Date: Sat, 26 Jul 2014 13:09:09 +0900 (JST) From: YAMAMOTO Shigeru <shigeru@os-hackers.jp> To: freebsd-arm@freebsd.org Subject: dmesg on RaspberryPi Type B+ Message-ID: <20140726.130909.1154868204943313876.shigeru@os-hackers.jp>
next in thread | raw e-mail | index | archive | help
----Next_Part(Sat_Jul_26_13_09_09_2014_456)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, all, I get a New RaspberryPi, RaspberryPi Type B+. I make new SD image and I test it on RaspberryPi Type B+. There is no problem. My SD images is at http://freebsd-current.os-hackers.jp/pub/FreeBSD/snapshots/20140725/raspberry-pi/ Next, I test newest SD image at http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0/FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20140701-r268111.img.bz2. It can't detect USB Ethernet device. It seems me to need change firmware to newer at, https://github.com/raspberrypi/firmware Thanks, --- YAMAMOTO Shigeru <shigeru@os-hackers.jp> ----Next_Part(Sat_Jul_26_13_09_09_2014_456)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="raspberrypib+.dmesg.txt" KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 r269079M: Fri Jul 25 13:39:57 JST 2014 root@nemesis.os-hackers.jp:/root/rpi/build/work/obj/arm.armv6/root/rpi/build/work/src/sys/RPI-B-VIMAGE arm FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: init without driver. CPU: ARM1176JZ-S rev 7 (ARM11J core) Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext WB enabled LABT branch prediction enabled 16KB/32B 4-way instruction cache 16KB/32B 4-way write-back-locking-C data cache real memory = 536866816 (511 MB) avail memory = 498728960 (475 MB) WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. random: <Software, Yarrow> initialized kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0 intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0 Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000 Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000 bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0 gpio0: ACT LED at gpio0, pin 16 gpio0: read-only pins: 46,47,48,49,50,51,52,53. gpio0: reserved pins: 48,49,50,51,52,53. gpioc0: <GPIO controller> on gpio0 gpiobus0: <OFW GPIO bus> on gpio0 gpioled0: <GPIO led> at pin(s) 16 on gpiobus0 iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0 spibus0: <OFW SPI bus> on spi0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0 uart0: console (115200,n,8,1) dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0 usbus0 on dwcotg0 fb0: <BCM2835 VT framebuffer driver> on ofwbus0 simplebus1: <Flattened device tree simple bus> on ofwbus0 simplebus1: could not get ranges device_attach: simplebus1 attach returned 6 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 ugen0.1: <DWCOTG> at usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 1 port with 1 removable, self powered ugen0.2: <vendor 0x0424> at usbus0 uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0 uhub1: MTT enabled mmcsd0: 2GB <SD 00000 1.0 SN 3420118712 MFG 05/2014 by 27 SM> at mmc0 25.0MHz/1bit/65535-block fb0: 656x416(0x0@0,0) 16bpp fb0: pitch 1312, base 0x5f005000, screen_size 545792 fbd0 on fb0 VT: initialize with new VT driver "fb". random: unblocking device. Root mount waiting for: usbus0 uhub1: 5 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x0424> at usbus0 smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 Trying to mount root from ufs:/dev/ufs/root20140725 [rw,noatime]... smsc0: chip 0xec00, rev. 0002 WARNING: / was not properly dismounted miibus0: <MII bus> on smsc0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: <USB Ethernet> on smsc0 ue0: Ethernet address: b8:27:eb:50:ce:e0 warning: no time-of-day clock registered, system time will not be set accurately gpio0: tern on ACT LED smsc0: chip 0xec00, rev. 0002 ----Next_Part(Sat_Jul_26_13_09_09_2014_456)----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140726.130909.1154868204943313876.shigeru>