Date: Sun, 14 Jun 98 18:43:21 +0200 From: Ben Stuyts <benst@terminus.stuyts.nl> To: current@FreeBSD.ORG Subject: Trouble with burning cd's on FreeBSD-current. Message-ID: <199806141643.SAA19068@daneel.stuyts.nl>
next in thread | raw e-mail | index | archive | help
Hello,
I am no longer able to burn cd's on my FreeBSD current system. I noticed some
mails about this on the mailing list recently, but they didn't help.
The worm is a Philips CDD2600. The system uses an on-board Adaptec 7880 chip
(Gigabyte 586 DX motherboard).
This is on a freshly cvsupped system. Using the burncd script fails with
errors like:
Jun 12 01:16:04 terminus /kernel: worm0: ABORTED COMMAND asc:ad,0 Vendor
Specific ASC
Jun 12 01:16:04 terminus /kernel: worm0: ABORTED COMMAND info:0x80000026
asc:ad,0 Vendor Specific ASC
or:
Jun 12 02:01:59 terminus /kernel: worm0: MEDIUM ERROR asc:34,0
Jun 12 02:01:59 terminus /kernel: worm0: MEDIUM ERROR info:0x80000082 asc:34,0
After browsing the -current mailing list I tried to use the cdrecord package
from the 2.2.6-Stable CD. This also gives problems:
terminus# rtprio 5 cdrecord -v speed=2 dev=5,0 benst.raw
Cdrecord release 1.6a12 Copyright (C) 1995-1998 Jurg Schilling
TOC Type: 1 = CD-ROM
scsidev: '5,0'
scsibus: 0 target: 5 lun: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identifikation : 'CDD2600 '
Revision : '1.06'
Device seems to be: Philips CDD2600.
Using driver for Philips CDD-522 (philips_cdd522).
Driver flags :
Track 01: data 470 MB
Total size: 540 MB (53:35.30) = 241148 sectors
Lout start: 541 MB (53:37/23) = 241148 sectors
ATIP start of lead in: -11595 (97:27/30)
cdrecord: Undefined error: 0. read toc: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 80 00 00 0E 0A 00 00 00 00 81 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x81 Qual 0x00 (illegal track number) Fru 0x0
Sense flags: Blk -2147483634 (valid)
resid: 12
cmd finished after 0.006s timeout 40s
cdrecord: Cannot read TOC
Disk type: Cyanine, AZO or similar
Manufacturer: Pioneer Video Corporation
cdrecord: Cannot read TOC
Starting to write CD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input-buffer ... input-buffer ready.
Starting new track at sector: 0
Track 01: 470 of 470 MB written (fifo 100%).
Track 01: Total bytes read/written: 493867008/493867008 (241146 sectors).
cdrecord: Undefined error: 0. flush cache: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 80 00 00 82 0A 00 00 00 00 34 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x34 Qual 0x00 (absorbtion control error) Fru 0x0
Sense flags: Blk -2147483518 (valid)
cmd finished after 7.324s timeout 120s
Writing time: 1617.613s
Fixating...
cdrecord: Undefined error: 0. fixation: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 04 80 00 02 8B 0A 00 00 00 00 44 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
Sense flags: Blk -2147482997 (valid)
cmd finished after 83.703s timeout 480s
Fixating time: 83.704s
cdrecord: fifo had 8613 puts and 8613 gets.
cdrecord: fifo was 0 times empty and 8501 times full, min fill was 94%.
Here is the output of dmesg:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Fri Jun 12 23:25:50 MET DST 1998
benst@terminus.stuyts.nl:/usr/source/src/sys/compile/TERMINUS-NOSMP
Timecounter "i8254" frequency 1193182 Hz cost 2298 ns
Timecounter "TSC" frequency 167046167 Hz cost 137 ns
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62758912 (61288K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 15 on pci0.9.0
de0: SMC 21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:1f:54:e8
vga0: <S3 ViRGE VX graphics accelerator> rev 0x02 int a irq 11 on pci0.10.0
ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 9 on pci0.12.0
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 1 Tagged Queuing Device
sd0 at scbus0 target 1 lun 0
sd0: <IBM DCAS-34330W S61A> type 0 fixed SCSI 2
sd0: Direct-Access 4134MB (8467200 512 byte sectors)
sd0: with 8205 cyls, 6 heads, and an average 171 sectors/track
sd1 at scbus0 target 3 lun 0
sd1: <QUANTUM TRB850S 0404> type 0 fixed SCSI 2
sd1: Direct-Access 810MB (1660299 512 byte sectors)
sd1: with 3653 cyls, 4 heads, and an average 113 sectors/track
cd0 at scbus0 target 4 lun 0
cd0: <MATSHITA CD-ROM CR-506 8S05> type 5 removable SCSI 2
cd0: CD-ROM can't get the size
worm0 at scbus0 target 5 lun 0
worm0: <PHILIPS CDD2600 1.06> type 5 removable SCSI 2
worm0: Write-Once
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM2110A>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at ? drq 5 on isa
snd0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
Intel Pentium F00F detected, installing workaround
changing root device to sd0s1a
de0: promiscuous mode enabled
As burning cd's is my way of backup, I really need to get this to work. Any
help much appreciated.
A related question: Is burning cd's possible (and reliable) with -stable? I
am considering building a -stable system for use as a server, and keep this
system for the fun -current part.
Thanks,
Ben
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806141643.SAA19068>