Date: Wed, 05 Mar 2014 12:33:11 +0100 From: Rick van der Zwet <info@rickvanderzwet.nl> To: John Hay <jhay@meraka.org.za>, freebsd-embedded@freebsd.org Subject: Re: embedded board with 3 X wireless Message-ID: <53170B77.1060607@rickvanderzwet.nl> In-Reply-To: <20140305105917.GA55874@zibbi.meraka.csir.co.za> References: <20140305105917.GA55874@zibbi.meraka.csir.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/03/14 11:59, John Hay wrote:> We have been using AVILA, xscale arm based boards with 4 X MiniPCI slots > for a long time now. They are getting EOL and I was wondering what to > replace it with. Any ideas? Here is my short list of requirements: > > - Run FreeBSD > - Boot from itself, even if you need to add some flash. We used CF on AVILA. > - Possible to have 3 X wireless. It can be a mix of builtin and some form > of expansion. Wireless needs an antenna connector so that an > external antenna can be connected. > - 1 X Ethernet. More won't hurt, but is not needed. > - 128MB RAM or more. Look at the ALIX boards, like http://www.pcengines.ch/alix2d2.htm if you are OK with using USB->WiFi Dongles. Best regards, /Rick -- http://rickvanderzwet.nl
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53170B77.1060607>