Date: Thu, 29 Jan 2026 00:00:01 +0000 From: Cy Schubert <cy@FreeBSD.org> To: ports-committers@FreeBSD.org, dev-commits-ports-all@FreeBSD.org, dev-commits-ports-main@FreeBSD.org Subject: git: 56666f155b5f - main - net/hostapd-devel: Update to the latest GH commit Message-ID: <697aa301.bae6.7f327424@gitrepo.freebsd.org>
index | next in thread | raw e-mail
The branch main has been updated by cy: URL: https://cgit.FreeBSD.org/ports/commit/?id=56666f155b5f069d5e03a2e156b57fd67002610a commit 56666f155b5f069d5e03a2e156b57fd67002610a Author: Cy Schubert <cy@FreeBSD.org> AuthorDate: 2026-01-28 18:04:54 +0000 Commit: Cy Schubert <cy@FreeBSD.org> CommitDate: 2026-01-28 23:59:45 +0000 net/hostapd-devel: Update to the latest GH commit Update to the latest w1.fi commit, proxied through my GH account --- net/hostapd-devel/Makefile | 13 +- net/hostapd-devel/distinfo | 6 +- net/hostapd-devel/files/config | 316 ----------------------------------------- 3 files changed, 13 insertions(+), 322 deletions(-) diff --git a/net/hostapd-devel/Makefile b/net/hostapd-devel/Makefile index 1b3f35d15d80..f9fc1100525e 100644 --- a/net/hostapd-devel/Makefile +++ b/net/hostapd-devel/Makefile @@ -10,8 +10,8 @@ WWW= https://w1.fi/hostapd/ USE_GITHUB= yes GH_ACCOUNT= cschuber GH_PROJECT= hostap -GH_TAGNAME= e17107912c -COMMIT_DATE= 2026.01.09 +GH_TAGNAME= 46e71c4104 +COMMIT_DATE= 2026.01.26 LICENSE= BSD3CLAUSE @@ -19,8 +19,10 @@ USES= cpe gmake ssl CPE_VENDOR= w1.fi BUILD_WRKSRC= ${WRKSRC}/hostapd CFLAGS+= -Wno-incompatible-function-pointer-types +CFLAGS+= -Wno-int-conversion CFLAGS+= -I${OPENSSLINC} LDFLAGS+= -L${OPENSSLLIB} +MAKE_JOBS_UNSAFE= yes PLIST_FILES= sbin/hostapd sbin/hostapd_cli share/man/man1/hostapd_cli.1.gz \ share/man/man8/hostapd.8.gz @@ -31,8 +33,13 @@ USE_RC_SUBR= hostapd post-patch: @${REINPLACE_CMD} -e 's|@$$(E) " CC " $$<|@$$(E) " $$(CC) " $$<|' \ ${BUILD_WRKSRC}/Makefile - @${SED} -e 's|@PREFIX@|${PREFIX}|g' ${FILESDIR}/config \ + @${SED} -e 's|/usr/local|${PREFIX}|g;s|^CONFIG_DRIVER_NL80211|#CONFIG_DRIVER_NL80211|' ${BUILD_WRKSRC}/defconfig \ >> ${WRKSRC}/hostapd/.config + @${ECHO_CMD} 'CONFIG_L2_FREEBSD=y' >> ${WRKSRC}/hostapd/.config + @${ECHO_CMD} 'CONFIG_DNET_PCAP=y' >> ${WRKSRC}/hostapd/.config + @${ECHO_CMD} 'CONFIG_IEEE80211BE=y' >> ${WRKSRC}/hostapd/.config + @${ECHO_CMD} 'CONFIG_IEEE80211AC=y' >> ${WRKSRC}/hostapd/.config + @${ECHO_CMD} 'NEED_AP_MLME=y' >> ${WRKSRC}/hostapd/.config do-install: ${INSTALL_PROGRAM} ${WRKSRC}/hostapd/hostapd ${STAGEDIR}${PREFIX}/sbin diff --git a/net/hostapd-devel/distinfo b/net/hostapd-devel/distinfo index 484cd922b0df..6a9ee8916abc 100644 --- a/net/hostapd-devel/distinfo +++ b/net/hostapd-devel/distinfo @@ -1,3 +1,3 @@ -TIMESTAMP = 1768319827 -SHA256 (cschuber-hostap-2026.01.09-e17107912c_GH0.tar.gz) = c6126cfc7dfee7923c06fef580fe433d6397712646276b54f4e9c1426f4ae423 -SIZE (cschuber-hostap-2026.01.09-e17107912c_GH0.tar.gz) = 5388143 +TIMESTAMP = 1769618135 +SHA256 (cschuber-hostap-2026.01.26-46e71c4104_GH0.tar.gz) = 7217a5ee9c5e22cab0c1c5356a05b374fbed3b13bece2dea56b7896dad749cf4 +SIZE (cschuber-hostap-2026.01.26-46e71c4104_GH0.tar.gz) = 5394526 diff --git a/net/hostapd-devel/files/config b/net/hostapd-devel/files/config deleted file mode 100644 index de05f3384a1a..000000000000 --- a/net/hostapd-devel/files/config +++ /dev/null @@ -1,316 +0,0 @@ -# FreeBSD hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -#CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -#CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -#CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for drivers using the nl80211 kernel interface -#CONFIG_DRIVER_NL80211=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -#CONFIG_LIBNL32=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -CONFIG_DRIVER_BSD=y -CFLAGS += -I@PREFIX@/include -LIBS += -L@PREFIX@/lib -LIBS_p += -L@PREFIX@/lib -LIBS_c += -L@PREFIX@/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -#CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -#CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -#CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd for the integrated EAP server (secure authentication with a password) -#CONFIG_EAP_PWD=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# EAP-EKE for the integrated EAP server -#CONFIG_EAP_EKE=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -#CONFIG_IEEE80211N=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# IEEE 802.11ac (Very High Throughput) support -#CONFIG_IEEE80211AC=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Add support for writing debug log to a file: -f /tmp/hostapd.log -# Disabled by default. -#CONFIG_DEBUG_FILE=y - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Remove support for RADIUS accounting -#CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -#CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -# Enable support for fully dynamic VLANs. This enables hostapd to -# automatically create bridge and VLAN interfaces if necessary. -#CONFIG_FULL_DYNAMIC_VLAN=y - -# Use netlink-based kernel API for VLAN operations instead of ioctl() -# Note: This requires libnl 3.1 or newer. -#CONFIG_VLAN_NETLINK=y - -# Remove support for dumping internal state through control interface commands -# This can be used to reduce binary size at the cost of disabling a debugging -# option. -#CONFIG_NO_DUMP_STATE=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -# hostapd depends on strong random number generation being available from the -# operating system. os_get_random() function is used to fetch random data when -# needed, e.g., for key generation. On Linux and BSD systems, this works by -# reading /dev/urandom. It should be noted that the OS entropy pool needs to be -# properly initialized before hostapd is started. This is important especially -# on embedded devices that do not have a hardware random number generator and -# may by default start up with minimal entropy available for random number -# generation. -# -# As a safety net, hostapd is by default trying to internally collect -# additional entropy for generating random data to mix in with the data -# fetched from the OS. This by itself is not considered to be very strong, but -# it may help in cases where the system pool is not initialized properly. -# However, it is very strongly recommended that the system pool is initialized -# with enough entropy either by using hardware assisted random number -# generator or by storing state over device reboots. -# -# hostapd can be configured to maintain its own entropy store over restarts to -# enhance random number generation. This is not perfect, but it is much more -# secure than using the same sequence of random numbers after every reboot. -# This can be enabled with -e<entropy file> command line option. The specified -# file needs to be readable and writable by hostapd. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal hostapd random pool can be disabled. -# This will save some in binary size and CPU use. However, this should only be -# considered for builds that are known to be used on devices that meet the -# requirements described above. -#CONFIG_NO_RANDOM_POOL=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. -#CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. -#CONFIG_TLSV12=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks. -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file -#CONFIG_SQLITE=y - -# Testing options -# This can be used to enable some testing options (see also the example -# configuration file) that are really useful only for testing clients that -# connect to this hostapd. These options allow, for example, to drop a -# certain percentage of probe requests or auth/(re)assoc frames. -# -#CONFIG_TESTING_OPTIONS=y - -# Automatic Channel Selection -# This will allow hostapd to pick the channel automatically when channel is set -# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in -# similar way. -# -# Automatic selection is currently only done through initialization, later on -# we hope to do background checks to keep us moving to more ideal channels as -# time goes by. ACS is currently only supported through the nl80211 driver and -# your driver must have survey dump capability that is filled by the driver -# during scanning. -# -# You can customize the ACS survey algorithm with the hostapd.conf variable -# acs_num_scans. -# -# Supported ACS drivers: -# * ath9k -# * ath5k -# * ath10k -# -# For more details refer to: -# http://wireless.kernel.org/en/users/Documentation/acs -# -#CONFIG_ACS=yhome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?697aa301.bae6.7f327424>