Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Feb 2004 02:26:42 -0700
From:      Scott Long <scottl@freebsd.org>
To:        Panagiotis Astithas <past@noc.ntua.gr>
Cc:        freebsd-current@freebsd.org
Subject:   Re: System still hangs with "ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE"
Message-ID:  <401E17D2.90609@freebsd.org>
In-Reply-To: <401E144C.3000706@noc.ntua.gr>
References:  <20040125111743.GA564@bsd> <401672F7.8080404@noc.ntua.gr> <4018F64A.2090906@noc.ntua.gr> <40196D90.5020604@compgeek.com> <401E144C.3000706@noc.ntua.gr>

next in thread | previous in thread | raw e-mail | index | archive | help
Panagiotis Astithas wrote:
> Jon Noack wrote:
> 
>> On 1/29/2004 6:02 AM, Panagiotis Astithas wrote:
>>
>>> I found out that booting with "Safe mode" (I knew there should be 
>>> some use for it :-)) allows me to complete the process and get to 
>>> sysinstall, in both 5.2-RELEASE & the -current snapshot from 24/1. 
>>> But I tried to do the same from the loader prompt, to no avail. I 
>>> used the following and then "boot" or "boot -v" but every attempt 
>>> resulted in the traditional freeze.
>>>
>>> unset acpi_load
>>> set hint.acpi.0.disabled=1
>>> set loader.acpi_disabled_by_user=1
>>> set hw.ata.ata_dma=0
>>> set hw.ata.atapi_dma=0
>>> set hw.ata.wc=0
>>> set hw.eisa_slots=0
>>>
>>>  From what I can tell from the beastie.4th file, that is all that 
>>> should be needed. Am I missing something?
>>
>>
>>
>> You missed disabling apic:
>> set hint.apic.0.disabled=1
> 
> 
> Bingo!
> But I still can't see how it is being set via the loader's "Safe mode" 
> option. Granted, my forth skills are lacking, but an inquiring mind 
> needs to know :-)
> 
> Thanks,


Look for this segment in beastie.4th:


         dup bootsafekey @ = if
                 s" arch-i386" environment? if
                         s" acpi_load" unsetenv
                         s" 1" s" hint.acpi.0.disabled" setenv
                         s" 1" s" loader.acpi_disabled_by_user" setenv
---->                   s" 1" s" hint.apic.0.disabled" setenv
                 then
                 s" 0" s" hw.ata.ata_dma" setenv
                 s" 0" s" hw.ata.atapi_dma" setenv
                 s" 0" s" hw.ata.wc" setenv
                 s" 0" s" hw.eisa_slots" setenv
                 0 boot
         then



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?401E17D2.90609>