Date: Wed, 16 Mar 2011 14:20:19 -0700 From: Garrett Cooper <yanegomi@gmail.com> To: Freddie Cash <fjwcash@gmail.com> Cc: FreeBSD-Current <freebsd-current@freebsd.org> Subject: Re: How does one get a working serial console with gptboot? Message-ID: <AANLkTikmxT8Eh2rURR2%2B%2BXL7on2qMUV%2B0HROscXTUJUf@mail.gmail.com> In-Reply-To: <AANLkTimamff1m%2BnkNRSENCsvKB8YKGfmVtcPN3VAX9yy@mail.gmail.com> References: <AANLkTinLPQ5BS7sHv_0=M8iYevS9nsvTqBfY71MjRj=1@mail.gmail.com> <AANLkTimamff1m%2BnkNRSENCsvKB8YKGfmVtcPN3VAX9yy@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Mar 16, 2011 at 10:20 AM, Freddie Cash <fjwcash@gmail.com> wrote: > On Wed, Mar 16, 2011 at 9:49 AM, Freddie Cash <fjwcash@gmail.com> wrote: >> I feel like an idiot right now because I can just not figure out how >> to make $subject work on a -CURRENT system. =A0:( >> >> I've read through the Handbook chapter on this. =A0I've done the process >> I've used with 8.x systems. =A0But once the kernel loads, the serial >> console stops working. =A0I'm obviously missing a step somewhere. >> >> Here's what I've done. =A0Please point out my error(s): >> >> /boot/loader.conf: >> =A0 =A0hint.uart.0.disabled=3D"0" >> =A0 =A0hint.uart.0.flags=3D"0x30" >> =A0 =A0console=3D"comconsole vidconsole" >> =A0 =A0comconsole_speed=3D"115200" >> =A0 =A0boot_multicons=3D"yes" >> >> /etc/make.conf: >> =A0 =A0BOOT_COMCONSOLE_PORT=3D0x3F8 >> =A0 =A0BOOT_COMCONSOLE_SPEED=3D115200 > > Nevermind. =A0PEBCAK error. =A0Adding the right port address would work. > Amazing how easy it is to mixup a 3 and an E. =A0:( Are you referring to the .flags value or the BOOT_COMCONSOLE_PORT value? Thanks, -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTikmxT8Eh2rURR2%2B%2BXL7on2qMUV%2B0HROscXTUJUf>