Date: Sun, 29 Jun 2014 18:53:16 +0000 (UTC) From: Sean Bruno <sbruno@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r268018 - head/sys/dev/ciss Message-ID: <201406291853.s5TIrGuc076807@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: sbruno Date: Sun Jun 29 18:53:15 2014 New Revision: 268018 URL: http://svnweb.freebsd.org/changeset/base/268018 Log: Add detection for ciss(4) controllers that are set to non-raid JBOD mode. If a controller is set to JBOD, it has no RAID functions turned on. Populate even more of the firmware specification headers, copied from cciss_vol_status. Reviewed by: Benesh, Scott <scott.benesh@hp.com> MFC after: 2 weeks Modified: head/sys/dev/ciss/ciss.c head/sys/dev/ciss/cissreg.h Modified: head/sys/dev/ciss/ciss.c ============================================================================== --- head/sys/dev/ciss/ciss.c Sun Jun 29 18:38:44 2014 (r268017) +++ head/sys/dev/ciss/ciss.c Sun Jun 29 18:53:15 2014 (r268018) @@ -1220,7 +1220,7 @@ ciss_identify_adapter(struct ciss_softc } /* sanity-check reply */ - if (!sc->ciss_id->big_map_supported) { + if (!(sc->ciss_id->controller_flags & CONTROLLER_FLAGS_BIG_MAP_SUPPORT)) { ciss_printf(sc, "adapter does not support BIG_MAP\n"); error = ENXIO; goto out; @@ -1250,7 +1250,7 @@ ciss_identify_adapter(struct ciss_softc sc->ciss_id->configured_logical_drives, (sc->ciss_id->configured_logical_drives == 1) ? "" : "s"); ciss_printf(sc, " firmware %4.4s\n", sc->ciss_id->running_firmware_revision); - ciss_printf(sc, " %d SCSI channels\n", sc->ciss_id->scsi_bus_count); + ciss_printf(sc, " %d SCSI channels\n", sc->ciss_id->scsi_chip_count); ciss_printf(sc, " signature '%.4s'\n", sc->ciss_cfg->signature); ciss_printf(sc, " valence %d\n", sc->ciss_cfg->valence); @@ -1274,6 +1274,10 @@ ciss_identify_adapter(struct ciss_softc ciss_printf(sc, " max logical logical volumes: %d\n", sc->ciss_cfg->max_logical_supported); ciss_printf(sc, " max physical disks supported: %d\n", sc->ciss_cfg->max_physical_supported); ciss_printf(sc, " max physical disks per logical volume: %d\n", sc->ciss_cfg->max_physical_per_logical); + ciss_printf(sc, " JBOD Support is %s\n", (sc->ciss_id->uiYetMoreControllerFlags & YMORE_CONTROLLER_FLAGS_JBOD_SUPPORTED) ? + "Available" : "Unavailable"); + ciss_printf(sc, " JBOD Mode is %s\n", (sc->ciss_id->PowerUPNvramFlags & PWR_UP_FLAG_JBOD_ENABLED) ? + "Enabled" : "Disabled"); } out: @@ -3387,25 +3391,28 @@ ciss_cam_complete_fixup(struct ciss_soft bus = cam_sim_bus(xpt_path_sim(csio->ccb_h.path)); /* - * Don't let hard drives be seen by the DA driver. They will still be - * attached by the PASS driver. + * If the controller is in JBOD mode, there are no logical volumes. + * Let the disks be probed and dealt with via CAM. Else, mask off + * the physical disks and setup the parts of the inq structure for + * the logical volume. swb */ - if (CISS_IS_PHYSICAL(bus)) { - if (SID_TYPE(inq) == T_DIRECT) - inq->device = (inq->device & 0xe0) | T_NODEVICE; - return; + if( !(sc->ciss_id->PowerUPNvramFlags & PWR_UP_FLAG_JBOD_ENABLED)){ + if (CISS_IS_PHYSICAL(bus)) { + if (SID_TYPE(inq) == T_DIRECT) + inq->device = (inq->device & 0xe0) | T_NODEVICE; + return; + } + cl = &sc->ciss_logical[bus][target]; + + padstr(inq->vendor, "HP", + SID_VENDOR_SIZE); + padstr(inq->product, + ciss_name_ldrive_org(cl->cl_ldrive->fault_tolerance), + SID_PRODUCT_SIZE); + padstr(inq->revision, + ciss_name_ldrive_status(cl->cl_lstatus->status), + SID_REVISION_SIZE); } - - cl = &sc->ciss_logical[bus][target]; - - padstr(inq->vendor, "HP", - SID_VENDOR_SIZE); - padstr(inq->product, - ciss_name_ldrive_org(cl->cl_ldrive->fault_tolerance), - SID_PRODUCT_SIZE); - padstr(inq->revision, - ciss_name_ldrive_status(cl->cl_lstatus->status), - SID_REVISION_SIZE); } } Modified: head/sys/dev/ciss/cissreg.h ============================================================================== --- head/sys/dev/ciss/cissreg.h Sun Jun 29 18:38:44 2014 (r268017) +++ head/sys/dev/ciss/cissreg.h Sun Jun 29 18:53:15 2014 (r268018) @@ -615,26 +615,124 @@ struct ciss_bmic_id_table { char running_firmware_revision[4]; char stored_firmware_revision[4]; u_int8_t hardware_revision; - u_int8_t res1[4]; + u_int8_t boot_block_revision[4]; u_int32_t deprecated_drive_present_map; u_int32_t deprecated_external_drive_present_map; u_int32_t board_id; - u_int8_t res2; + u_int8_t swapped_error_cable; u_int32_t deprecated_non_disk_map; - u_int8_t res3[5]; + u_int8_t bad_host_ram_addr; + u_int8_t cpu_revision; + u_int8_t res3[3]; char marketting_revision; - u_int8_t res4:3; - u_int8_t more_than_seven_supported:1; - u_int8_t res5:3; - u_int8_t big_map_supported:1; /* must be set! */ - u_int8_t res6[2]; - u_int8_t scsi_bus_count; - u_int32_t res7; + u_int8_t controller_flags; +#define CONTROLLER_FLAGS_FLASH_ROM_INSTALLED 0x01 +#define CONTROLLER_FLAGS_DIAGS_MODE_BIT 0x02 +#define CONTROLLER_FLAGS_EXPAND_32MB_FX 0x04 +#define CONTROLLER_FLAGS_MORE_THAN_7_SUPPORT 0x08 +#define CONTROLLER_FLAGS_DAISY_SUPPORT_BIT 0x10 +#define CONTROLLER_FLAGS_RES6 0x20 +#define CONTROLLER_FLAGS_RES7 0x40 +#define CONTROLLER_FLAGS_BIG_MAP_SUPPORT 0x80 + u_int8_t host_flags; +#define HOST_FLAGS_SDB_ASIC_WORK_AROUND 0x01 +#define HOST_FLAGS_PCI_DATA_BUS_PARITY_SUPPORT 0x02 +#define HOST_FLAGS_RES3 0x04 +#define HOST_FLAGS_RES4 0x08 +#define HOST_FLAGS_RES5 0x10 +#define HOST_FLAGS_RES6 0x20 +#define HOST_FLAGS_RES7 0x30 +#define HOST_FLAGS_RES8 0x40 + u_int8_t expand_disable_code; +#define EXPAND_DISABLE_NOT_NEEDED 0x01 +#define EXPAND_DISABLE_MISSING_CACHE_BOARD 0x02 +#define EXPAND_DISABLE_WCXC_FATAL_CACHE_BITS 0x04 +#define EXPAND_DISABLE_CACHE_PERM_DISABLED 0x08 +#define EXPAND_DISABLE_RAM_ALLOCATION_FAILED 0x10 +#define EXPAND_DISABLE_BATTEREIS_DISCHARGED 0x20 +#define EXPAND_DISABLE_RES7 0x40 +#define EXPAND_DISABLE_REBUILD_RUNNING 0x80 + u_int8_t scsi_chip_count; + u_int32_t maximum_blocks; u_int32_t controller_clock; u_int8_t drives_per_scsi_bus; u_int8_t big_drive_present_map[CISS_BIG_MAP_ENTRIES / 8]; u_int8_t big_external_drive_present_map[CISS_BIG_MAP_ENTRIES / 8]; u_int8_t big_non_disk_map[CISS_BIG_MAP_ENTRIES / 8]; + + u_int16_t task_flags; /* used for FW debugging */ + u_int8_t ICL_bus_map; /* Bitmap used for ICL between controllers */ + u_int8_t redund_ctlr_modes_support; /* See REDUNDANT MODE VALUES */ + u_int8_t curr_redund_ctlr_mode; + u_int8_t redund_ctlr_status; + u_int8_t redund_op_failure_code; + + u_int8_t unsupported_nile_bus; + u_int8_t host_i2c_autorev; + u_int8_t cpld_revision; + u_int8_t fibre_chip_count; + u_int8_t daughterboard_type; + u_int8_t more_swapped_config_cable_error; + + u_int8_t license_key_status; + u_int8_t access_module_status; + u_int8_t features_supported[12]; + u_int8_t rec_rom_inact_rev[4]; /* Recovery ROM inactive f/w revision */ + u_int8_t rec_rom_act_status; /* Recovery ROM flags */ + u_int8_t pci_to_pci_status; /* PCI to PCI bridge status */ + u_int32_t redundant_server_info; /* Reserved for future use */ + u_int8_t percent_write_cache; /* Percent of memory allocated to write cache */ + u_int16_t daughterboard_size_mb; /* Total size (MB) of cache board */ + u_int8_t cache_batter_count; /* Number of cache batteries */ + u_int16_t total_controller_mem_mb; /* Total size (MB) of atttached memory */ + u_int8_t more_controller_flags; /* Additional controller flags byte */ + u_int8_t x_board_host_i2c_rev; /* 2nd byte of 3 byte autorev field */ + u_int8_t battery_pic_rev; /* BBWC PIC revision */ +/* + * Below here I have no documentation on the rest of this data structure. It is + * inferred from the opensource cciss_vol_status application. I assume that this + * data strucutre is 512 bytes in total size, do not exceed it. + */ + u_int8_t bDdffVersion[4]; /* DDFF update engine version */ + u_int16_t usMaxLogicalUnits; /* Maximum logical units supported */ + u_int16_t usExtLogicalUnitCount; /* Big num configured logical units */ + u_int16_t usMaxPhysicalDevices; /* Maximum physical devices supported */ + u_int16_t usMaxPhyDrvPerLogicalUnit; /* Max physical drive per logical unit */ + u_int8_t bEnclosureCount; /* Number of attached enclosures */ + u_int8_t bExpanderCount; /* Number of expanders detected */ + u_int16_t usOffsetToEDPbitmap; /* Offset to extended drive present map*/ + u_int16_t usOffsetToEEDPbitmap; /* Offset to extended external drive present map */ + u_int16_t usOffsetToENDbitmap; /* Offset to extended non-disk map */ + u_int8_t bInternalPortStatus[8]; /* Internal port status bytes */ + u_int8_t bExternalPortStatus[8]; /* External port status bytes */ + u_int32_t uiYetMoreControllerFlags;/* Yet More Controller flags */ +#define YMORE_CONTROLLER_FLAGS_JBOD_SUPPORTED \ + ( 1 << 25 ) /* Controller has JBOD support */ + + u_int8_t bLastLockup; /* Last lockup code */ + u_int8_t bSlot; /* PCI slot according to option ROM*/ + u_int16_t usBuildNum; /* Build number */ + u_int32_t uiMaxSafeFullStripeSize; /* Maximum safe full stripe size */ + u_int32_t uiTotalLength; /* Total structure length */ + u_int8_t bVendorID[8]; /* Vendor ID */ + u_int8_t bProductID[16]; /* Product ID */ +/* + * These are even more obscure as they seem to only be available in cciss_vol_status + */ + u_int32_t ExtendedLastLockupCode; + u_int16_t MaxRaid; + u_int16_t MaxParity; + u_int16_t MaxADGStripSize; + u_int16_t YetMoreSwappedCables; + u_int8_t MaxDevicePaths; + u_int8_t PowerUPNvramFlags; +#define PWR_UP_FLAG_JBOD_ENABLED 0x08 /*JBOD mode is enabled, all RAID features off */ + + u_int16_t ZonedOffset; + u_int32_t FixedFieldsLength; + u_int8_t FWCompileTimeStamp[24]; + u_int32_t EvenMoreControllerFlags; + u_int8_t padding[240]; } __packed; /* CISS_BMIC_ID_PDRIVE */
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201406291853.s5TIrGuc076807>