Date: Thu, 11 Mar 1999 17:23:04 -0400 From: Victor Salaman <salaman@teknos.com> To: 'Scott Mitchell' <rsm@acm.org> Cc: "'freebsd-mobile@freebsd.org'" <freebsd-mobile@freebsd.org>, "'freebsd-xircom@lovett.com'" <freebsd-xircom@lovett.com> Subject: Cards I have tested with the Xircom driver Message-ID: <608F4F76C94DD211B93100805F29063A8D8F@TEKNOS>
next in thread | raw e-mail | index | archive | help
CEM2 (CreditCard Ethernet+Modem) (sometimes doesn't work)
------
Code 136 not found
Code 136 not found
code Unknown ignored
Code 137 not found
Code 137 not found
code Unknown ignored
code Manufacturer ID ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 49
000: 04 01 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 45 74 68 65 72 6e 65 74 2b 4d 6f 64
020: 65 6d 20 49 49 00 43 45 4d 32 00 31 2e 30 30 00
030: ff
Version = 4.1, Manuf = [Xircom],card vers = [CreditCard
Ethernet+Modem II]
Addit. info = [CEM2],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 49 52 7e 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 8
000: 04 06 00 80 c7 49 52 7e
Tuple #6, code = 0x0 (Null tuple), length = 5
000: 05 01 0a 11 42
Tuple #7, code = 0x44 (Card init date), length = 4
000: 3c 8c 49 1e
Tuple #8, code = 0x1a (Configuration map), length = 5
000: 01 03 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x3
Registers: XX------
Tuple #9, code = 0x1b (Configuration entry), length = 23
000: c0 c1 bd 0f 55 c5 19 55 3e e0 17 17 ea 60 f8 03
010: 07 70 bc 86 20 00 20
Config index = 0x0(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4 x 1V, ext = 0x19
Maximum operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12
Memory space length = 0xf860
Max twin cards = 3
Misc attr:
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 01 08 ea 60 f8 02 07
Config index = 0x1
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 02 08 ea 60 e8 03 07
Config index = 0x2
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #12, code = 0x1b (Configuration entry), length = 7
000: 03 08 ea 60 e8 02 07
Config index = 0x3
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #13, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #14, code = 0x22 (Functional EXT), length = 4
000: 00 00 0f 7c
Serial interface extension:
8250 UART, Parity - Space,Mark,Odd,Even,
Tuple #15, code = 0x22 (Functional EXT), length = 9
000: 01 1f 3f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #16, code = 0x22 (Functional EXT), length = 12
000: 02 00 06 3e 0f 03 03 08 03 00 00 b5
Data modem services available:
Tuple #17, code = 0x22 (Functional EXT), length = 8
000: 03 00 06 0e 00 00 00 b5
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found
[CreditCard 10/100]
--------------------------
Code 136 not found
Code 136 not found
code Unknown ignored
code Manufacturer ID ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 44
000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31
020: 30 2f 31 30 30 00 31 2e 30 30 00 ff
Version = 5.0, Manuf = [Xircom],card vers = [CreditCard 10/100]
Addit. info = [CE3-10/100],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 51 f4 95 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 5
000: 05 01 0a 01 43
Tuple #6, code = 0x44 (Card init date), length = 4
000: 0b 3e 2b 21
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 01 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x1
Registers: XX------
Tuple #8, code = 0x1b (Configuration entry), length = 25
000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60
010: 00 00 0f 70 bc 8e 10 00 20
Config index = 0x1(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 3.5 x 100mA
Max current average over 1 second: 4 x 100mA
Max current average over 10 ms: 4 x 100mA
Power down supply current: 1 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12
Memory space length = 0x60
Max twin cards = 0
Misc attr:
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 80 c7 51 f4 95
Voice services available:
Tuple #11, code = 0x22 (Functional EXT), length = 2
000: 01 02
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 5
000: 02 80 96 98 00
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 5
000: 02 00 e1 f5 05
Data modem services available:
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 03 01
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 03 03
Tuple #16, code = 0x22 (Functional EXT), length = 2
000: 05 00
Modem interface capabilities:
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
[Compaq Card]
--------------------------------------------
Code 136 not found
Code 136 not found
code Unknown ignored
code Manufacturer ID ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 53
000: 05 00 43 6f 6d 70 61 71 00 4e 65 74 65 6c 6c 69
010: 67 65 6e 74 20 31 30 2f 31 30 30 20 50 43 20 43
020: 61 72 64 00 43 50 51 2d 31 30 2f 31 30 30 00 31
030: 2e 30 30 00 ff
Version = 5.0, Manuf = [Compaq],card vers = [Netelligent 10/100 PC
Card]
Addit. info = [CPQ-10/100],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 80 f6 00 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 5
000: 83 01 0a 01 43
Tuple #6, code = 0x44 (Card init date), length = 4
000: da 6c 4e 24
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 01 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x1
Registers: XX------
Tuple #8, code = 0x1b (Configuration entry), length = 25
000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60
010: 00 00 0f 70 bc 8e 10 00 20
Config index = 0x1(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 3.5 x 100mA
Max current average over 1 second: 4 x 100mA
Max current average over 10 ms: 4 x 100mA
Power down supply current: 1 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12
Memory space length = 0x60
Max twin cards = 0
Misc attr:
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 80 5f d8 f6 80
Voice services available:
Tuple #11, code = 0x22 (Functional EXT), length = 2
000: 01 02
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 5
000: 02 80 96 98 00
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 5
000: 02 00 e1 f5 05
Data modem services available:
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 03 01
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 03 03
Tuple #16, code = 0x22 (Functional EXT), length = 2
000: 05 00
Modem interface capabilities:
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
-----Original Message-----
From: Scott Mitchell [mailto:rsm@acm.org]
Sent: Tuesday, March 09, 1999 1:42 PM
To: Victor Salaman
Subject: Xircom driver
On Tue, Feb 02, 1999 at 01:55:07PM -0400, Victor Salaman wrote:
> I have tested on a Compaq Card 10/100, a CE3 Card and a CE2.... and it
> works...
Hi Victor,
Sorry to bother you again; I'm trying to clear out all the unresolved mail
in my Xircom box. Could you confirm that the driver does in fact work on
all of the cards you listed above? It would also be helpful if you could
mail me a copy of the 'pccardc dumpcis' output for each of those cards, for
comparison with hardware that doesn't work :(
The best thing is probably to send these to the mailing list at
<freebsd-xircom@lovett.com> so the other folks hacking on the driver get to
see them as well.
Have you tried the newer versions of the driver yet? The media selection
is (mostly) working now so it should be more pleasant to use.
Many thanks in advance,
Scott
--
===========================================================================
Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just
<scott@dcs.qmw.ac.uk> | 0x54B171B9 | like a dried up piece of roast goat"
QMW College, London, UK | 0xAA775B8B | -- J. S. Bach.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?608F4F76C94DD211B93100805F29063A8D8F>