Date: Thu, 15 Feb 2007 10:56:51 +0100 From: "Nikolas Hagelstein" <hagelstein@shr.cc> To: <freebsd-hardware@freebsd.org> Subject: 3ware 9650SE performance issues Message-ID: <05F5882A865FBB4EB684C22EA83529094A4B11@mailserver.open.local>
next in thread | raw e-mail | index | archive | help
Hi,
I am running the 3ware 9650SE(8LPML) in RAID5 with 7x700GB drives
attached to it (~4.2 TB at raid5).
Since i need one huge "storage area" the filesystem resides at the raw
device (i.e. /dev/da0).
For some reasons the raids write performance is very slow (2 to 3MB/s):
33554432 bytes transferred in 14.679426 secs (2285814 bytes/sec)=20
The raid is initialized and all disks are ok (double checked that)
I tried several different filesystem and raidcontroller options (e.g.
blocksize,frag, Slicesice etc.) without any success.
Another strange thing: for testing prupose i set the controllerto raid0
mode which resulted in 55MB/s. Though raid0 is faster than raid5 by
principle that anyhow seems really strange to me.
I am not sure if this is a pure hardware related issue since "raw
access" performes quite good:
diskinfo -t /dev/da0
/dev/da0
512 # sectorsize
4499932446720 # mediasize in bytes (4.1T)
8788930560 # mediasize in sectors
547085 # Cylinders according to firmware.
255 # Heads according to firmware.
63 # Sectors according to firmware.
....
Transfer rates:
outside: 102400 kbytes in 1.052566 sec =3D 97286
kbytes/sec
middle: 102400 kbytes in 1.065493 sec =3D 96106
kbytes/sec
inside: 102400 kbytes in 1.067073 sec =3D 95963
kbytes/sec
I attached any needed information:
FreeBSD 6.2-RELEASE
Dmesg snippet(a full version can be find here:http://phpfi.com/203614):
---
3ware device driver for 9000 series storage controllers, version:
3.60.03.005
twa0: <3ware 9000 series Storage Controller> port 0xe800-0xe8ff mem
0xde000000-0xdfffffff,0xbffff000-0xbfffffff irq 16 at device 0.0 on pci4
twa0: [GIANT-LOCKED]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-8LPML, 8
ports, Firmware FE9X 3.06.00.005, BIOS BE9X 3.06.00.002
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9650SE-8LP DISK 3.06> Fixed Direct Access SCSI-5 device
da0: 100.000MB/s transfers
da0: 4291470MB (8788930560 512 byte sectors: 255H 63S/T 547085C)
---
---
tunefs -p /dev/da0
tunefs: ACLs: (-a) disabled
tunefs: MAC multilabel: (-l) disabled
tunefs: soft updates: (-n) disabled
tunefs: gjournal: (-J) disabled
tunefs: maximum blocks per file in a cylinder group: (-e) 2048
tunefs: average file size: (-f) 16384
tunefs: average number of files in a directory: (-s) 64
tunefs: minimum percentage of free space: (-m) 8%
tunefs: optimization preference: (-o) time
tunefs: volume label: (-L)
---
---
Ctl Model Ports Drives Units NotOpt RRate VRate BBU
------------------------------------------------------------------------
c0 9650SE-8LPML 8 7 1 0 1 1 -
//backup> /c0 show
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache
AVrfy
------------------------------------------------------------------------
------
u0 RAID-5 OK - - 256K 4190.89 OFF
OFF
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 698.63 GB 1465149168 3QD0Q4N6
p1 OK u0 698.63 GB 1465149168 3QD0RYEP
p2 OK u0 698.63 GB 1465149168 3QD0HEZM
p3 OK u0 698.63 GB 1465149168 3QD0PZK7
p4 OK u0 698.63 GB 1465149168 3QD07Q7G
p5 OK u0 698.63 GB 1465149168 3QD0PX0J
p6 OK u0 698.63 GB 1465149168 3QD0M5VQ
p7 NOT-PRESENT - - - -
---
Cheers,
Nikolas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?05F5882A865FBB4EB684C22EA83529094A4B11>