Date: Wed, 6 Oct 2010 17:35:27 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: cvs-src-old@freebsd.org Subject: cvs commit: src/sys/dev/bge if_bge.c if_bgereg.h Message-ID: <201010061735.o96HZbsr084271@repoman.freebsd.org>
index | next in thread | raw e-mail
yongari 2010-10-06 17:35:27 UTC
FreeBSD src repository
Modified files:
sys/dev/bge if_bge.c if_bgereg.h
Log:
SVN rev 213485 on 2010-10-06 17:35:27Z by yongari
Overhaul MII register access routine and remove unnecessary
BGE_MI_MODE register accesses. Previously bge(4) used to read
BGE_MI_MODE register to detect whether it needs to disable
autopolling feature or not. Because we don't touch autopolling in
other part of driver there is no reason to read BGE_MI_MODE
register given that we know default value in advance. In order to
achieve the goal, check whether the controller has CPMU(Central
Power Mangement Unit) capability. If controller has CPMU feature,
use 500KHz MII management interface(mdio/mdc) frequency regardless
core clock frequency. Otherwise use default MII clock. While I'm
here, add CPMU register definition.
In bge_miibus_readreg(), rearrange code a bit and remove goto
statement. In bge_miibus_writereg(), make sure to restore
autopolling even if MII write failed. The delay time inserted after
accessing BGE_MI_MODE register increased from 40us to 80us.
The default PHY address is now stored in softc. All PHYs supported
by bge(4) currently uses PHY address 1 but it will be changed when
we add newer controllers. This change will make it easier to change
default PHY address depending on PHY models.
Submitted by: davidch
Revision Changes Path
1.315 +43 -39 src/sys/dev/bge/if_bge.c
1.109 +51 -0 src/sys/dev/bge/if_bgereg.h
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010061735.o96HZbsr084271>