Date: Sat, 26 May 2001 08:08:14 +1000 From: Jason Oakley <waulok@bangrocks.com> To: questions@FreeBSD.ORG Subject: two NICs - one works other doesnt Message-ID: <4.3.2.7.2.20010526080516.00ae04f0@bangrocks.com>
next in thread | raw e-mail | index | archive | help
hey. I have a machine I've just built and it has two NICs in it. The 3com Etherlink III got detected on install, but the Accton didn't. I have also tried an EZ3200PCT+ and some other unnamed card, but rebooting does not detect any of them. Is there some software I can use to detect the settings on these cards in FreeBSD or are these cards not supported.. or is there a FAQ on installing multiple NICs or a FAQ for installing new hardware (how to detect the new card). DMESG: ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: Ethernet address 00:60:97:02:c0:62 and I have configured the card with an IP address: ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::260:97ff:fe02:c062%ep0 prefixlen 64 scopeid 0x1 ether 00:60:97:02:c0:62 media: 10baseT/UTP supported media: 10baseT/UTP 10base5/AUI tnx ---------------------------- You should be Banging Rocks! http://www.bangrocks.com _ .oO(_)Oo. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20010526080516.00ae04f0>