Date: Wed, 2 May 2007 11:57:01 -0400 From: Jung-uk Kim <jkim@FreeBSD.org> To: CQ CQ de Jason <jason@FreeBSD.csie.nctu.edu.tw> Cc: freebsd-stable@FreeBSD.org Subject: Re: bge watchdog timeout -- resetting problem on recent update Message-ID: <200705021157.04509.jkim@FreeBSD.org> In-Reply-To: <20070502015353.70E687F150@FreeBSD.csie.nctu.edu.tw> References: <20070502015353.70E687F150@FreeBSD.csie.nctu.edu.tw>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 01 May 2007 09:53 pm, CQ CQ de Jason wrote: > Dear Kim, > > >> 2. using latest(2007/04) 7-current source does not have this > >> problem. > > > > That's weird. The only difference between -CURRENT and -STABLE > > is this: > > > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bge.c.di > >ff?r1=1.91.2.21;r2=1.186 > > > > Are you sure it is okay with -CURRENT? > > There is something strange here. The server model is IBM e326m AMD > Opteron. But 6.2 & 7 get the different bge chipset model number. > > 6.2-STABLE > uname -a > FreeBSD ccsun51.cc.ntu.edu.tw 6.2-STABLE-200704 FreeBSD > 6.2-STABLE-200704 #0: Sun Apr 1 08:57:24 UTC 2007 > root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP amd64 > > bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem > 0xe8210000-0xe821ffff,0xe82000 00-0xe820ffff irq 26 at device 4.0 > on pci4 > > 7.0-CURRENT > uname -a > FreeBSD ccsun50.cc.ntu.edu.tw 7.0-CURRENT-200704 FreeBSD > 7.0-CURRENT-200704 #0: Sun Apr 1 12:57:43 UTC 2007 > root@stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > > bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. > 0x8003> mem 0xe 8210000-0xe821ffff,0xe8200000-0xe820ffff irq 26 at > device 4.0 on pci4 miibus0: <MII bus> on bge0 > brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseTX, 1000baseTX -FDX, auto They are actually the same chipset, i.e., both ASIC's are 0x8003. -STABLE does not have VPD support, so it prints driver built-in model number while -CURRENT prints VPD product information. JK
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705021157.04509.jkim>