Date: Mon, 6 Sep 1999 21:21:38 +0200 From: Ollivier Robert <roberto@keltia.freenix.fr> To: freebsd-current@freebsd.org Subject: Re: another newpcm casualty Message-ID: <19990906212138.A86542@keltia.freenix.fr> In-Reply-To: <4.2.0.58.19990906065639.00a399c0@216.101.162.50>; from Manfred Antar on Mon, Sep 06, 1999 at 07:28:50AM -0700 References: <4.2.0.58.19990905171437.00a24aa0@216.101.162.50> <Pine.BSF.4.10.9909060856070.2081-100000@salmon.nlsystems.c om> <4.2.0.58.19990906065639.00a399c0@216.101.162.50>
next in thread | previous in thread | raw e-mail | index | archive | help
According to Manfred Antar:
> All I can think of is there must be a conflict with one of the other cards
> on the board.
> Matrox Millenium or the DPT Raid controller.
I have a ET6000-based card (see below) and no DPT.
FreeBSD 4.0-CURRENT #22: Sat Sep 4 22:40:07 CEST 1999
roberto@tara:/src/src/sys/compile/TARA_SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 61833216 (60384K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0318000.
Preloaded elf module "linux.ko" at 0xc031809c.
Preloaded elf module "green_saver.ko" at 0xc031813c.
Preloaded elf module "procfs.ko" at 0xc03181e0.
Preloaded elf module "vesa.ko" at 0xc0318280.
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc03151cc (100008c)
VESA: STB Lightspeed 128 Video (ET6000)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 18 at device 6.0 on pci0
fxp0: Ethernet address 00:a0:c9:49:5a:ef
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
chip1: <Intel PIIX3 IDE controller> at device 7.1 on pci0
uhci0: <Intel 82371SB (PIIX3) USB controller> irq 10 at device 7.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec aic7880 Ultra SCSI adapter> irq 17 at device 9.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
vga-pci0: <Tseng Labs ET6000 graphics accelerator> irq 18 at device 17.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <10 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
unknown0: <CTRL> on isa0
pcm0: <CS4236B> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
unknown1: <GAME> at port 0x200-0x207 on isa0
unknown2: <MPU> at port 0x330-0x331 irq 9 on isa0
APIC_IO: routing 8254 via 8259 on pin 0
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to da0s2a
da0 at ahc0 bus 0 target 6 lun 0
da0: <QUANTUM VIKING II 4.5WLS 4110> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
--
Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr
FreeBSD keltia.freenix.fr 4.0-CURRENT #73: Sat Jul 31 15:36:05 CEST 1999
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990906212138.A86542>