Date: Fri, 30 Aug 2002 18:15:31 +0200 From: Paul Everlund <tdv94ped@cs.umu.se> To: Vasily <admin@arfatur.ru> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: netgraph problem Message-ID: <3D6F9A23.9138D6BC@cs.umu.se> References: <4087581973.20020830184400@arfatur.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Vasily wrote:
>
> Hi ALL,
>
> I've tried to organize connection via ADSL modem using PPPoE (PPP
> over Ethernet). According to instructions I included in KERNEL
> options NETGRAPH
> After compilation I tried
> ---------------------------------
> #/usr/sbin/ppp
> Working in interactive mode
> Using interface: tun0
> ppp ON myhost>
> ---------------------------------
> then
> ---------------------------------
> ppp ON myhost> dial
> module_register: module netgraph already exists!
> linker_file_sysinit "netgraph.ko" failed to register! 17
[cut]
My first guess would be, that if you run kldstat, you will
see that netgraph.ko is present. Also you have it compiled
explicitly in the kernel, and therefore they clash.
Disable netgraph.ko, loaded as a module at startup.
My own kernel config file, network part, looks as this, if
it is of any help (you should make changes where appropriate):
#-------------
#- Networking
#-------------
options INET #InterNETworking
options ICMP_BANDLIM #Rate limit bad replies
options IPFIREWALL #Firewall
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=50
options IPDIVERT #Divert sockets
#options TCP_DROP_SYNFIN #Disabled if running a web-
server.
# Enable PPPoE
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_SOCKET
options NETGRAPH_PPPOE
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device miibus
device ed0 at isa? port 0x300 irq 10 iomem 0xd8000
device ed1 at isa? port 0x320 irq 11 iomem 0xd8000
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop #Network loopback device
pseudo-device ether #Generic Ethernet
pseudo-device tun #Tunnel driver (PPPoE)
pseudo-device bpf #Berkeley packet filter
This works with FreeBSD 4.6-p1, ADSL and a PPPoE modem.
Good luck!
Best regards,
Paul
>
> --
> Best regards,
>
> Vasily
> admin@arfatur.ru
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D6F9A23.9138D6BC>