Date: Thu, 25 Jan 2001 21:23:24 -0700 From: "Simon \"Hagar\" Maycock" <hagar@inficad.com> To: "'Doug Young'" <dougy@bryden.apana.org.au>, <freebsd-questions@FreeBSD.ORG> Subject: RE: UsePPP configuration. Message-ID: <000401c0874f$c18c56e0$0100a8c0@george> In-Reply-To: <00d601c08741$f76ccaa0$847e03cb@apana.org.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug, Thanks for the suggestion, but alas no luck. I used the ppp_script just to see what it did. It appears just to have taken out some of the set statements I dragged of the internet over the course of the day!!! I nolonger get the Chat script error, but still only get a 15s connect and no functionality. I have taken the libity of attaching the new files so if you have any good ideas, please feel free to make suggestions...I am going out of my mind with frustation!!! I have read so much, purchased the Walnut Creek book and still no joy. I am sure this is just a script problem as I can connect manually no problem as follows... charlie# ppp ASU Working in interactive mode Using interface: tun0 Warning: Carrier: Invalid log value Warning: Usage: set log [local] [+|-]async|cbcp|ccp|chat|command|connect|debug|dns|hdlc|id0|ipcp|lcp |lqm|phase|physical|sync|tcp/ip|timer|tun... ppp ON charlie> term deflink: Entering terminal mode on /dev/cuaa0 Type `~?' for help atdt7270030 CONNECT 28800/ARQ/V34/LAPM/V42BIS *** I HAVE TO PRESS RETURN HERE TO GET USERNAME PROMPT: **** User Access Verification Username: mrhagar Password: AS5100F>ping general.asu.edu Translating "general.asu.edu"...domain server (129.219.17.5) [OK] Translating "general.asu.edu"...domain server (129.219.17.5) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 129.219.10.243, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/7/20 ms AS5100F> BUT using the scripts below................... Before I "dial" only the CS light is on, on the modem (USR 56K Ext Sportster). When I "dial" the TR light comes on. For about 30s the RX TX lights flicker and eventually the CD lights. After another 30s I hear the line drop and only the CS remains lit. All I see is charlie# ppp ASU Working in interactive mode Using interface: tun0 Warning: Carrier: Invalid log value Warning: Usage: set log [local] [+|-]async|cbcp|ccp|chat|command|connect|debug|dns|hdlc|id0|ipcp|lcp |lqm|phase|physical|sync|tcp/ip|timer|tun... ppp ON charlie> dial ppp ON charlie> Should there be a connected message or something? Script generated ppp.conf with gin: changed to name: (Username:) default: set log Phase Chat Connect Carrier lcp ipcp ccp command set device /dev/cuaa0 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNE CT" ASU: set phone "7270030" #Separate multiple phone numbers with a | set login "TIMEOUT 10 name:-BREAK-name: mrhagar word: XXXYYY" set timeout 300 #Change to 0 if no timeout desired deny lqr set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 charlie# cat host.conf hosts bind charlie# cat hosts 127.0.0.1 localhost 10.0.0.1 charlie.mrhagar.com charlie charlie# cat resolv.conf nameserver 129.219.13.81 nameserver 129.219.17.200 domain mrhagar.com charlie# cat rc.conf # This file now contains just the overrides from /etc/defaults/rc.conf # please make all changes to this file. # -- sysinstall generated deltas -- # ifconfig_fxp0="inet 192.168.0.201 netmask 255.255.255.0" hostname="charlie.mrhagar.com" linux_enable="YES" moused_enable="YES" defaultrouter="" nfs_server_enable="YES" ntpdate_flags="clock.llnl.gov" ntpdate_enable="YES" gateway_enable="YES" charlie# cat ppp.linkup MYADDR: delete ALL add 0 0 HISADDR charlie# netstat -nr Routing tables Internet: Destination Gateway Flags Netif Expire 127.0.0.1 127.0.0.1 UH 1 26 lo0 192.168 link#1 UC 0 0 fxp0 => 192.168.0.1 0:d0:b7:c0:f5:4b UHLW 2 659 fxp0 1066 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%fxp0/64 link#1 UC fxp0 fe80::%lo0/64 fe80::1%lo0 Uc lo0 fe80::%tun0/64 link#11 UC tun0 fe80::2a0:c9ff:fe42:ee9a%tun0 ::1 UH lo0 ff01::/32 ::1 U lo0 ff02::%fxp0/32 link#1 UC fxp0 ff02::%lo0/32 fe80::1%lo0 UC lo0 ff02::%tun0/32 link#11 UC tun0 Any help will be most helpful...otherwise it is back to RH LInux. Simon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000401c0874f$c18c56e0$0100a8c0>