Date: Sun, 29 Apr 2001 23:14:08 -0700 (PDT) From: KP <keith_proffitt@yahoo.com> To: FreeBSD-questions@freebsd.org Subject: Kernel/Config Install problems (DFE-530TX+, fd0, config> di fe0, and more. Message-ID: <20010430061408.25058.qmail@web3306.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
First, I want to thank the people that respond to my
call for help. Thank you.
Keith Proffitt
keith_proffitt@yahoo.com
--------
My system is:
OS = FreeBSD 4.2-RELEASE #0
HD = 3052MB <SAMSUNG SV0322A> [11024/9/63]
CPU = Pentium/P54C (199.43-MHz 586-class CPU)
Memory = 64MB
Videocard = Diamond’s Stealth III S540
NIC = DLink DFE-530TX+ (I have read people saying rl
is the driver for this.)
CDROM = Mitsumi CRMC-FX820S
Mouse = PS/2 (logitec wheel mouse)
Soundcard = Opti soundcard.
No SCSI or USB device
---------
I am extremely new to any *NIX OS (brought up on MS).
I need to know how to config the kernal to see
(identify) the DLink DFE-530TX+ NIC and load the
proper device driver (rl ???).
My attempts have been to re-install the OS several
times, modify the rc.conf file, and compile a
cutomized kernel. All have failed and caused other
problems.
Below is the dmesg output, messages log, and kernel
configuration file. Again, thanks for any help.
-------------
DMESG
-------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.2-RELEASE #0: Sun Apr 29 14:47:49 PDT 2001
root@:/usr/src/sys/compile/YHVH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (199.43-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
config> q
avail memory = 62513152 (61048K bytes)
Preloaded elf kernel "kernel" at 0xc02d9000.
Preloaded userconfig_script "/boot/kernel.conf" at
0xc02d909c.
Intel Pentium detected, installing workaround for F00F
bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port
0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <unknown card> (vendor=0x1186, dev=0x1300) at
17.0 irq 10
pci0: <S3 ViRGE graphics accelerator> at 18.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 3052MB <SAMSUNG SV0322A> [11024/9/63] at
ata0-master WDMA2
acd0: CDROM <FX820S> at ata0-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
cd9660: RockRidge Extension
fd0c: hard error reading fsbn 0 of 0-3 (No status)
fd0c: hard error writing fsbn 7 of 7-9 (No status)
fd0c: hard error writing fsbn 16 of 16-18 (No status)
fd0c: hard error writing fsbn 19 (No status)
fd0c: hard error writing fsbn 2127 (No status)
fd0c: hard error writing fsbn 2127 (No status)
fd0c: hard error writing fsbn 2127 (No status)
-------------
messages log
-------------
Apr 29 16:23:38 /kernel: Copyright (c) 1992-2000 The
FreeBSD Project.
Apr 29 16:23:38 /kernel: Copyright (c) 1979, 1980,
1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 29 16:23:38 /kernel: The Regents of the
University of California. All rights reserved.
Apr 29 16:23:38 /kernel: FreeBSD 4.2-RELEASE #0: Sun
Apr 29 14:47:49 PDT 2001
Apr 29 16:23:38 /kernel:
root@:/usr/src/sys/compile/YHVH
Apr 29 16:23:38 /kernel: Timecounter "i8254"
frequency 1193182 Hz
Apr 29 16:23:38 /kernel: CPU: Pentium/P54C
(199.43-MHz 586-class CPU)
Apr 29 16:23:38 /kernel: Origin = "GenuineIntel" Id
= 0x52c Stepping = 12
Apr 29 16:23:38 /kernel:
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Apr 29 16:23:38 /kernel: real memory = 67108864
(65536K bytes)
Apr 29 16:23:38 /kernel: config> di sn0
Apr 29 16:23:38 /kernel: config> di lnc0
Apr 29 16:23:38 /kernel: config> di ie0
Apr 29 16:23:38 /kernel: config> di fe0
Apr 29 16:23:38 /kernel: No such device: fe0
Apr 29 16:23:38 /kernel: Invalid command or syntax.
Type `?' for help.
Apr 29 16:23:38 /kernel: config> di ed0
Apr 29 16:23:38 /kernel: No such device: ed0
Apr 29 16:23:38 /kernel: Invalid command or syntax.
Type `?' for help.
Apr 29 16:23:38 /kernel: config> di cs0
Apr 29 16:23:38 /kernel: config> q
Apr 29 16:23:38 /kernel: avail memory = 62513152
(61048K bytes)
Apr 29 16:23:38 /kernel: Preloaded elf kernel
"kernel" at 0xc02d9000.
Apr 29 16:23:38 /kernel: Preloaded userconfig_script
"/boot/kernel.conf" at 0xc02d909c.
Apr 29 16:23:38 /kernel: Intel Pentium detected,
installing workaround for F00F bug
Apr 29 16:23:38 /kernel: md0: Malloc disk
Apr 29 16:23:38 /kernel: npx0: <math processor> on
motherboard
Apr 29 16:23:38 /kernel: npx0: INT 16 interface
Apr 29 16:23:38 /kernel: pcib0: <Host to PCI bridge>
on motherboard
Apr 29 16:23:38 /kernel: pci0: <PCI bus> on pcib0
Apr 29 16:23:38 /kernel: isab0: <Intel 82371SB PCI to
ISA bridge> at device 7.0 on pci0
Apr 29 16:23:38 /kernel: isa0: <ISA bus> on isab0
Apr 29 16:23:38 /kernel: atapci0: <Intel PIIX3 ATA
controller> port 0xf000-0xf00f at device 7.1 on pci0
Apr 29 16:23:38 /kernel: ata0: at 0x1f0 irq 14 on
atapci0
Apr 29 16:23:38 /kernel: pci0: <unknown card>
(vendor=0x1186, dev=0x1300) at 17.0 irq 10
Apr 29 16:23:38 /kernel: pci0: <S3 ViRGE graphics
accelerator> at 18.0 irq 11
Apr 29 16:23:38 /kernel: fdc0: <NEC 72065B or clone>
at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 29 16:23:38 /kernel: fdc0: FIFO enabled, 8 bytes
threshold
Apr 29 16:23:38 /kernel: fd0: <1440-KB 3.5" drive> on
fdc0 drive 0
Apr 29 16:23:38 /kernel: atkbdc0: <Keyboard
controller (i8042)> at port 0x60,0x64 on isa0
Apr 29 16:23:38 /kernel: atkbd0: <AT Keyboard> flags
0x1 irq 1 on atkbdc0
Apr 29 16:23:38 /kernel: kbd0 at atkbd0
Apr 29 16:23:38 /kernel: psm0: <PS/2 Mouse> irq 12 on
atkbdc0
Apr 29 16:23:38 /kernel: psm0: model MouseMan+,
device ID 0
Apr 29 16:23:38 /kernel: vga0: <Generic ISA VGA> at
port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 29 16:23:38 /kernel: sc0: <System console> at
flags 0x100 on isa0
Apr 29 16:23:38 /kernel: sc0: VGA <16 virtual
consoles, flags=0x300>
Apr 29 16:23:38 /kernel: sio0: configured irq 4 not
in bitmap of probed irqs 0
Apr 29 16:23:38 /kernel: sio0 at port 0x3f8-0x3ff irq
4 flags 0x10 on isa0
Apr 29 16:23:38 /kernel: sio0: type 8250
Apr 29 16:23:38 /kernel: sio1: configured irq 3 not
in bitmap of probed irqs 0
Apr 29 16:23:38 /kernel: ppc0: <Parallel port> at
port 0x378-0x37f irq 7 on isa0
Apr 29 16:23:38 /kernel: ppc0: Generic chipset
(NIBBLE-only) in COMPATIBLE mode
Apr 29 16:23:38 /kernel: plip0: <PLIP network
interface> on ppbus0
Apr 29 16:23:38 /kernel: lpt0: <Printer> on ppbus0
Apr 29 16:23:38 /kernel: lpt0: Interrupt-driven port
Apr 29 16:23:38 /kernel: ppi0: <Parallel I/O> on
ppbus0
Apr 29 16:23:38 /kernel: ad0: 3052MB <SAMSUNG
SV0322A> [11024/9/63] at ata0-master WDMA2
Apr 29 16:23:38 /kernel: acd0: CDROM <FX820S> at
ata0-slave using PIO3
Apr 29 16:23:38 /kernel: Mounting root from
ufs:/dev/ad0s1a
Apr 29 16:27:55 login: ROOT LOGIN (root) ON ttyv0
Apr 29 19:55:34 reboot: rebooted by root
Apr 29 19:55:35 syslogd: exiting on signal 15
Apr 29 19:57:32 /kernel: Copyright (c) 1992-2000 The
FreeBSD Project.
Apr 29 19:57:32 /kernel: Copyright (c) 1979, 1980,
1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 29 19:57:32 /kernel: The Regents of the
University of California. All rights reserved.
Apr 29 19:57:32 /kernel: FreeBSD 4.2-RELEASE #0: Sun
Apr 29 14:47:49 PDT 2001
Apr 29 19:57:32 /kernel:
root@:/usr/src/sys/compile/YHVH
Apr 29 19:57:32 /kernel: Timecounter "i8254"
frequency 1193182 Hz
Apr 29 19:57:32 /kernel: CPU: Pentium/P54C
(199.43-MHz 586-class CPU)
Apr 29 19:57:32 /kernel: Origin = "GenuineIntel" Id
= 0x52c Stepping = 12
Apr 29 19:57:32 /kernel:
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Apr 29 19:57:32 /kernel: real memory = 67108864
(65536K bytes)
Apr 29 19:57:32 /kernel: config> di sn0
Apr 29 19:57:32 /kernel: config> di lnc0
Apr 29 19:57:32 /kernel: config> di ie0
Apr 29 19:57:32 /kernel: config> di fe0
Apr 29 19:57:32 /kernel: No such device: fe0
Apr 29 19:57:32 /kernel: Invalid command or syntax.
Type `?' for help.
Apr 29 19:57:32 /kernel: config> di ed0
Apr 29 19:57:32 /kernel: No such device: ed0
Apr 29 19:57:32 /kernel: Invalid command or syntax.
Type `?' for help.
Apr 29 19:57:32 /kernel: config> di cs0
Apr 29 19:57:32 /kernel: config> q
Apr 29 19:57:32 /kernel: avail memory = 62513152
(61048K bytes)
Apr 29 19:57:32 /kernel: Preloaded elf kernel
"kernel" at 0xc02d9000.
Apr 29 19:57:32 /kernel: Preloaded userconfig_script
"/boot/kernel.conf" at 0xc02d909c.
Apr 29 19:57:32 /kernel: Intel Pentium detected,
installing workaround for F00F bug
Apr 29 19:57:32 /kernel: md0: Malloc disk
Apr 29 19:57:32 /kernel: npx0: <math processor> on
motherboard
Apr 29 19:57:32 /kernel: npx0: INT 16 interface
Apr 29 19:57:32 /kernel: pcib0: <Host to PCI bridge>
on motherboard
Apr 29 19:57:32 /kernel: pci0: <PCI bus> on pcib0
Apr 29 19:57:32 /kernel: isab0: <Intel 82371SB PCI to
ISA bridge> at device 7.0 on pci0
Apr 29 19:57:32 /kernel: isa0: <ISA bus> on isab0
Apr 29 19:57:32 /kernel: atapci0: <Intel PIIX3 ATA
controller> port 0xf000-0xf00f at device 7.1 on pci0
Apr 29 19:57:32 /kernel: ata0: at 0x1f0 irq 14 on
atapci0
Apr 29 19:57:32 /kernel: pci0: <unknown card>
(vendor=0x1186, dev=0x1300) at 17.0 irq 10
Apr 29 19:57:32 /kernel: pci0: <S3 ViRGE graphics
accelerator> at 18.0 irq 11
Apr 29 19:57:32 /kernel: fdc0: <NEC 72065B or clone>
at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 29 19:57:32 /kernel: fdc0: FIFO enabled, 8 bytes
threshold
Apr 29 19:57:32 /kernel: fd0: <1440-KB 3.5" drive> on
fdc0 drive 0
Apr 29 19:57:32 /kernel: atkbdc0: <Keyboard
controller (i8042)> at port 0x60,0x64 on isa0
Apr 29 19:57:32 /kernel: atkbd0: <AT Keyboard> flags
0x1 irq 1 on atkbdc0
Apr 29 19:57:32 /kernel: kbd0 at atkbd0
Apr 29 19:57:32 /kernel: psm0: <PS/2 Mouse> irq 12 on
atkbdc0
Apr 29 19:57:32 /kernel: psm0: model MouseMan+,
device ID 0
Apr 29 19:57:32 /kernel: vga0: <Generic ISA VGA> at
port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 29 19:57:32 /kernel: sc0: <System console> at
flags 0x100 on isa0
Apr 29 19:57:32 /kernel: sc0: VGA <16 virtual
consoles, flags=0x300>
Apr 29 19:57:32 /kernel: sio0: configured irq 4 not
in bitmap of probed irqs 0
Apr 29 19:57:32 /kernel: sio0 at port 0x3f8-0x3ff irq
4 flags 0x10 on isa0
Apr 29 19:57:32 /kernel: sio0: type 8250
Apr 29 19:57:32 /kernel: sio1: configured irq 3 not
in bitmap of probed irqs 0
Apr 29 19:57:32 /kernel: ppc0: <Parallel port> at
port 0x378-0x37f irq 7 on isa0
Apr 29 19:57:32 /kernel: ppc0: Generic chipset
(NIBBLE-only) in COMPATIBLE mode
Apr 29 19:57:32 /kernel: plip0: <PLIP network
interface> on ppbus0
Apr 29 19:57:32 /kernel: lpt0: <Printer> on ppbus0
Apr 29 19:57:32 /kernel: lpt0: Interrupt-driven port
Apr 29 19:57:32 /kernel: ppi0: <Parallel I/O> on
ppbus0
Apr 29 19:57:32 /kernel: ad0: 3052MB <SAMSUNG
SV0322A> [11024/9/63] at ata0-master WDMA2
Apr 29 19:57:32 /kernel: acd0: CDROM <FX820S> at
ata0-slave using PIO3
Apr 29 19:57:32 /kernel: Mounting root from
ufs:/dev/ad0s1a
Apr 29 19:58:29 login: ROOT LOGIN (root) ON ttyv0
Apr 29 20:25:45 /kernel: cd9660: RockRidge Extension
Apr 29 21:28:02 /kernel: fd0c: hard error reading
fsbn 0 of 0-3 (No status)
Apr 29 21:39:30 /kernel: fd0c: hard error writing
fsbn 7 of 7-9 (No status)
Apr 29 21:39:32 /kernel: fd0c: hard error writing
fsbn 16 of 16-18 (No status)
Apr 29 21:39:34 /kernel: fd0c: hard error writing
fsbn 19 (No status)
Apr 29 21:39:37 /kernel: fd0c: hard error writing
fsbn 2127 (No status)
Apr 29 21:39:44 last message repeated 2 times
-------------
kernel configuration file
-------------
#
# YHVH -- Customized kernel configuration file for
this FreeBSD/i386 system
#
# For more information on this file, please read the
handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in
/usr/share/doc/handbook
# if you've installed the doc distribution, otherwise
always see the
# FreeBSD World Wide Web server
(http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed
explanations of the
# device lines is also present in the ./LINT
configuration file. If you are
# in doubt as to the purpose or necessity of a line,
check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/YHVH,v 1.0 2001/04/29
23:16:07 n_hibma Exp $
machine i386
cpu I586_CPU
ident YHVH
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options GPL_MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS
required
#options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before
probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in
/dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI
devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI
access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
#device dpt # DPT Smartcache - See LINT for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2
mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an
SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220
compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with
the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 #
Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557,
82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card
(``Wiseman'')
# PCI Ethernet NICs that use the common MII bus
controller code.
# NOTE: Be sure to keep the 'device miibus' line in
order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device pcn # AMD Am79C79x PCI 10/100 NICs
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS
7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# WaveLAN/IEEE 802.11 wireless NICs. Note: the
WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA
attatement needed
# and resources will always be dynamically assigned by
the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the
declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards
set to ISA PnP
# mode (the factory default). If you set the switches
on your ISA
# card for a manually chosen I/O address and IRQ, you
must specify
# those paremeters here.
#device an
# Xircom Ethernet
#device xe
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units
to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying
(translation)
# The `bpf' pseudo-device enables the Berkeley Packet
Filter.
# Be aware of the administrative consequences of
enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus
and da
#device ums # Mouse
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
Keith Proffitt
keith_proffitt@yahoo.com
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010430061408.25058.qmail>