Date: Sat, 1 Jun 2002 03:36:49 -0400 (EDT) From: Fuzzy <fuzzy@pooh.ASARian.org> To: freebsd-questions@FreeBSD.ORG Subject: how to setup on board audio? Message-ID: <Pine.BSF.4.44.0206010317520.79063-100000@pooh.ASARian.org>
next in thread | raw e-mail | index | archive | help
chip2: <VIA 82C686 AC97 Audio>
port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff
irq 12 at device 7.5 on pci0
the kernel found the on board audio, but I don't
know what else I need to add to the kernel or define
in /dev to do sound?
thanks
Fuz
{dmesg after a reboot}
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #14: Sat Mar 9 02:11:16 EST 2002
root@pooh.ASARian.org:/usr/src/sys/compile/POOH
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (801.42-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x631 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,
MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257925120 (251880K bytes)
Preloaded elf kernel "kernel" at 0xc0359000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdce0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f
at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip2: <VIA 82C686 AC97 Audio>
port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff
irq 12 at device 7.5 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 10
ahc0: <Adaptec aic7850 SCSI adapter>
port 0xdc00-0xdcff mem 0xd9000000-0xd9000fff
irq 11 at device 10.0 on pci0
ahc0: Host Adapter Bios disabled.
Using default SCSI device parameters
aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
rl0: <RealTek 8139 10/100BaseTX>
port 0xe000-0xe0ff mem 0xd9001000-0xd90010ff
irq 12 at device 11.0 on pci0
rl0: Ethernet address: 00:e0:7d:a8:cf:5d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)>
port 0xe400-0xe41f irq 10 at device 13.0 on pci0
ed0: address 00:00:c5:3c:39:53, type NE2000 (16 bit)
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at
port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP packet filtering initialized, divert enabled,
rule-based forwarding enabled,
default to accept, unlimited logging
DUMMYNET initialized (010124)
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA33
ad3: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata1-slave UDMA33
acd0: CD-RW <CD-W54E> at ata0-slave using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 4 lun 0
da0: <SyQuest EZ135S 1-17> Removable Direct Access SCSI-2 device
da0: 5.000MB/s transfers (5.000MHz, offset 15)
da0: 128MB (262144 512 byte sectors: 64H 32S/T 128C)
da1 at ahc0 bus 0 target 5 lun 0
da1: <SyQuest EZ135S 1-17> Removable Direct Access SCSI-2 device
da1: 5.000MB/s transfers (5.000MHz, offset 15)
da1: 128MB (262144 512 byte sectors: 64H 32S/T 128C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.44.0206010317520.79063-100000>