Date: Fri, 14 Apr 2017 21:06:08 +0200 From: "Ronald Klop" <ronald-lists@klop.ws> To: "Adrian Chadd" <adrian.chadd@gmail.com> Cc: freebsd-current <freebsd-current@freebsd.org> Subject: Re: if_iwn dhcp troubles (solved) Message-ID: <op.yyo8ois2kndu52@53556c9c.cm-6-6b.dynamic.ziggo.nl> In-Reply-To: <op.yisiyupdkndu52@53555a16.cm-6-6b.dynamic.ziggo.nl> References: <op.yh75shomkndu52@53555a16.cm-6-6b.dynamic.ziggo.nl> <CAJ-VmonR5bW4B_AvBHXO3Tm8wbvyYJcs26V8pKSQYPXCR1vyGg@mail.gmail.com> <op.yh8tv0gwkndu52@ronaldradial.radialsg.local> <CAJ-VmonnqrR2t8J5ytD_oHU%2B1pTC91qZfAv56-o2=zjGqgYyqQ@mail.gmail.com> <op.yian0twbkndu52@53555a16.cm-6-6b.dynamic.ziggo.nl> <CAJ-Vmo=m519QP1YPnoVwAyoN9YZECHz5-VhLV_Bqi_jT9JoM1g@mail.gmail.com> <op.yisiyupdkndu52@53555a16.cm-6-6b.dynamic.ziggo.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Since the latest iwn changes my laptop does pick up the network/dhcp settings immediately. No more DHCP trouble and 'fatal firmware error' problems anymore. Thanks and regards, Ronald. On Thu, 09 Jun 2016 14:43:32 +0200, Ronald Klop <ronald-lists@klop.ws> wrote: > Hello Adrian, > > See attachments. One is with and one is without -ht option. > > # 14:40:52 root@sjakie [~] > uname -a > FreeBSD sjakie.klop.ws 11.0-ALPHA1 FreeBSD 11.0-ALPHA1 #7 r300901M: Sat > May 28 16:54:00 CEST 2016 > root@sjakie.klop.ws:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 > > Regards, > Ronald. > > > > On Tue, 31 May 2016 02:38:38 +0200, Adrian Chadd <adrian.chadd@gmail.com> > wrote: > >> hi, >> >> what's the output of 'ifconfig -v wlan0 list scan' ? >> >> >> -a >> >> >> On 30 May 2016 at 14:15, Ronald Klop <ronald-lists@klop.ws> wrote: >>> On Mon, 30 May 2016 03:01:10 +0200, Adrian Chadd >>> <adrian.chadd@gmail.com> >>> wrote: >>> >>>> ok, so there seem to be more lingering 802.11n issues. can you tell me >>>> mrore about the environment there, so I can try to duplicate it? >>>> >>>> I'd like to fix whatever 11n issues there are in iwn! >>>> >>>> Thanks! >>>> >>>> >>>> -a >>> >>> >>> Hi Adrian, >>> >>> I don't know what you want to know, but it is just my laptop at home. I >>> installed an Intel WiFi card, because the Broadcom it had didn't have >>> support in FreeBSD. I normally have if_lagg configured, but disabled it >>> to >>> debug this. >>> I connect with WiFi to a Ubiquiti Unifi AP AC Lite >>> (https://www.ubnt.com/unifi/unifi-ap-ac-lite/). >>> Other (non-freebsd) devices, like a phone, connect happily with the >>> WiFi. >>> >>> >>> pciconf -vl: >>> ... >>> iwn0@pci0:4:0:0: class=0x028000 card=0x40608086 chip=0x088e8086 >>> rev=0x24 hdr=0x00 >>> vendor = 'Intel Corporation' >>> device = 'Centrino Advanced-N 6235' >>> class = network >>> ... >>> ================= >>> cat /etc/wpa_supplicant.conf (really plain) >>> network={ >>> ssid="xxxxxxxxx" >>> psk="yyyyyyyy" >>> } >>> ================= >>> cat /etc/rc.conf: >>> # Kernel >>> zfs_enable="YES" >>> saver="green" >>> accounting_enable="YES" >>> powerd_enable="YES" >>> devfs_system_ruleset="system" >>> background_fsck="NO" >>> dumpdev="AUTO" >>> kld_list="coretemp ichsmb radeonkms fuse if_lagg vboxdrv cuse" >>> keymap="/etc/keymap.test" >>> # if_bwn bwn_v4_lp_ucode" >>> >>> # Networking >>> hostname="sjakie.klop.ws" >>> #wpa_supplicant_flags="$wpa_supplicant_flags -d" >>> wlans_iwn0="wlan0" >>> create_args_wlan0="wlanaddr 00:26:b9:12:40:a4 country NL" >>> ifconfig_wlan0="-ht WPA" >>> #ifconfig_bge0="up" >>> #cloned_interfaces="lagg0" >>> #ifconfig_lagg0="laggproto failover laggport bge0 laggport wlan0 >>> SYNCDHCP" >>> >>> ifconfig_wlan0="$ifconfig_wlan0 DHCP" >>> >>> #ifconfig_DEFAULT="SYNCDHCP" >>> #ifconfig_em0_alias0="inet 192.168.1.36 netmask 0xffffffff" >>> firewall_enable="YES" >>> firewall_type="/etc/ipfw.sjakie" >>> #local_unbound_enable="YES" >>> >>> # Daemons >>> ntpdate_enable="YES" >>> ntpd_enable="YES" >>> sshd_enable="YES" >>> inetd_enable="YES" >>> syslogd_flags="" >>> sendmail_enable="NO" >>> sendmail_submit_enable="NO" >>> sendmail_outbound_enable="NO" >>> sendmail_msp_queue_enable="NO" >>> >>> # Bluetooth >>> #hcsecd_enable="YES" >>> #sdpd_enable="YES" >>> #bthidd_enable="YES" >>> >>> # Ports >>> bsdstats_enable="YES" >>> #postfix_enable="YES" >>> #smtpd_enable="YES" >>> #smtpd_flags="-v" >>> cupsd_enable="YES" >>> dbus_enable="YES" >>> polkitd_enable="YES" >>> #hald_enable="YES" >>> smartd_enable="YES" >>> #mdnsd_enable="YES" >>> avahi_daemon_enable="YES" >>> bruteblockd_enable="YES" >>> bruteblockd_table="1" >>> bruteblockd_flags="-s 5" >>> #collectd_enable="YES" >>> >>> rpcbind_enable="YES" >>> #nfs_client_enable="YES" >>> mountd_enable="YES" >>> nfs_server_enable="YES" >>> >>> panicmail_enable="YES" >>> slim_enable="YES" >>> >>> webcamd_enable="YES" >>> webcamd_flags="-m v4l2-dev.v4l_hflip=1" >>> >>> >>> ============= >>> dmesg: >>> Copyright (c) 1992-2016 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >>> 1994 >>> The Regents of the University of California. All rights >>> reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 11.0-ALPHA1 #7 r300901M: Sat May 28 16:54:00 CEST 2016 >>> root@sjakie.klop.ws:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 >>> FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on >>> LLVM >>> 3.8.0) >>> can't re-use a leaf (ixl_rx_miss_bufs)! >>> VT(vga): resolution 640x480 >>> CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2094.80-MHz >>> K8-class >>> CPU) >>> Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 >>> Stepping=10 >>> >>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >>> >>> Features2=0xc00e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> >>> AMD Features=0x20100800<SYSCALL,NX,LM> >>> AMD Features2=0x1<LAHF> >>> TSC: P-state invariant, performance statistics >>> real memory = 4294967296 (4096 MB) >>> avail memory = 4047171584 (3859 MB) >>> Event timer "LAPIC" quality 400 >>> ACPI APIC Table: <PTLTD APIC > >>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >>> FreeBSD/SMP: 1 package(s) x 2 core(s) >>> random: unblocking device. >>> ioapic0 <Version 2.0> irqs 0-23 on motherboard >>> random: entropy device external interface >>> kbd1 at kbdmux0 >>> netmap: loaded module >>> module_register_init: MOD_LOAD (vesa, 0xffffffff80fe16e0, 0) error 19 >>> vtvga0: <VT VGA driver> on motherboard >>> cryptosoft0: <software crypto> on motherboard >>> acpi0: <DELL QA09 > on motherboard >>> acpi0: Power Button (fixed) >>> Timecounter "HPET" frequency 14318180 Hz quality 950 >>> Event timer "HPET" frequency 14318180 Hz quality 450 >>> Event timer "HPET1" frequency 14318180 Hz quality 440 >>> Event timer "HPET2" frequency 14318180 Hz quality 440 >>> Event timer "HPET3" frequency 14318180 Hz quality 440 >>> cpu0: <ACPI CPU> on acpi0 >>> cpu1: <ACPI CPU> on acpi0 >>> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >>> atrtc0: Warning: Couldn't map I/O. >>> Event timer "RTC" frequency 32768 Hz quality 0 >>> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>> Event timer "i8254" frequency 1193182 Hz quality 100 >>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >>> acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 >>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >>> pci0: <ACPI PCI bus> on pcib0 >>> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 >>> pcib1: [GIANT-LOCKED] >>> pci1: <ACPI PCI bus> on pcib1 >>> vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem >>> 0xd0000000-0xdfffffff,0xfc000000-0xfc00ffff irq 16 at device 0.0 on >>> pci1 >>> vgapci0: Boot video device >>> hdac0: <ATI RV730 HDA Controller> mem 0xfc010000-0xfc013fff irq 17 at >>> device >>> 0.1 on pci1 >>> uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 16 >>> at >>> device 26.0 on pci0 >>> usbus0 on uhci0 >>> uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 21 >>> at >>> device 26.1 on pci0 >>> usbus1 on uhci1 >>> uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 19 >>> at >>> device 26.2 on pci0 >>> usbus2 on uhci2 >>> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem >>> 0xfc504800-0xfc504bff >>> irq 19 at device 26.7 on pci0 >>> usbus3: EHCI version 1.0 >>> usbus3 on ehci0 >>> hdac1: <Intel 82801I HDA Controller> mem 0xfc500000-0xfc503fff irq 22 >>> at >>> device 27.0 on pci0 >>> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >>> pcib2: [GIANT-LOCKED] >>> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 >>> pcib3: [GIANT-LOCKED] >>> pci2: <ACPI PCI bus> on pcib3 >>> iwn0: <Intel Centrino Advanced 6235> mem 0xf8000000-0xf8001fff irq 17 >>> at >>> device 0.0 on pci2 >>> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 >>> pcib4: [GIANT-LOCKED] >>> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 >>> pcib5: [GIANT-LOCKED] >>> pci3: <ACPI PCI bus> on pcib5 >>> bge0: <Broadcom NetLink Gigabit Ethernet Controller , ASIC rev. >>> 0x5784100> mem 0xfc100000-0xfc10ffff irq 17 at device 0.0 on pci3 >>> bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E >>> miibus0: <MII bus> on bge0 >>> brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 >>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >>> bge0: Using defaults for TSO: 65518/35/2048 >>> bge0: Ethernet address: 00:26:b9:12:40:a4 >>> uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 >>> at >>> device 29.0 on pci0 >>> usbus4 on uhci3 >>> uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 >>> at >>> device 29.1 on pci0 >>> usbus5 on uhci4 >>> uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 >>> at >>> device 29.2 on pci0 >>> usbus6 on uhci5 >>> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem >>> 0xfc504c00-0xfc504fff >>> irq 23 at device 29.7 on pci0 >>> usbus7: EHCI version 1.0 >>> usbus7 on ehci1 >>> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >>> pci4: <ACPI PCI bus> on pcib6 >>> pci4: <serial bus, FireWire> at device 1.0 (no driver attached) >>> sdhci_pci0: <RICOH R5C822 SD> mem 0xfc200800-0xfc2008ff irq 18 at >>> device 1.1 >>> on pci4 >>> sdhci_pci0: 1 slot(s) allocated >>> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >>> isa0: <ISA bus> on isab0 >>> ahci0: <Intel ICH9M AHCI SATA controller> port >>> 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df >>> mem >>> 0xfc504000-0xfc5047ff irq 19 at device 31.2 on pci0 >>> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported >>> ahcich0: <AHCI channel> at channel 0 on ahci0 >>> ahcich1: <AHCI channel> at channel 1 on ahci0 >>> ahcich5: <AHCI channel> at channel 5 on ahci0 >>> acpi_button0: <Power Button> on acpi0 >>> acpi_button1: <Sleep Button> on acpi0 >>> acpi_lid0: <Control Method Lid Switch> on acpi0 >>> acpi_acad0: <AC Adapter> on acpi0 >>> battery0: <ACPI Control Method Battery> on acpi0 >>> acpi_tz0: <Thermal Zone> on acpi0 >>> acpi_tz1: <Thermal Zone> on acpi0 >>> acpi_tz2: <Thermal Zone> on acpi0 >>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >>> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>> kbd0 at atkbd0 >>> atkbd0: [GIANT-LOCKED] >>> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>> psm0: [GIANT-LOCKED] >>> psm0: model Generic PS/2 mouse, device ID 0 >>> ppc0: cannot reserve I/O port range >>> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >>> est1: <Enhanced SpeedStep Frequency Control> on cpu1 >>> ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is >>> present; >>> to enable, add "vfs.zfs.prefetch_disable=0" to >>> /boot/loader.conf. >>> ZFS filesystem version: 5 >>> ZFS storage pool version: features support (5000) >>> Timecounters tick every 1.000 msec >>> hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 >>> hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 >>> pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 >>> hdacc1: <IDT 92HD73C1 HDA CODEC> at cad 0 on hdac1 >>> hdaa1: <IDT 92HD73C1 Audio Function Group> at nid 1 on hdacc1 >>> pcm1: <IDT 92HD73C1 (Analog 2.0+HP/2.0)> at nid 13,10 and 14 on hdaa1 >>> pcm2: <IDT 92HD73C1 (Analog)> at nid 15 and 19 on hdaa1 >>> usbus0: 12Mbps Full Speed USB v1.0 >>> usbus1: 12Mbps Full Speed USB v1.0 >>> usbus2: 12Mbps Full Speed USB v1.0 >>> usbus3: 480Mbps High Speed USB v2.0 >>> ugen0.1: <Intel> at usbus0 >>> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus0 >>> ugen1.1: <Intel> at usbus1 >>> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus1 >>> ugen2.1: <Intel> at usbus2 >>> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus2 >>> ugen3.1: <Intel> at usbus3 >>> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >>> usbus3 >>> usbus4: 12Mbps Full Speed USB v1.0 >>> usbus5: 12Mbps Full Speed USB v1.0 >>> usbus6: 12Mbps Full Speed USB v1.0 >>> usbus7: 480Mbps High Speed USB v2.0 >>> ugen4.1: <Intel> at usbus4 >>> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus4 >>> ugen5.1: <Intel> at usbus5 >>> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus5 >>> ugen6.1: <Intel> at usbus6 >>> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on >>> usbus6 >>> ugen7.1: <Intel> at usbus7 >>> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on >>> usbus7 >>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >>> ada0: <Samsung SSD 840 EVO 500GB EXT0BB0Q> ACS-2 ATA SATA 3.x device >>> ada0: Serial Number S1DHNSAD914271K >>> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >>> ada0: Command Queueing enabled >>> ada0: 476940MB (976773168 512 byte sectors) >>> ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> >>> cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 >>> cd0: <HL-DT-ST DVD+-RW GA11N A102> Removable CD-ROM SCSI device >>> cd0: Serial Number KZZ9B7E2004 >>> cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO >>> 8192bytes) >>> cd0: Attempt to query device size failed: NOT READY, Medium not present >>> - >>> tray open >>> SMP: AP CPU #1 Launched! >>> Timecounter "TSC" frequency 2094797271 Hz quality 1000 >>> Trying to mount root from zfs:zroot/root []... >>> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 >>> usbus1 >>> usbus0 >>> uhub0: 2 ports with 2 removable, self powered >>> uhub1: 2 ports with 2 removable, self powered >>> uhub2: 2 ports with 2 removable, self powered >>> uhub5: 2 ports with 2 removable, self powered >>> uhub4: 2 ports with 2 removable, self powered >>> uhub6: 2 ports with 2 removable, self powered >>> Root mount waiting for: usbus7 usbus3 >>> Root mount waiting for: usbus7 usbus3 >>> uhub3: 6 ports with 6 removable, self powered >>> uhub7: 6 ports with 6 removable, self powered >>> Root mount waiting for: usbus3 >>> ugen6.2: <vendor 0x8087> at usbus6 >>> ugen0.2: <Broadcom> at usbus0 >>> uhub8: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2> on usbus0 >>> Root mount waiting for: usbus3 >>> uhub8: 3 ports with 0 removable, self powered >>> ugen3.2: <CN0K143J724879B805FS> at usbus3 >>> ugen0.3: <vendor 0x413c> at usbus0 >>> ukbd0: <vendor 0x413c product 0x8157, class 0/0, rev 2.00/1.00, addr 3> >>> on >>> usbus0 >>> kbd2 at ukbd0 >>> GEOM_ELI: Device gpt/swap0.eli created. >>> GEOM_ELI: Encryption: AES-XTS 128 >>> GEOM_ELI: Crypto: software >>> ugen0.4: <vendor 0x413c> at usbus0 >>> coretemp0: <CPU On-Die Thermal Sensors> on cpu0 >>> coretemp1: <CPU On-Die Thermal Sensors> on cpu1 >>> ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c00-0x1c1f irq >>> 19 at >>> device 31.3 on pci0 >>> smbus0: <System Management Bus> on ichsmb0 >>> info: [drm] Initialized drm 1.1.0 20060810 >>> drmn0: <ATI Mobility Radeon 4500 Series> on vgapci0 >>> info: [drm] RADEON_IS_PCIE >>> info: [drm] initializing kernel modesetting (RV710 0x1002:0x9553 >>> 0x1028:0x02BE). >>> info: [drm] register mmio base: 0xFC000000 >>> info: [drm] register mmio size: 65536 >>> info: [drm] radeon_atrm_get_bios: ===> Try ATRM... >>> info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, >>> vendor=1002, device=9553 >>> info: [drm] radeon_atrm_get_bios: Get ACPI device handle >>> info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM" >>> info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: >>> AE_NOT_FOUND >>> info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... >>> info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table >>> info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: >>> AE_NOT_FOUND >>> info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... >>> info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000 >>> info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 >>> (262144 >>> bytes) >>> info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000 >>> info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... >>> info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 >>> bytes) >>> info: [drm] ATOM BIOS: BR32787 >>> drmn0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M >>> used) >>> drmn0: info: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF >>> info: [drm] Detected VRAM RAM=512M, BAR=256M >>> info: [drm] RAM width 64bits DDR >>> [TTM] Zone kernel: Available graphics memory: 2059256 kiB >>> [TTM] Initializing pool allocator >>> info: [drm] radeon: 512M of VRAM memory ready >>> info: [drm] radeon: 512M of GTT memory ready. >>> info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >>> info: [drm] Driver supports precise vblank timestamp query. >>> info: [drm] MSI enabled 1 message(s) >>> drmn0: info: radeon: using MSI. >>> info: [drm] radeon: irq initialized. >>> info: [drm] GART: num cpu pages 131072, num gpu pages 131072 >>> info: [drm] probing gen 2 caps for device 8086:2a41 = 1/0 >>> info: [drm] Loading RV710 Microcode >>> info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). >>> drmn0: info: WB enabled >>> drmn0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and >>> cpu >>> addr 0x0xfffff80014286c00 >>> drmn0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and >>> cpu >>> addr 0x0xfffff80014286c0c >>> info: [drm] ring test on 0 succeeded in 1 usecs >>> info: [drm] ring test on 3 succeeded in 1 usecs >>> info: [drm] ib test on ring 0 succeeded in 0 usecs >>> info: [drm] ib test on ring 3 succeeded in 0 usecs >>> info: [drm] radeon_device_init: Taking over the fictitious range >>> 0xd0000000-0xe0000000 >>> iicbus0: <Philips I2C bus> on iicbb0 addr 0xff >>> iic0: <I2C generic I/O> on iicbus0 >>> iicbus1: <Philips I2C bus> on iicbb1 addr 0x0 >>> iic1: <I2C generic I/O> on iicbus1 >>> iicbus2: <Philips I2C bus> on iicbb2 addr 0x0 >>> iic2: <I2C generic I/O> on iicbus2 >>> iicbus3: <Philips I2C bus> on iicbb3 addr 0x0 >>> iic3: <I2C generic I/O> on iicbus3 >>> iicbus4: <Philips I2C bus> on iicbb4 addr 0x0 >>> iic4: <I2C generic I/O> on iicbus4 >>> iicbus5: <Philips I2C bus> on iicbb5 addr 0x0 >>> iic5: <I2C generic I/O> on iicbus5 >>> iicbus6: <Philips I2C bus> on iicbb6 addr 0x0 >>> iic6: <I2C generic I/O> on iicbus6 >>> info: [drm] Radeon Display Connectors >>> info: [drm] Connector 0: >>> info: [drm] VGA-1 >>> info: [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac >>> 0x7fac >>> info: [drm] Encoders: >>> info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 >>> info: [drm] Connector 1: >>> info: [drm] HDMI-A-1 >>> info: [drm] HPD1 >>> info: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c >>> 0x7e5c >>> info: [drm] Encoders: >>> info: [drm] DFP1: INTERNAL_UNIPHY >>> info: [drm] Connector 2: >>> info: [drm] LVDS-1 >>> info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c >>> 0x7e4c >>> info: [drm] Encoders: >>> info: [drm] LCD1: INTERNAL_UNIPHY2 >>> info: [drm] Internal thermal controller with fan control >>> info: [drm] radeon: power management initialized >>> info: [drm] Connector VGA-1: get mode from tunables: >>> info: [drm] - kern.vt.fb.modes.VGA-1 >>> info: [drm] - kern.vt.fb.default_mode >>> info: [drm] Connector HDMI-A-1: get mode from tunables: >>> info: [drm] - kern.vt.fb.modes.HDMI-A-1 >>> info: [drm] - kern.vt.fb.default_mode >>> info: [drm] Connector LVDS-1: get mode from tunables: >>> info: [drm] - kern.vt.fb.modes.LVDS-1 >>> info: [drm] - kern.vt.fb.default_mode >>> info: [drm] fb mappable at 0xD0142000 >>> info: [drm] vram apper at 0xD0000000 >>> info: [drm] size 8294400 >>> info: [drm] fb depth is 24 >>> info: [drm] pitch is 7680 >>> fbd0 on drmn0 >>> VT: Replacing driver "vga" with new "fb". >>> info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0 >>> fuse-freebsd: version 0.4.4, FUSE ABI 7.8 >>> vboxdrv: fAsync=0 offMin=0x2a0 offMax=0xc05 >>> Cuse v0.1.34 @ /dev/cuse >>> wlan0: Ethernet address: 00:26:b9:12:40:a4 >>> iwn0: iwn_read_firmware: ucode rev=0x12a80601 >>> ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr >>> 2> on >>> usbus6 >>> ums0: <vendor 0x413c product 0x8158, class 0/0, rev 2.00/1.00, addr 4> >>> on >>> usbus0 >>> ums0: 3 buttons and [XY] coordinates ID=2 >>> wlan0: link state changed to UP >>> WARNING: attempt to domain_add(bluetooth) after domainfinalize() >>> WARNING: attempt to domain_add(netgraph) after domainfinalize() >>> ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to >>> deny, >>> logging disabled >>> Accounting enabled >>> >>> >>> I hope this will give a hint. If anything else is needed, please tell. >>> I can >>> also start wpa_supplicant in debug mode or other things which might >>> give >>> info. >>> >>> Regards, >>> Ronald. >>> >>> >>> >>> >>>> >>>> >>>> On 29 May 2016 at 14:27, Ronald Klop <ronald-lists@klop.ws> wrote: >>>>> >>>>> On Sun, 29 May 2016 19:59:05 +0200, Adrian Chadd >>>>> <adrian.chadd@gmail.com> >>>>> wrote: >>>>> >>>>>> hi, >>>>>> >>>>>> Do ifconfig wlan0 -ht (ie, disable 11n) >>>>>> >>>>>> see if that helps >>>>> >>>>> >>>>> >>>>> Hi, >>>>> >>>>> This does make the errors go away and startup more smoothly. >>>>> >>>>> Regards, >>>>> Ronald. >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> -a >>>>>> >>>>>> >>>>>> On 29 May 2016 at 05:46, Ronald Klop <ronald-lists@klop.ws> wrote: >>>>>>> >>>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> My laptop has troubles obtaining an ip address on the wlan0 >>>>>>> (if_iwn). >>>>>>> The >>>>>>> interface has trouble staying up during dhcp resolving. Below some >>>>>>> information from logs. *If* it obtains an IP address it seems quite >>>>>>> stable >>>>>>> afterwards. >>>>>>> Before >>>>>>> https://svnweb.freebsd.org/base?view=revision&revision=300732 I >>>>>>> had >>>>>>> to reboot a couple of times before it would happen to get an IP >>>>>>> address. >>>>>>> >>>>>>> If I need to supply more information please tell. I'm willing to >>>>>>> test >>>>>>> patches also. >>>>>>> >>>>>>> Regards, >>>>>>> Ronald. >>>>>>> >>>>>>> >>>>>>> From uname -a: >>>>>>> FreeBSD sjakie.klop.ws 11.0-ALPHA1 FreeBSD 11.0-ALPHA1 #7 r300901M: >>>>>>> Sat >>>>>>> May >>>>>>> 28 16:54:00 CEST 2016 >>>>>>> root@sjakie.klop.ws:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 >>>>>>> >>>>>>> From dmesg: >>>>>>> iwn0: <Intel Centrino Advanced 6235> mem 0xf8000000-0xf8001fff irq >>>>>>> 17 >>>>>>> at >>>>>>> device 0.0 on pci2 >>>>>>> >>>>>>> From /etc/rc.conf. >>>>>>> wlans_iwn0="wlan0" >>>>>>> create_args_wlan0="wlanaddr 00:26:b9:12:40:a4 country NL" >>>>>>> ifconfig_wlan0="WPA" >>>>>>> ifconfig_wlan0="$ifconfig_wlan0 SYNCDHCP" >>>>>>> >>>>>>> From console.log: >>>>>>> May 29 13:34:45 sjakie kernel: Created wlan(4) interfaces: wlan0. >>>>>>> May 29 13:34:45 sjakie kernel: Starting wpa_supplicant. >>>>>>> May 29 13:34:45 sjakie kernel: Starting dhclient. >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: no link ... >>>>>>> May 29 13:34:45 sjakie kernel: .. >>>>>>> May 29 13:34:45 sjakie kernel: ... >>>>>>> May 29 13:34:45 sjakie kernel: got link >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 6 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 15 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 4 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 9 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 16 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state up -> down >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 5 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 5 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 11 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0 link state down -> up >>>>>>> May 29 13:34:45 sjakie kernel: DHCPREQUEST on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPDISCOVER on wlan0 to >>>>>>> 255.255.255.255 >>>>>>> port >>>>>>> 67 interval 12 >>>>>>> May 29 13:34:45 sjakie kernel: DHCPACK from 192.168.1.1 >>>>>>> May 29 13:34:45 sjakie kernel: bound to 192.168.1.109 -- renewal in >>>>>>> 2147483647 seconds. >>>>>>> >>>>>>> From messages: >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: Ethernet address: >>>>>>> 00:26:b9:12:40:a4 >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_intr: fatal firmware error >>>>>>> May 29 13:34:45 sjakie kernel: firmware error log: >>>>>>> May 29 13:34:45 sjakie kernel: error type = "UNKNOWN" >>>>>>> (0x00000038) >>>>>>> May 29 13:34:45 sjakie kernel: program counter = 0x00009F64 >>>>>>> May 29 13:34:45 sjakie kernel: source line = 0x000003C4 >>>>>>> May 29 13:34:45 sjakie kernel: error data = 0x0000000000000000 >>>>>>> May 29 13:34:45 sjakie kernel: branch link = 0x00009F6000009F60 >>>>>>> May 29 13:34:45 sjakie kernel: interrupt link = 0x0000DBEA00000000 >>>>>>> May 29 13:34:45 sjakie kernel: time = 54908 >>>>>>> May 29 13:34:45 sjakie kernel: driver status: >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 0: qid=0 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 1: qid=1 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 2: qid=2 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 3: qid=3 cur=2 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 4: qid=4 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 5: qid=5 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 6: qid=6 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 7: qid=7 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 8: qid=8 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 9: qid=9 cur=81 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 10: qid=10 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 11: qid=11 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 12: qid=12 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 13: qid=13 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 14: qid=14 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 15: qid=15 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 16: qid=16 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 17: qid=17 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 18: qid=18 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 19: qid=19 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: rx ring: cur=39 >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_panicked: controller >>>>>>> panicked, >>>>>>> iv_state = 5; restarting >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: scan timeout >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: scan timeout >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_intr: fatal firmware error >>>>>>> May 29 13:34:45 sjakie kernel: firmware error log: >>>>>>> May 29 13:34:45 sjakie kernel: error type = "UNKNOWN" >>>>>>> (0x00000038) >>>>>>> May 29 13:34:45 sjakie kernel: program counter = 0x00009F64 >>>>>>> May 29 13:34:45 sjakie kernel: source line = 0x000003C4 >>>>>>> May 29 13:34:45 sjakie kernel: error data = 0x0000000000000000 >>>>>>> May 29 13:34:45 sjakie kernel: branch link = 0x00009F6000009F60 >>>>>>> May 29 13:34:45 sjakie kernel: interrupt link = 0x0000DBEA00000000 >>>>>>> May 29 13:34:45 sjakie kernel: time = 7464 >>>>>>> May 29 13:34:45 sjakie kernel: driver status: >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 0: qid=0 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 1: qid=1 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 2: qid=2 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 3: qid=3 cur=2 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 4: qid=4 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 5: qid=5 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 6: qid=6 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 7: qid=7 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 8: qid=8 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 9: qid=9 cur=81 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 10: qid=10 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 11: qid=11 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 12: qid=12 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 13: qid=13 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 14: qid=14 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 15: qid=15 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 16: qid=16 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 17: qid=17 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 18: qid=18 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 19: qid=19 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: rx ring: cur=63 >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_panicked: controller >>>>>>> panicked, >>>>>>> iv_state = 5; restarting >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: scan timeout >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_intr: fatal firmware error >>>>>>> May 29 13:34:45 sjakie kernel: firmware error log: >>>>>>> May 29 13:34:45 sjakie kernel: error type = "UNKNOWN" >>>>>>> (0x00000038) >>>>>>> May 29 13:34:45 sjakie kernel: program counter = 0x00009F64 >>>>>>> May 29 13:34:45 sjakie kernel: source line = 0x000003C4 >>>>>>> May 29 13:34:45 sjakie kernel: error data = 0x0000000000000000 >>>>>>> May 29 13:34:45 sjakie kernel: branch link = 0x00009F6000009F60 >>>>>>> May 29 13:34:45 sjakie kernel: interrupt link = 0x0000DBEA00000000 >>>>>>> May 29 13:34:45 sjakie kernel: time = 69923 >>>>>>> May 29 13:34:45 sjakie kernel: driver status: >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 0: qid=0 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 1: qid=1 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 2: qid=2 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 3: qid=3 cur=2 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 4: qid=4 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 5: qid=5 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 6: qid=6 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 7: qid=7 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 8: qid=8 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 9: qid=9 cur=81 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 10: qid=10 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 11: qid=11 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 12: qid=12 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 13: qid=13 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 14: qid=14 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 15: qid=15 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 16: qid=16 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 17: qid=17 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 18: qid=18 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: tx ring 19: qid=19 cur=0 queued=0 >>>>>>> May 29 13:34:45 sjakie kernel: rx ring: cur=61 >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_panicked: controller >>>>>>> panicked, >>>>>>> iv_state = 5; restarting >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to DOWN >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: scan timeout >>>>>>> May 29 13:34:45 sjakie kernel: iwn0: iwn_read_firmware: ucode >>>>>>> rev=0x12a80601 >>>>>>> May 29 13:34:45 sjakie kernel: wlan0: link state changed to UP >>>>>>> _______________________________________________ >>>>>>> freebsd-current@freebsd.org mailing list >>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-current >>>>>>> To unsubscribe, send any mail to >>>>>>> "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.yyo8ois2kndu52>