Date: Thu, 27 Feb 1997 11:11:27 -0700 (MST) From: Steve Grandi <grandi@noao.edu> To: FreeBSD-gnats@freefall.freebsd.org, freebsd-bugs@freefall.freebsd.org Subject: Re: kern/2828: Adaptec 2940 Ultra cannot see Exabyte 8505 and loops during boot Message-ID: <199702271811.LAA03058@apus.tuc.noao.edu>
next in thread | raw e-mail | index | archive | help
Rob Nelson <rob@mag-net.com> suggested that I tell the Adaptec BIOS to not
try Wide transfers with the Exabyte. I did as he suggested and Exabyte was
found fine! Thanks Rob!
Steve Grandi, grandi@noao.edu
FreeBSD 2.2-970225-GAMMA #0: Wed Feb 26 11:56:29 MST 1997
grandi@new-www.tuc.noao.edu:/usr/src/sys/compile/WWW
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 199436527 Hz, i8254 clock: 1193211 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping=7
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 100663296 (98304K bytes)
avail memory = 94969856 (92744K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:11
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:1:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
sd0(ahc0:1:0): Direct-Access 8681MB (17780058 512 byte sectors)
(ahc0:2:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
sd1(ahc0:2:0): Direct-Access 8681MB (17780058 512 byte sectors)
(ahc0:3:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
sd2(ahc0:3:0): Direct-Access 8681MB (17780058 512 byte sectors)
ahc0:A:5: refuses WIDE negotiation. Using 8bit transfers
(ahc0:5:0): "MATSHITA CD-ROM CR-506 8S04" type 5 removable SCSI 2
cd0(ahc0:5:0): CD-ROM cd present [253530 x 2048 byte records]
(ahc0:6:0): "EXABYTE EXB-85058SQANXR1 07T0" type 1 removable SCSI 2
st0(ahc0:6:0): Sequential-Access density code 0x0, drive empty
vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 10 on pci0:15
mii[*mii*] address 00:60:97:6e:a4:d6
vga0 <VGA-compatible display device> rev 65 on pci0:17
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
changing root device to sd0a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702271811.LAA03058>