Date: Tue, 1 Nov 2011 11:01:35 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Andrey Smagin <samspeed@mail.ru> Cc: freebsd-net@freebsd.org Subject: Re: PCI-E VT6130 NIC (if_vge) hang system with gigabit link Message-ID: <20111101180135.GD6914@michelle.cdnetworks.com> In-Reply-To: <E1RKnhN-0003rb-00.samspeed-mail-ru@f283.mail.ru> References: <E1RIaki-0002pq-00.samspeed-mail-ru@f197.mail.ru> <E1RK1v8-0006v8-00.samspeed-mail-ru@f193.mail.ru> <20111031005519.GC1679@michelle.cdnetworks.com> <E1RKnhN-0003rb-00.samspeed-mail-ru@f283.mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Oct 31, 2011 at 12:58:29PM +0400, Andrey Smagin wrote: > > > > 31 октября 2011, 04:56 от YongHyeon PYUN <pyunyh@gmail.com>: > > On Sat, Oct 29, 2011 at 09:57:30AM +0400, Andrey Smagin wrote: > > > > > > Ok. With autonegotiation ifconfig show speed 100MBit. > > > > And vge(4) work without problems with the resolved speed/duplex > > of auto-negotiation? > > > > > with manual 1000baseT full-duplex settings in dmesg: > > > vge0: failed to start MII autopoll > > > vge0: MII read timed out > > > vge0: failed to start MII autopoll > > > vge0: link state changed to UP > > > vge0: MII read timed out > > > > [...] > > > > Did vge(4) ever work with 1000baseT on your box? > Hm... I never seen 1000baseT with vge on this box because > it have only FreeBSD. > > And why you have to manually configure 1000baseT link? > With autonegatiation link stand on 100Mbit full-duplex > > Does link partner(switch) also use auto-negotiation? > In box also present Intel if_em gigabit and if_nfe gigabit card wich work with > same cable and partner(switch) at gigabit speed. I only switch connector to if_vge socket. > > > I should have been more clearer. I wanted to know which previous FreeBSD release was able to establish a 1000baseT link. Downshifting feature of IC Plus IP1001 PHY is automatically enabled which will downshift to 100TX link when 1000baseT link establishment fails in auto-negotiation process. So can you confirm there is no cabling issues there?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20111101180135.GD6914>