Date: Mon, 9 Jun 2003 08:09:58 +0400 From: Vladik Kozin <epbox@yandex.ru> To: Scott Mitchell <scott+freebsd@fishballoon.org> Cc: freebsd-questions@freebsd.org Subject: Re: USB Flash Memory Drives support under FreeBSD Message-ID: <200306090809.58515.epbox@yandex.ru> In-Reply-To: <20030608162837.GB26871@tuatara.fishballoon.org> References: <200306081948.36329.epbox@yandex.ru> <20030608162837.GB26871@tuatara.fishballoon.org>
index | next in thread | previous in thread | raw e-mail
On Sunday 08 June 2003 20:28, you wrote: > On Sun, Jun 08, 2003 at 07:48:36PM +0400, Vladik Kozin wrote: > > Are such devices as for instance, IBM MagicKey, PQI Intelligent Stick, > > USBdrive, ThumbDrive and other USB Flash Memory Drives, supported by > > FreeBSD. I know most of them are supported by Linux, so one doesn't have > > to install any drivers before use. > > I've checked Hardware Notes for both 4.8 and 5.0 Releases - nothing > > approprate :( > > Hi Vladik, > > funnily enough, this has just been discussed over on the -stable list. The > consensus seems to be that most USB mass storage devices will just work -- > especially those that don't need any special drivers on Windows or (better > yet) Linux. This has certainly been my experience with various memory card > readers and 'pen drives'. > > Some devices might need a 'quirk' entry adding to the kernel to cope with > their particular weirdness. These are pretty easy to add if you don't mind > rebuilding your kernel. I surely never mind doing this :) Once you've got a working source for your kernel, you'll never get into big problems, cause each time you need to add only a few strings. So, you always can say which strings happened to become a problem. > > I fully agree that the existing documentation isn't as helpful as it could > be. I was going to put together some changes to make it clearer what is > actually supported, which you have now reminded me about :-) > > Cheers, > > Scott Thanks for you answer. I was going to buy one of those 'pen drives' for myself. Nothing seems to prevent me from doing this now :) I believe its always a good idea to check the compatibility of the hardware one's going to buy with the OS used. Best regards. Vladikhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200306090809.58515.epbox>