Date: Sun, 03 Apr 2022 14:51:08 +0000 From: =?utf-8?Q?Daniel_P=C3=A9rez?= <steew0x8@protonmail.com> To: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: rtw88 import to main Message-ID: <zwjIm-gUrntti3G9saVmUXtO3227x5ZVUde3w91_mEX1F2p0L_G_q-Sv-QITLSP_tI9Db2YHiEePS6MSYQ1wyWDL9YMYt4y4B6v4LaoZDqc=@protonmail.com> In-Reply-To: <alpine.BSF.2.00.2204011354440.68830@ai.fobar.qr> References: <alpine.BSF.2.00.2204010010290.68830@ai.fobar.qr> <qoQxbjMX2hcBwdPJ48abFs9YnHryn2convkeaXwU1ez-FeTSvngnn-ReKiwMR-vbgDPjIme2BlWH5JwkGJuWEsM_6G0PPIEg3MM-bv5mQpc=@protonmail.com> <alpine.BSF.2.00.2204011037290.68830@ai.fobar.qr> <3pR-MaUZY3VZEt_9KOXoEnaf9c41r-KGpQBpEeinpK5_EDfdHTnJBuOMdAiKC3AnhPaFr5s9q-yORgnqCLRX3PH3RAUe_D7ZeICHTZsx8AE=@protonmail.com> <alpine.BSF.2.00.2204011354440.68830@ai.fobar.qr>
next in thread | previous in thread | raw e-mail | index | archive | help
Update: after changing my interface settings, I finally got wifi (I had som= e problems with my wpa_supplicant config and the default route). Managed to connect to my dual-band connection in mode 11g, getting around 7= .3Mbps of download speed (which is very acceptable at this state). Wifi seems to be stable, though when performing the speed test, the upload = failed and got this in dmesg: Limiting closed port RST response from 216 to 200 packets/sec And when repeating it I got this message repeated numerous times (above 100= ): rtw880: failed to write TX skb to HCI Still had connection, though. All this was done limiting memory to 4G. Finally seeing some light in the tunnel. ------- Original Message ------- On Friday, April 1st, 2022 at 3:56 PM, Bjoern A. Zeeb <bzeeb-lists@lists.za= bbadoz.net> wrote: > On Fri, 1 Apr 2022, Daniel P=C3=A9rez wrote: > > > Thank you for the hint. Kernel built without an issue. > > As expected, part of the firmware fails to load without the physmem hin= t (7200MB). I tried to boot with physmem set to 4G, firmware loaded and I c= ould attach rtw880 to a new wlan device. > > > Thanks a lot for testing and the feedback. Very helpful to know that > it's same symptoms elsehwere. Much appreciated. > > Did you also try to bring the wlan up when you had liimted memory and > creating wlan0 worked? > > Lots of health, > Bjoern > > -- > Bjoern A. Zeeb r15:7
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?zwjIm-gUrntti3G9saVmUXtO3227x5ZVUde3w91_mEX1F2p0L_G_q-Sv-QITLSP_tI9Db2YHiEePS6MSYQ1wyWDL9YMYt4y4B6v4LaoZDqc=>