Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Aug 2004 10:02:22 -0400 (EDT)
From:      "Mike Jakubik" <mikej@rogers.com>
To:        freebsd-amd64@freebsd.org
Subject:   Sudden crash
Message-ID:  <1157.66.11.183.182.1091541742.squirrel@66.11.183.182>

next in thread | raw e-mail | index | archive | help
Hi all,

One of my AMD64 boxes decided to crash all of a sudden. It was running
fine for a couple of weeks however, maybe its a hardware problem. The
hardware is an Asus SK8. Regardless i thought i would post the details
that i salvaged from the daily security log.

Thanks.

---
mail.xxx.com kernel log messages:
> pid 603 (dovecot-auth), uid 0: exited on signal 10 (core dumped)
> Sorry, need DDB option to print backtrace pid 15214 (dovecot-auth),
> uid 0: exited on signal 10 (core dumped) Sorry, need DDB option to
> print backtraceSorry, need DDB option to print backtraceSorry, need
> DDB option to print backtrace pid 15328 (dovecot-auth), uid 0: exited
> on signal 10 (core dumped) kernel trap 12 with interrupts disabled
>
>
> Fatal trap 12: page fault while in kernel mode
> fault virtual address	= 0x48
> fault code		= supervisor read, page not present
> instruction pointer	= 0x8:0xffffffff801e6b17
> stack pointer	        = 0x10:0xffffffff94c41ad0
> frame pointer	        = 0x10:0xffffff0012b10000
> code segment		= base 0x0, limit 0xfffff, type 0x1b
> 			= DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags	= resume, IOPL = 0
> current process		= 35 (swi8: clock)
> trap number		= 12
> panic: page fault
>
> syncing disks, buffers remaining... 3797 3797 Copyright (c) 1992-2004
The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-CURRENT #0: Thu Jun 24 11:55:40 EDT 2004
>     root@mail.xxx.com:/usr/obj/usr/src/sys/MAIL
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff804ef000.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 Processor 3000+ (2002.58-MHz K8-class CPU)
>   Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
>   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>   AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
> real memory  = 536018944 (511 MB)
> avail memory = 510492672 (486 MB)
> ACPI APIC Table: <A M I  OEMAPIC >
> ioapic0: Changing APIC ID to 1
> MADT: Forcing active-low polarity and level trigger for SCI ioapic0
> <Version 0.3> irqs 0-23 on motherboard
> random: <entropy source, Software, Yarrow>
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: [GIANT-LOCKED]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1
> - AE_NOT_FOUND
> pci1: <ACPI PCI bus> on pcib1
> pcib1: slot 0 INTA is routed to irq 16
> pci1: <display, VGA> at device 0.0 (no driver attached)
> atapci0: <Promise PDC20376 SATA150 controller> port
> 0xdc00-0xdc7f,0xec00-0xec0f,0xc000-0xc03f mem
> 0xfda00000-0xfda1ffff,0xfdb00000-0xfdb00fff irq 18 at device 8.0 on
> pci0
> atapci0: failed: rid 0x20 is memory, requested 4
> ata2: at 0xfdb00000 on atapci0
> ata3: at 0xfdb00000 on atapci0
> ata4: at 0xfdb00000 on atapci0
> skc0: <Marvell Gigabit Ethernet> port 0xc400-0xc4ff mem
> 0xfdd00000-0xfdd03fff irq 17 at device 10.0 on pci0
> skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:0e:a6:8c:0d:7e
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseTX-FDX, auto
> skc0: [GIANT-LOCKED]
> ste0: <D-Link DL10050 10/100BaseTX> port 0xc800-0xc87f mem
> 0xfdf00000-0xfdf001ff irq 17 at device 12.0 on pci0
> miibus1: <MII bus> on ste0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus1
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ste0: Ethernet address: 00:05:5d:fe:06:4b
> ste0: [GIANT-LOCKED]
> atapci1: <VIA 6420 SATA150 controller> port
> 0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,0xe400-0xe403,
> 0xe800-0xe807 irq 20 at device 15.0 on pci0
> ata5: at 0xe800 on atapci1
> ata6: at 0xe000 on atapci1
> atapci2: <VIA 8237 UDMA133 controller> port
> 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci2
> ata1: at 0x170 irq 15 on atapci2
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 Timecounter "TSC" frequency 2002575096 Hz quality 800
> Timecounters tick every 0.976 msec
> acd0: CDRW <MATSHITA CD-RW CW-7586> at ata0-master PIO4
> ad4: 117246MB <Maxtor 6Y120M0> [238216/16/63] at ata2-master SATA150
> ad6: 117246MB <Maxtor 6Y120M0> [238216/16/63] at ata3-master SATA150
> ar0: 116348MB <ATA RAID1 array> [14832/255/63] status: READY subdisks:
>  disk0 READY on ad4 at ata2-master
>  disk1 READY on ad6 at ata3-master
> Mounting root from ufs:/dev/ar0s1a
> WARNING: / was not properly dismounted pid 526 (qmgr), uid 125: exited
> on signal 11

mail.xxx.com login failures:

mail.xxx.com refused connections:

-- End of security output --



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1157.66.11.183.182.1091541742.squirrel>