Date: Wed, 31 Oct 2001 07:18:11 -0500 (EST) From: "Ilmar S. Habibulin" <ilmar@watson.org> To: freebsd-current@freebsd.org Subject: Fatal trap 12 with recent current (notebook with network pc-card) Message-ID: <20011031064753.B77432-100000@fledge.watson.org>
next in thread | raw e-mail | index | archive | help
I have Mitac 7020 notebook with Apollo 10/100M Fast Ethernet PC Card.
Today i cvsuped recent current and now kernel panics ufter card insertion
with the folowing message:
pccard: card inserted, slot 0
<date time> mobile pccardd[186]: Card "Dual Speed"("10/100 PC Card") [1.0]
[ ] matched "Dual Speed" ("/10/100( Port Attached)? PC Card/") [(null)]
[(null)]
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x3c
fault core = supervisor write, page not present
instruction pointer = 0x8:0xc01cceb1
stack pointer = 0x10:0xc698ab00
frame pointer = 0x10:0xc698ab00
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 186 (pccardd)
kernel: type 12 trap, code=0
Stopped at device_set_flags+0x9: movl %eax,0x3c(%edx)
kernel config is:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the NOTES configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.313 2001/07/02 21:01:48 brooks Exp $
machine i386
cpu I686_CPU
ident NOTEBOOK
maxusers 32
#options VISUAL_USERCONFIG #visual boot -c editor
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
#options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# Debugging for use in -current
options DDB
options INVARIANTS
options INVARIANT_SUPPORT
options WITNESS
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1 # At keyboard controller
device atkbd # at keyboard
device psm # psm mouse
device vga # VGA screen
# splash screen/screen saver
device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
#device acpica
#options ACPI_DEBUG
# PCCARD (PCMCIA) support
device card # pccard bus
device pcic # PCMCIA bridge
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
device pcm # Sound!!!
#################################
#
#
options ATKBD_DFLT_KEYMAP
makeoptions ATKBD_DFLT_KEYMAP="ru.koi8-r"
options SC_DFLT_FONT
makeoptions SC_DFLT_FONT="koi8-r"
dmesg output is:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Oct 30 15:10:38 MSK 2001
root@mobile.:/usr/src/sys/i386/compile/NOTEBOOK
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 125348371 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (125.35-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 67043328 (65472K bytes)
avail memory = 60870656 (59444K bytes)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0449000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04490a8.
Pentium Pro MTRR support enabled
Using $PIR table, 5 entries at 0xc00fe840
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <OID_00 RSDT_000> on motherboard
Timecounter "ACPI" frequency 3579545 Hz
can't fetch resources for \\_SB_.PCI0.PX40.COPR - AE_BAD_DATA
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1100-0x110f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1040-0x105f irq 128 at device 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcic0: <TI PCI-1225 PCI-CardBus Bridge> mem 0x44000000-0x44000fff irq 10 at device 8.0 on pci0
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1225 PCI-CardBus Bridge> mem 0x44001000-0x44001fff irq 10 at device 8.1 on pci0
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe9000000-0xe90fffff,0xe8000000-0xe8000fff irq 5 at device 9.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xf1000-0xf1fff on isa0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
RTC BIOS diagnostic error 20<config_unit>
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: ATAPI identify failed
ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA33
acd0: MODE_SENSE_BIG trying to write on read buffer
acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
acd0: CDROM <CD-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
Any instruction or help to trace and solve the problem?
Thank you.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011031064753.B77432-100000>