Date: Thu, 3 Jan 2002 13:43:06 -0500 From: Joshua Coombs <jcoombs@gwi.net> To: Josef Karthauser <joe@tao.org.uk> Cc: freebsd-stable@freebsd.org Subject: Re: Linksys USB100TX Message-ID: <20020103134306.A23765@dargo.gwi.net> In-Reply-To: <20020103183914.A15254@genius.tao.org.uk>; from joe@tao.org.uk on Thu, Jan 03, 2002 at 06:39:14PM %2B0000 References: <20020103132559.A12981@dargo.gwi.net> <20020103183914.A15254@genius.tao.org.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jan 03, 2002 at 06:39:14PM +0000, Josef Karthauser wrote:
> On Thu, Jan 03, 2002 at 01:25:59PM -0500, Joshua Coombs wrote:
> > I have a Linksys USB100TX that I'm working on getting fired up with
> > FreeBSD. NetBSD sees the device as an aue item and runs with it clean,
> > Free sees it as a ugen. I did some digging and found references in early
> > 2001 hinting that this particular model was supported by Free, so I'm
> > guessing that mine has a new rev number or something similar throwing
> > FreeBSD's identification of it off.
> >
> > Controller /dev/usb0:
> > addr 1: self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 0x0100
> > port 1 powered
> > port 2 addr 2: power 156 mA, config 1, LINKSYS USB Adapter(0x400b), LINKSYS Inc.(0x066b), rev 0x0101
> >
> > Is this something that I can twiddle my local copy of /usr/src to make
> > function, or is there going to be more work involved? I'm willing to
> > put the time in to get this going and test it, I just need some guidance
> > in doing so.
>
> Try this. Apply the following patch, and then do:
>
> # cd /usr/src/sys/dev/usb
> # make -f Makefile.usbdevs
>
> Then rebuild your kernel and see if it works.
> What's the exact model number of this device?
>
> Joe
>
>
> Index: usbdevs
> ===================================================================
> RCS file: /home/ncvs/src/sys/dev/usb/usbdevs,v
> retrieving revision 1.71
> diff -u -r1.71 usbdevs
> --- usbdevs 12 Dec 2001 15:58:22 -0000 1.71
> +++ usbdevs 3 Jan 2002 18:36:55 -0000
> @@ -685,6 +685,7 @@
> product LINKSYS USB100TX 0x2203 USB100TX Ethernet
> product LINKSYS USB100H1 0x2204 USB100H1 Ethernet/HPNA
> product LINKSYS USB10TA 0x2206 USB10TA Ethernet
> +product LINKSYS UNKNOWN 0x400b Unknown Ethernet
>
> /* Logitech products */
> product LOGITECH M2452 0x0203 M2452 keyboard
> Index: if_aue.c
> ===================================================================
> RCS file: /home/ncvs/src/sys/dev/usb/if_aue.c,v
> retrieving revision 1.44
> diff -u -r1.44 if_aue.c
> --- if_aue.c 19 Nov 2001 18:47:49 -0000 1.44
> +++ if_aue.c 3 Jan 2002 18:33:22 -0000
> @@ -117,6 +117,7 @@
> { USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB, 0 },
> { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX, LSYS },
> { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TA, LSYS },
> + { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_UNKNOWN, LSYS },
> { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TX, 0 },
> { USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_KNU101TX, 0 },
> { USB_VENDOR_ABOCOM, USB_PRODUCT_DLINK_DSB650TX_PNA, 0 },
>
I just tried something similar, I replaced the orriginal USB100TX's
product id with the new ones in usbdevs and usbdevs.h and recompiled.
Worked like a charm. The exact model as listed on the unit and
Linksys's paperwork is USB100TX, just like the older unit.
Joshua Coombs
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020103134306.A23765>