Date: Mon, 30 Aug 2004 20:34:06 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: Konstantin Saurbier <saurbier@mathematik.uni-bielefeld.de>, ticso@freebsd.org Cc: alpha@freebsd.org Subject: Re: 5.3-BETA1 on ES40 (go) and AS1200 (no go) Message-ID: <20040830183406.GD52318@freebie.xs4all.nl> In-Reply-To: <20040830174643.GA3619@mathematik.uni-bielefeld.de> References: <20040824183019.GA82339@freebie.xs4all.nl> <20040826154743.GC15146@mathematik.uni-bielefeld.de> <20040830174643.GA3619@mathematik.uni-bielefeld.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 30, 2004 at 07:46:43PM +0200, Konstantin Saurbier wrote.. > Hi Wilko, > > Konstantin Saurbier wrote on Thu Aug 26, 2004 um 05:47:43PM: > > Tests on AS1200, AS255 and a DS10 will follow in the next few days. > > I have attached the boot message, the output from srm show config and > show device for the ES40. No Problems so far. You can add the ES40 in > dual cpu configuration to your list. Oh yes the the errors with the da2 > disc are no FreeBSD problems, seems to be a faulty disc. Thanks for that. > I suggest to add the em driver (for Intel gigabit ethernet cards) to > the GENERIC kernel. Hm, yes, I had some em cards running on both -current and RELENG_5, so this sounds like a reasonable idea. > The AS1200 doesn't boot, boot message and srm show config and show > device are also attached. Well, boot it does, but it appears to get stuck in the SCSI probes. Have you tried with the RAIDarray3000 disconnected (the HSZ22 device is a raidbox). Bernd, AS1200 is close to your AS4100, have you seen something similar? > sio0: port may not be enabled > sio0: irq maps: 0 0 0 0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio0: interrupting at ISA irq 4 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0 0 0 0 > sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 > sio1: type 16550A > sio1: interrupting at ISA irq 3 > vga0: <Generic ISA VGA> failed to probe on isa0 > isa_probe_children: probing PnP devices > procfs registered > Timecounter "i8254" frequency 1193182 Hz quality 0 > Timecounters tick every 0.833 msec > lo0: bpf attached > Waiting 15 seconds for SCSI devices to settle > (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. > (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. > sym1: enabling clock multiplier > sym1: Downloading SCSI SCRIPTS. > isp0: driver initiated bus reset of bus 0 > md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c63d8 > GEOM: Configure md0a, start 8192 length 4415488 end 4423679 > GEOM: Configure md0c, start 0 length 4423680 end 4423679 > de0: enabling Full Duplex 100baseTX port > (probe5:sym0:0:5:0): Retrying Command > (probe5:sym0:0:5:0): error 22 > (probe5:sym0:0:5:0): Unretryable Error > (probe22:isp0:0:0:0): Retrying Command > (probe0:isp0:0:0:1): Retrying Command > (probe0:isp0:0:0:2): Retrying Command -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040830183406.GD52318>