Date: Sun, 21 Apr 2002 11:43:35 -0700 From: rob <rob@pythonemproject.com> To: Paul Schenkeveld <fb-mobile@psconsult.nl> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: CD/CD-RW drive not working on Dell Inspiron 7500 Message-ID: <3CC30856.FB7ADC25@pythonemproject.com> References: <Pine.BSF.4.21.0110171515130.77938-100000@world.tonkinresolutions.com> <20020418135020.A66864@psconsult.nl> <20020421171008.A2998@psconsult.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Glad you got it working. Somewhere either on the web or mailing lists I once saw a rating for CDR and CDRW media based on the color of the burning layer. So you could go to a store and look and see what color it was before buying it. Rob. Paul Schenkeveld wrote: > > Hi All, > > Thanks to Brian, Lars and Rob for pointing at my media. Although > the error messages suggest unsupported commands being sent to the > driver or the drive, the media seems to be the culprit. > > I was able to write to a Sony CD-RW certified for 1x, 2x and 4x > speed. Writing to an Imation 4x-10x speed CD-RW doesn't work at > any speed however (although Dell specifies the drive as 8x speed). > I also tried using the Dell supplied software under XP (sorry, I > hate that but I just wanted to be sure) with the same results. > > I also wasn't able to write audio to any media. Burncd always > replies: > > $ burncd -s 1 audio track001.raw > writing from file track001.raw size 36111 KB > > only wrote -1 of 37632 bytes > > and the console barks at me: > > acd0: WRITE_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00 > > My kernel is a RELENG_4_5 (pl 3) because a RELENG_4 kernel cannot > access my CD-RW drive at all (get a device not configured error > although acd0 appears in dmesg). > > So far I can live with this situation as burning audio is not > really important to me and I think I'll just throw away the > Imation media and get some more Sony 1x-4x media to work with. > > Regards, > > Paul Schenkeveld > > On Thu, Apr 18, 2002 at 01:50:21PM +0200, Paul Schenkeveld wrote: > > Hi Nick, FreeBSD community, > > > > I just got a Dell Inspiron showing the same error messages under > > FreeBSD 4.5 pl3. Since I saw no followup with a solution I was > > wondering whether you got the CD/RW to work (ie. to write writable > > and rewritable media). > > > > I can mount and read CDs and a CDRW written on a Yamaha SCSI burner > > but 'burncd msinfo' and 'burncd blank' already give errors. From > > my kernel config: > > > > device ata0 at isa? port IO_WD1 irq 14 > > device ata1 at isa? port IO_WD2 irq 15 > > device ata > > device atadisk # ATA disk drives > > device atapicd # ATAPI CDROM drives > > #evice atapifd # ATAPI floppy drives > > #evice atapist # ATAPI tape drives > > > > >From /var/log/messages: > > > > Apr 18 11:35:41 i4100 /kernel: acd0: CD-RW <HL-DT-ST CD-RW GCE-8080N> at ata1-master using PIO4 > > Apr 18 13:30:37 i4100 /kernel: acd0: READ_BIG - MEDIUM ERROR asc=02 ascq=00 error=00 > > Apr 18 13:31:34 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00 > > Apr 18 13:31:44 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00 > > Apr 18 13:33:43 i4100 /kernel: acd0: BLANK_CMD - ILLEGAL REQUEST asc=64 ascq=00 error=00 > > > > Bye, > > > > Paul Schenkeveld > > > > On Wed, Oct 17, 2001 at 03:17:22PM -0700, Nick Tonkin wrote: > > > > > > Hello FreeBSD folks, > > > > > > I cannot get the CD-CD/RW drive to work under FreeBSD 4.4 on my Dell > > > inspiron 7500. I know this has been brought up before but I could not > > > find a solution. > > > > > > The CD drive is made by Matsushita I think, product number is UJDA310L > > > > > > Note that the behavior is different depending on whether or not there > > > is a disk in tghe drive at boot. When I start the machine with a disk in > > > it I get this: > > > > > > root@bomba ~>dmesg | grep -n acd0 > > > 78:acd0: CDROM <UJDA310 Program Loader> at ata1-master using PIO2 > > > 86:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 87:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 88:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 89:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 90:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > > > > ... and then: > > > > > > root@bomba ~>mount /cdrom > > > cd9660: /dev/acd0c: Input/output error > > > > > > ... whereas if I start the machine without a disk in it, I get: > > > > > > root@bomba ~>grep -n acd0 ~nick/foo > > > 78:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > > 167:acd0: CD-RW <UJDA310> a4 ata1-master using PIO4 > > > 256:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > > 351:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > > 358:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 359:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 360:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > 361:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > > > > ... and then I can open the drive OK, insert a disk, close the drive > > > manually (the drawer is not drawn in by the motor as with other CD-ROM > > > drives I have used, or as with this one under windoze), and then I get: > > > > > > root@bomba ~>mount /cdrom > > > cd9660: /dev/acd0c: Input/output error > > > ... followed by the same series of errors. > > > > > > Any help greatly appreciated. > > > > > > root@bomba ~>uname -a > > > FreeBSD bomba.rlnt.net 4.4-RELEASE FreeBSD 4.4-RELEASE #0: Wed Oct 17 > > > 12:59:32 > > > PDT 2001 root@bomba.rlnt.net:/usr/src/sys/compile/WITHSOUND i386 > > > > > > > > > ~~~~~~~~~~~ > > > Nick Tonkin > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-mobile" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- ----------------------------- The Numeric Python EM Project www.pythonemproject.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CC30856.FB7ADC25>