Date: Sun, 6 May 2007 14:24:56 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: Igor Popov <igorpopov@newmail.ru>, freebsd-gnats-submit@freebsd.org Subject: Re: usb/112461: ehci USB 2.0 doesn't work on nforce4 Message-ID: <200705061424.56687.hselasky@c2i.net> In-Reply-To: <200705061151.l46Bp4e9013742@www.freebsd.org> References: <200705061151.l46Bp4e9013742@www.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 06 May 2007 13:51, Igor Popov wrote: > >Number: 112461 > >Category: usb > >Synopsis: ehci USB 2.0 doesn't work on nforce4 > >Confidential: no > >Severity: non-critical > >Priority: medium > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Sun May 06 12:00:11 GMT 2007 > >Closed-Date: > >Last-Modified: > >Originator: Igor Popov > >Release: 6.0, 6.1, 6.2 > >Organization: > >Environment: > > FreeBSD unix.my.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 > EET 2007 toor@unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL i386 > > >Description: > > I have motherboard(Asus A8N-E) that built on nforce4 chipset, it has usb > 2.0 ports, but under FreeBSD with usb 2.0 flashdrive max speed near 1.2Mb/s > on file copying (my custom kernel has ehci driver), that is usb1.[01] > speed. But under both linux an windows with the same flashdrive speed is > near 10Mb/s. > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007 > toor@unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL > ACPI APIC Table: <Nvidia AWRDACPI> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 > > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA >,CM OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > Features2=0x1<SSE3> > AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> > AMD Features2=0x1<LAHF> > real memory = 536805376 (511 MB) > avail memory = 507523072 (484 MB) > ioapic0 <Version 1.1> irqs 0-23 on motherboard > wlan: mac acl policy registered > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <Nvidia AWRDACPI> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > nfsmb0: <nForce2/3/4 MCP SMBus Controller> port > 0xe400-0xe41f,0x4c00-0x4c3f,0x4c 40-0x4c7f irq 20 at device 1.1 on pci0 > smbus0: <System Management Bus> on nfsmb0 > smb0: <SMBus generic I/O> on smbus0 > nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 > smbus1: <System Management Bus> on nfsmb1 > smb1: <SMBus generic I/O> on smbus1 > ohci0: <OHCI (generic) USB controller> mem 0xd3104000-0xd3104fff irq 21 at > devic e 2.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 > at d evice 2.1 on pci0 > ehci0: [GIANT-LOCKED] > usb1: EHCI version 1.0 > usb1: companion controller, 4 ports each: usb0 > usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem > 0xd3103000-0xd3103ff f irq 23 at device 4.0 on pci0 > pcm0: <Avance Logic ALC850 AC97 Codec> > atapci0: <nVidia nForce CK804 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0 x177,0x376,0xf000-0xf00f at device 6.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <nVidia nForce CK804 SATA300 controller> port > 0x9f0-0x9f7,0xbf0-0xbf3,0 x970-0x977,0xb70-0xb73,0xd800-0xd80f mem > 0xd3102000-0xd3102fff irq 21 at device 7.0 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > atapci2: <nVidia nForce CK804 SATA300 controller> port > 0x9e0-0x9e7,0xbe0-0xbe3,0 x960-0x967,0xb60-0xb63,0xc400-0xc40f mem > 0xd3101000-0xd3101fff irq 22 at device 8.0 on pci0 > ata4: <ATA channel 0> on atapci2 > ata5: <ATA channel 1> on atapci2 > pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 > pci5: <ACPI PCI bus> on pcib1 > ath0: <Atheros 5212> mem 0xd3000000-0xd300ffff irq 16 at device 6.0 on pci5 > ath0: Ethernet address: 00:15:e9:a4:58:9b > ath0: mac 7.9 phy 4.5 radio 5.6 > nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xb000-0xb007 mem > 0xd3 100000-0xd3100fff irq 23 at device 10.0 on pci0 > miibus0: <MII bus> on nfe0 > e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto nfe0: Ethernet address: 00:17:31:13:8d:3f > nfe0: [FAST] > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci4: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci2: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 > pci1: <ACPI PCI bus> on pcib5 > nvidia0: <GeForce 7900 GT/GTO> port 0xa000-0xa07f mem > 0xd0000000-0xd0ffffff,0xc0 000000-0xcfffffff,0xd1000000-0xd1ffffff irq 18 > at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 sio0: type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1809282513 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-master UDMA100 > acd0: DVDR <ASUS DRW-1608P/1.59> at ata1-master UDMA66 > ad1: 190782MB <Seagate ST3200822AS 3.01> at ata5-master SATA150 > Trying to mount root from ufs:/dev/ad0s2a > ath0: link state changed to UP > nfe0: link state changed to UP > umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C) > This is maybe a SCSI problem. If you install the new USB stack [the SVN version], see: http://www.turbocat.net/~hselasky/usb4bsd Then try to copy some files and turn on debugging: sysctl hw.usb.umass.debug=-1 You might get a lot of messages. Look for errors. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705061424.56687.hselasky>