Date: Fri, 22 Aug 1997 09:46:18 +0000 (GMT) From: David Ramahefason <rama@easynet.fr> To: Steve Passe <smp@csn.net> Cc: smp@FreeBSD.ORG Subject: Re: Need Help on installing SMP on SNAP 3.0 Message-ID: <Pine.BSF.3.96.970822094446.2624A-100000@casimir.easynet.fr> In-Reply-To: <199708212056.OAA25112@Ilsa.StevesCafe.com>
index | next in thread | previous in thread | raw e-mail
On Thu, 21 Aug 1997, Steve Passe wrote:
> Hi,
>
> > We've just bought a bi-pentium card:
> > ...
> > The UP boot works fine... the compilation for an SMP kernel
> > works fine... but when I try to boot it, it hangs just before
> > the disk stuff... and nothing occurs...
> > Did someone already tested these cards ??? Could someone tell me the good
> > options to set up in the Kernel config....
>
> this hardware (to the degree you described it) should work fine, but you
> need to supply MUCH more info to get an answer:
>
> what version of 3.0?, date, etc.
> what disk controller/disks?
> what SMP options did you use?
> be more specific about what happens, eg, give us the last half dozen messages
> to come out before it hangs.
> give us the output of "mptable -dmesg" (from a UP kernel is fine).
Ooops tou're right...
here's an output of mptable -verbose -dmesg:
===============================================================================
MPTable, version 2.0.13
looking for EBDA pointer @ 0x040e, NOT found
searching CMOS 'top of mem' @ 0x0009fc00 (639K)
searching BIOS @ 0x000f0000
MP FPS found in BIOS @ physical addr: 0x000f61f0
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f61f0
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0x4b
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f5dec
signature: 'PCMP'
base table length: 244
version: 1.1
checksum: 0x5c
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 22
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x10 BSP, usable 5 2 12 0x03bf
1 0x10 AP, usable 5 2 12 0x03bf
--
Bus: Bus ID Type
0 PCI
1 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT#
ExtINT conforms conforms 1 0 2 0
INT conforms conforms 1 1 2 1
INT conforms conforms 1 0 2 2
INT conforms conforms 1 3 2 3
INT conforms conforms 1 4 2 4
INT conforms conforms 1 5 2 5
INT conforms conforms 1 6 2 6
INT conforms conforms 1 7 2 7
INT conforms conforms 1 8 2 8
INT conforms conforms 1 9 2 9
INT conforms conforms 1 14 2 14
INT conforms conforms 1 15 2 15
INT active-lo level 1 11 2 17
INT active-lo level 1 10 2 18
INT active-lo level 1 12 2 19
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT#
ExtINT active-hi edge 1 0 255 0
NMI active-hi edge 1 0 255 1
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Useful:
#options SMP_AUTOSTART # start the additional CPUs during boot
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=2 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
-------------------------------------------------------------------------------
dmesg output:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-970807-SNAP #0: Thu Aug 21 11:53:10 CEST 1997
root@analyzer.easynet.fr:/usr/src/sys/compile/ANALYZER
CPU: Pentium (199.43-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 134217728 (131072K bytes)
avail memory = 128561152 (125548K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.1.0
ahc0: <Adaptec 2940 Ultra SCSI host adapter> rev 0x00 int a irq 10 on pci0.10.0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <FUJITSU M2952Q-512 0147> type 0 fixed SCSI 2
sd0: Direct-Access 2291MB (4693462 512 byte sectors)
sd1 at scbus0 target 1 lun 0
sd1: <SEAGATE ST34371W 0338> type 0 fixed SCSI 2
sd1: Direct-Access 4148MB (8496960 512 byte sectors)
ahc0:A:6: refuses WIDE negotiation. Using 8bit transfers
st0 at scbus0 target 6 lun 0
st0: <ARCHIVE Python 28388-XXX 5.AC> type 1 removable SCSI 2
st0: Sequential-Access density code 0x13, drive empty
vga0: <VGA-compatible display device> rev 0xd3 int a irq 11 on pci0.11.0
de0: <Digital 21140 Fast Ethernet> rev 0x12 int a irq 12 on pci0.13.0
de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:17:2f:e6
de0: enabling 100baseTX port
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
vt0 not probed due to I/O address conflict with sc0 at 0x60
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wt0 not found at 0x300
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert enabled, logging limited to 100 packets/entry
###
# in fact in SMP mode the boot hangs just here :(
de0: promiscuous mode enabled
de0: receive: 00:60:97:19:c6:8a: bad crc
===============================================================================
Any idea ??
Thanks
/David Ramahefason Administrateur Systeme/Reseau/
/rama@easynet.fr Easynet France SA /
/mobile: 0611647281 0144545333 /
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.970822094446.2624A-100000>