Date: Mon, 18 Dec 2000 17:39:28 -0600 From: "David W. Chapman Jr." <dwcjr@inethouston.net> To: "stable" <stable@FreeBSD.ORG> Subject: DMA33 ATAPI CDROM and 4.2-STABLE Message-ID: <015d01c0694b$c34952c0$931576d8@inethouston.net>
next in thread | raw e-mail | index | archive | help
I'm running 4.2-stable
FreeBSD leviathan.inethouston.com 4.2-STABLE FreeBSD 4.2-STABLE #1: Mon Dec
18 10:09:41 CST 2000 poseiden@leviathan.in
ethouston.com:/usr/src/sys/compile/LEVIATHAN i386
and I get this in my dmesg
acd0: CDROM <TAEIL CDD-7400A> at ata3-master using PIO4
the promise ultra/66 bios tells me that it does dma/33 and so does the box
that I bought it on. It is slaved off of my dma/66 harddrive with freebsd
detects as 66 and I'm using the correct cable, any suggestions? Here's my
full dmesg...atapci0 is my onboard ide controller for my abit tx5, not sure
why it gives me the error it does on that controller, but it doesn't matter
as I use the promise ultra/66 controller. I don't think I'd notice the
performance increase much, but if this is a bug, I wouldn't mind getting it
fixed if anyone has some free time to help me.
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #1: Mon Dec 18 10:09:41 CST 2000
poseiden@leviathan.inethouston.com:/usr/src/sys/compile/LEVIATHAN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 300682828 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 128176128 (125172K bytes)
Preloaded elf kernel "kernel" at 0xc0283000.
Preloaded elf module "if_xl.ko" at 0xc028309c.
Preloaded elf module "miibus.ko" at 0xc028313c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: Busmastering DMA not supported
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6800-0x687f mem
0xe2020000-0xe202007f irq 11 at device 9.0 on pci0
xl0: Ethernet address: 00:50:04:d9:bd:72
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 11.0 irq 14
atapci1: <Promise ATA66 controller> port
0x7c00-0x7c3f,0x7800-0x7803,0x7400-0x7407,0x7000-0x7003,0x6c00-0x6c07 mem
0xe2000
000-0xe201ffff irq 15 at device 15.0 on pci0
ata2: at 0x6c00 on atapci1
ata3: at 0x7400 on atapci1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 16603MB <Maxtor 91741U4> [33735/16/63] at ata2-master UDMA66
acd0: CDROM <TAEIL CDD-7400A> at ata3-master using PIO4
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?015d01c0694b$c34952c0$931576d8>