Date: Fri, 9 May 2008 08:29:38 -0400 (EDT) From: Randy Schultz <schulra@earlham.edu> To: freebsd-amd64@freebsd.org Cc: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Re: amd64/123495: 7.0 AMD64 doesn't install on a Dell SC1435 Message-ID: <Pine.BSF.4.64.0805090742140.33827@tdream.lly.earlham.edu> In-Reply-To: <48236995.4060707@delphij.net> References: <200805071621.m47GLbCD018315@www.freebsd.org> <48221188.3020708@wenks.ch> <Pine.BSF.4.64.0805080816220.27199@tdream.lly.earlham.edu> <48236995.4060707@delphij.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 8 May 2008, Xin LI spaketh thusly:
-}Could you please show your 'pciconf -lv | grep -A3 ata' output?
-}
-}My 1435 says:
-}
-}atapci1@pci0:2:1: class=0x01018a card=0x01eb1028 chip=0x02141166
-}rev=0x00 hdr=0x00
-}~ vendor = 'ServerWorks (Was: Reliance Computer Corp)'
-}~ class = mass storage
-}~ subclass = ATA
-}- --
-}atapci0@pci3:14:0: class=0x01018f card=0x01eb1028 chip=0x024b1166
-}rev=0x00 hdr=0x00
-}~ vendor = 'ServerWorks (Was: Reliance Computer Corp)'
-}~ class = mass storage
-}~ subclass = ATA
-}
-}But it's an SC1435 with SAS disks I believe, so things may different.
-}Also, will it be possible if you find some output from vmstat -i?
Certainly. The system is up on 6.3 right now so this is simple. ;>
Dude ? pciconf -lv | grep -A3 ata
atapci1@pci0:2:1: class=0x01018a card=0x01eb1028 chip=0x02141166 rev=0x00
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'HT1000 Legacy IDE controller'
class = mass storage
--
atapci0@pci3:14:0: class=0x01018f card=0x01eb1028 chip=0x024b1166 rev=0x00
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5785 (HT1000) PATA/IDE Mode'
class = mass storage
I had the SAS card in it but I needed to pull it because I needed to put a
SCSI card in for the autochanger(testing fbsd with bacula).
Here's the vmstat output:
Dude ? vmstat -i
interrupt total rate
irq1: atkbd0 18 0
irq6: atapci0 1543 0
irq9: acpi0 2 0
irq11: ohci0 ohci+ 12 0
irq14: ata0 47 0
irq33: bge0 14935 7
irq38: ahc0 138 0
irq39: ahc1 23 0
cpu0: timer 4127540 1998
Total 4144258 2006
I wasn't aware of the pciconf command. It's kinda cool. Now I'm wondering if
I can use it to write the proper data to the configuration register telling it
to not be in PATA mode. OTOH, the potential to do improper things seems great
so this is a bit scary<so I'm open to all thoughts ;>.
I wonder if the dell is feeding bogus data to fbsd 7, or fbsd 7 is
misinterpreting what it's getting from the dell?
--
Randy (schulra@earlham.edu) 765.983.1283 <*>
Love with your heart, think with your head; not the other way around.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.64.0805090742140.33827>