Date: Mon, 29 Sep 2003 01:05:59 +0200 From: Andreas Kohn <andreas.kohn@gmx.net> To: Grant Peel <grant@thenetnow.com> Cc: freebsd-questions@freebsd.org Subject: Re: Bad Super Block Count Message-ID: <1064790358.939.33.camel@klamath> In-Reply-To: <00e501c38613$17612950$6501a8c0@grant> References: <008501c38606$6a725770$6501a8c0@grant> <00e501c38613$17612950$6501a8c0@grant>
next in thread | previous in thread | raw e-mail | index | archive | help
[redirected mail to list, remember to use reply-to-all] On Mon, 2003-09-29 at 00:51, Grant Peel wrote: > I am now 120 miles from the server. Since it seems that the root filesystem > has no errors, can I simply umount the other filesystems and run fsck, (it > will be able to write then?) and then reboot? > > TIA, > > > -Grant You could try it at least. But then you wouldn't even need to reboot, just remounting the drives with mount -a should bring them back. But I'm not completely sure about this. > Andreas Kohn wrote > > On Sun, 2003-09-28 at 23:20, Grant Peel wrote: > > > Hello all, > > > > > > One of my Dell servers has rebooted itself twice in the past week. No > panics > > > or anything showing in any log. No overheating noted in mbmon. I don't > know > > > if the diskstuff below is related. > > > > > > Dell called me and told me I had to do a PERC III ROM flash, so I went > to > > > the POP and did that. At that time I ran an fsck. I am seeing what look > to > > > be (I hope) none critical disk errors. I cant find anything specific in > the > > > FreeBSD archives and was hoping some here might have some knowledge. > > > > > > Here is the complete list from fsck, also I will post disklabel -r > output at > > > the bottom. > > > > > > As a side note, I could not get fsck to be interactive. Not even at the > > > console, but I was never in single user mode either...should it matter? > > > > As you can see, fsck is unable to write to your partitions (which is why > > it answers "no" to all questions). You should try to run fsck from > > single user mode. > > > > > > > > Dell 1400SC, 933Mhz, 512 MB, RAID5 PERC 3/DC. > > > > > > BTW, I ran a consistency check before booting back into FReeBSD and > > > according to the PERC software the stripes etc are perfect. > > > > -------------------------------------------------------------------------- > -- > > > ------------- > > > > > > enterprise# fsck > > > ** /dev/amrd0s1a (NO WRITE) > > ... > > > ** /dev/amrd0s1d (NO WRITE) > > ... > > > ** /dev/amrd0s1h (NO WRITE) > > ... > > > > -- > > Andreas Kohn <andreas.kohn@gmx.net> > > -- Andreas Kohn <andreas.kohn@gmx.net>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1064790358.939.33.camel>