Date: Thu, 22 Jan 2004 23:59:50 -0600 From: Matt Reinhart <matt@antitheoretical.org> To: freebsd-questions@freebsd.org Subject: Trouble booting 4.9 on Compaq DL360 Message-ID: <20040123055950.GA8431@virtue.antitheoretical.org>
next in thread | raw e-mail | index | archive | help
Hello,
I recently did a standard ("Developer", no X) install of 4.9-RELEASE
on a Compaq Proliant DL360. Everything went smoothly.
After the install finished copying files, I tried installing a standard
MBR, but when it didn't work I assumed I made a mistake and tried the
same install again with BootMgr. After the second errorless installation,
I rebooted and removed the CD from the drive.
Upon reboot, the boot manager and its familiar F1 prompt shows on the
screen. However, when it tries to continue I receive the following
message: "Error Booting System Partition". (This is the same error I
received without BootMgr.) I googled for this message to no avail.
At this point, I rebooted the system from the install cd. At the boot
prompt, I entered the following:
unload
set currdev=disk2s1a
load /kernel
The system then booted with the configuration I had set during the
install process and is still up-and-running (but cannot be rebooted
without user-intervention).
I have tried `disklabel -B -b /boot/boot0` to restore the MBR, but I
still receive the same message ("Error Booting System Partition")
following the initial bootloader screen.
Does anyone have an idea of what is happening?
-Matt
If it's of any help, here's the output from dmesg(8):
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1263.45-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 4060069888 (3964912K bytes)
avail memory = 3953598464 (3860936K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xf5000000-0xf5ffffff,0xf6000000-0xf6ffffff irq 3 at device 1.0 on pci0
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 34727MB (71122560 sectors), blocksize=512
pci0: <ATI Mach64-GV graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2800-0x280f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem 0xf7e00000-0xf7efffff,0xf7fff000-0xf7ffffff irq 5 at device 4.0 on pci3
fxp0: Ethernet address 00:02:a5:e9:69:f4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xf7c00000-0xf7cfffff,0xf7dff000-0xf7dfffff irq 7 at device 5.0 on pci3
fxp1: Ethernet address 00:02:a5:e9:69:f3
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559 Pro/100 Ethernet> port 0x3080-0x30bf mem 0xf7a00000-0xf7afffff,0xf7bff000-0xf7bfffff irq 10 at device 6.0 on pci3
fxp2: Ethernet address 00:d0:b7:df:11:0c
inphy2: <i82555 10/100 media interface> on miibus2
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0685 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xe8000-0xedfff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
acd0: CDROM <CRN-8245B> at ata1-master PIO4
Mounting root from ufs:/dev/idad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040123055950.GA8431>