Date: Thu, 23 Feb 2012 21:09:14 +0700 From: Nugroho Atmotaruno <atmotaruno@gmail.com> To: freebsd-net@freebsd.org Subject: Re: re(4) intermittent up/down Message-ID: <CAETxY=or4odiqAsXtF2T=jrBz3DcaeQ2zB8M-u-dTkGf9WE7-Q@mail.gmail.com> In-Reply-To: <20120224044000.GF13815@michelle.cdnetworks.com> References: <CAETxY=o%2BxXREgSY2YaHWeToSJ8TFFkqLHxLLJnFU_KEkZKO=PA@mail.gmail.com> <20120224044000.GF13815@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 24, 2012 at 11:40 AM, YongHyeon PYUN <pyunyh@gmail.com> wrote: > On Thu, Feb 23, 2012 at 04:57:27AM +0700, Nugroho Atmotaruno wrote: >> Hi all, >> >> I'm using FBSD 9.0-RELEASE with TPLink TG-3268 (rl8169) flapping >> (UP/DOWN every several seconds). >> >> [nugroho@xtreme ~]$ uname -a >> FreeBSD xtreme.arc.itb.ac.id 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue >> Jan?? 3 07:46:30 UTC 2012 >> root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC?? amd64 >> >> [root@xtreme ~]# tail /var/log/messages >> Feb 23 04:47:05 xtreme kernel: re0: link state changed to UP >> Feb 23 04:47:07 xtreme kernel: re0: link state changed to DOWN >> Feb 23 04:47:10 xtreme kernel: re0: link state changed to UP >> Feb 23 04:47:16 xtreme kernel: re0: link state changed to DOWN >> Feb 23 04:47:19 xtreme kernel: re0: link state changed to UP >> Feb 23 04:47:20 xtreme kernel: re0: link state changed to DOWN >> Feb 23 04:47:23 xtreme kernel: re0: link state changed to UP >> Feb 23 04:48:44 xtreme kernel: re0: link state changed to DOWN >> Feb 23 04:48:47 xtreme kernel: re0: link state changed to UP >> >> >> [root@xtreme ~]# pciconf -lcv >> re0@pci0:2:5:0: class=3D0x020000 card=3D0x816910ec chip=3D0x816910ec rev= =3D0x10 hdr=3D0x00 >> =C2=A0 =C2=A0 vendor =C2=A0 =C2=A0 =3D 'Realtek Semiconductor Co., Ltd.' >> =C2=A0 =C2=A0 device =C2=A0 =C2=A0 =3D 'RTL-8169 Gigabit Ethernet' >> =C2=A0 =C2=A0 class =C2=A0 =C2=A0 =C2=A0=3D network >> =C2=A0 =C2=A0 subclass =C2=A0 =3D ethernet >> =C2=A0 =C2=A0 cap 01[dc] =3D powerspec 2 =C2=A0supports D0 D1 D2 D3 =C2= =A0current D0 >> >> [root@xtreme ~]# devinfo -rv | grep rg >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 rgephy0 pnpinfo = oui=3D0xe04c model=3D0x11 rev=3D0x3 at phyno=3D1 >> >> [root@xtreme ~]# ifconfig re0 >> re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1= 500 >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 options=3D389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_H= WTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 ether f8:d1:11:04:15:d6 >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet 167.205.3.4 netmask 0xffffff80 broadcas= t 167.205.3.127 >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet6 fe80::fad1:11ff:fe04:15d6%re0 prefixle= n 64 scopeid 0x7 >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet6 2403:8000:1:1880::4 prefixlen 64 >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 media: Ethernet autoselect (1000baseT <full-= duplex>) >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 status: active >> > > Would you try attached patch? Thanks for your reply, I'll try it tomorrow. --=20 Regards, Nugroho
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAETxY=or4odiqAsXtF2T=jrBz3DcaeQ2zB8M-u-dTkGf9WE7-Q>