954,7 +956,16 @@ ukbd_set_leds_callback(struct usb_xfer * static const struct usb_config ukbd_config[UKBD_N_TRANSFER] = { - [UKBD_INTR_DT] = { + [UKBD_INTR_DT_0] = { + .type = UE_INTERRUPT, + .endpoint = UE_ADDR_ANY, + .direction = UE_DIR_IN, + .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, + .bufsize = 0, /* use wMaxPacketSize */ + .callback = &ukbd_intr_callback, + }, + + [UKBD_INTR_DT_1] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, @@ -1201,9 +1212,26 @@ ukbd_attach(device_t dev) usb_callout_init_mtx(&sc->sc_callout, &Giant, 0); +#ifdef UKBD_NO_POLLING err = usbd_transfer_setup(uaa->device, &uaa->info.bIfaceIndex, sc->sc_xfer, ukbd_config, UKBD_N_TRANSFER, sc, &Giant); +#else + /* + * Setup the UKBD USB transfers one by one, so they are memory + * independent which allows for handling panics triggered by + * the keyboard driver itself, typically via CTRL+ALT+ESC + * sequences. Or if the USB keyboard driver was processing a + * key at the moment of panic. + */ + for (n = 0; n != UKBD_N_TRANSFER; n++) { + err = usbd_transfer_setup(uaa->device, + &uaa->info.bIfaceIndex, sc->sc_xfer + n, ukbd_config + n, + 1, sc, &Giant); + if (err) + break; + } +#endif if (err) { DPRINTF("error=%s\n", usbd_errstr(err)); @@ -1295,11 +1323,13 @@ ukbd_attach(device_t dev) rate = 1000 / rate; /* set new polling interval in ms */ - usbd_xfer_set_interval(sc->sc_xfer[UKBD_INTR_DT], rate); + usbd_xfer_set_interval(sc->sc_xfer[UKBD_INTR_DT_0], rate); + usbd_xfer_set_interval(sc->sc_xfer[UKBD_INTR_DT_1], rate); } #endif /* start the keyboard */ - usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT]); + usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_0]); + usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_1]); return (0); /* success */ @@ -1325,7 +1355,8 @@ ukbd_detach(device_t dev) /* kill any stuck keys */ if (sc->sc_flags & UKBD_FLAG_ATTACHED) { /* stop receiving events from the USB keyboard */ - usbd_transfer_stop(sc->sc_xfer[UKBD_INTR_DT]); + usbd_transfer_stop(sc->sc_xfer[UKBD_INTR_DT_0]); + usbd_transfer_stop(sc->sc_xfer[UKBD_INTR_DT_1]); /* release all leftover keys, if any */ memset(&sc->sc_ndata, 0, sizeof(sc->sc_ndata)); @@ -1979,7 +2010,7 @@ ukbd_poll(keyboard_t *kbd, int on) */ if (on) sc->sc_polling++; - else + else if (sc->sc_polling > 0) sc->sc_polling--; if (sc->sc_polling != 0) {
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201608211837.u7LIbM1t020765>