Date: Mon, 26 Sep 2005 14:07:30 -0400 From: John Baldwin <jhb@FreeBSD.org> To: freebsd-amd64@freebsd.org, freebsd@sopwith.solgatos.com Subject: Re: dmesg from Tyan Tomcat K8E 2865 Message-ID: <200509261407.31090.jhb@FreeBSD.org> In-Reply-To: <200509240414.EAA06328@sopwith.solgatos.com> References: <200509240414.EAA06328@sopwith.solgatos.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 23 September 2005 04:14 pm, Dieter wrote: > Tyan Tomcat K8E 2865 running FreeBSD 6.0 beta 3 > Here's the stuff from dmesg that doesn't look quite right: > > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR Don't worry about these unless something is broken. > pci0: <memory> at device 0.0 (no driver attached) > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) You probably don't need any drivers for these. > pci0: <multimedia, audio> at device 4.0 (no driver attached) This is your sound card. No idea if any of the pcm(4) drivers support the sound on the nForce 4. > pci_link3: BIOS IRQ 10 does not match initial IRQ 5 Unless something is not working and you are getting an interrupt storm or some such, don't worry about this message. > pci1: <display, VGA> at device 5.0 (no driver attached) If you use DRI, X will load a device driver that will attach here as drm0. Other than that, you don't need a device driver for this device for basic console video to work. > Suggestions on how to fix any of those would be welcome. None of these messages indicate any actual problems. Are you having any problems? -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509261407.31090.jhb>